User Panel
|
|
I'm going to try to fit my 6.5G build in this weekend, and that's where my 9" is going.
|
|
Quoted:
I'm going to try to fit my 6.5G build in this weekend, and that's where my 9" is going. View Quote |
|
Quoted:
Hopefully you get lucky and yours ships soon. I've got a 9" SAT, ordered 3/1, 7113xx, shipped yesterday with another MBT. ML must just be running batches of certain styles and lengths and shipping. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I'm going to try to fit my 6.5G build in this weekend, and that's where my 9" is going. |
|
ordered a 10" on 2/22 "crickets...."i waited almost 2 years on the first run of the predatobrs
|
|
My 9” should be here tomorrow! Pretty sure it won’t fit my billet Upper I have planned for it, but hey, that’s why God invented the Dremel
|
|
My 9.0 arrives next week. Shipped yesterday. I ordered close to release day.
|
|
|
|
Myself and a friend both revived out 13.2 SATs last week and get them installed. I was always a fan of the older rail, but the new sat just kicks it up a notch. Still feels like a tank, rock solid mounting setup, super clean finish and to top it off, the price. You just cant beat the price for this much rail. I also really like the way it feels in the hand(I actually like the + shape)
Absolutley love the rail and can't wait to get my 11 sat and 10 mlok one. Mark ya got a winner with this one. Will post up pics later |
|
|
Quoted: And do you have any first blush comments ? Does it appear to be worth what you paid for it ? . View Quote |
|
|
Quoted: And do you have any first blush comments ? Does it appear to be worth what you paid for it ? . View Quote |
|
|
Anybody got a link to instructions/video of this type of rail being installed? I already pulled off my fsb, gas tube, and delta ring assembly. Trying to see what else I may need or have to do to install this rail.
|
|
Quoted:
Anybody got a link to instructions/video of this type of rail being installed? I already pulled off my fsb, gas tube, and delta ring assembly. Trying to see what else I may need or have to do to install this rail. View Quote |
|
Quoted:
I was hoping for a decent video but I've yet to find one. The only 1 on YouTube is pretty rough around the edges. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Anybody got a link to instructions/video of this type of rail being installed? I already pulled off my fsb, gas tube, and delta ring assembly. Trying to see what else I may need or have to do to install this rail. |
|
I’m sure it’s not going to be terribly difficult, just wondering if I’m going to need any tools or special methods for the 2-pin barrel nut and anti-slip plate. Would’ve liked to have had the tools beforehand.
|
|
the 9" LAT I ordered is in transit,..gave the grandson an MBT for his rifle the other day and coached him through the install then showed him a pic of the LAT and SAT and asked which one he want he picked the LAT so we ordered up a 7",...told him it be here in 2 weeks
|
|
Quoted:
I’m sure it’s not going to be terribly difficult, just wondering if I’m going to need any tools or special methods for the 2-pin barrel nut and anti-slip plate. Would’ve liked to have had the tools beforehand. View Quote |
|
|
Quoted:
I’m sure it’s not going to be terribly difficult, just wondering if I’m going to need any tools or special methods for the 2-pin barrel nut and anti-slip plate. Would’ve liked to have had the tools beforehand. View Quote |
|
Quoted:
I'll make one when my rail comes... but it sounds like you are balls deep in there installation already, so that won't help you much. Also, I have no idea when to expect the 13.2" LAT that I ordered. View Quote installing a free float handguard |
|
View Quote I know how to install the rail, it comes with good enough instructions. I just prefer videos to go along with. I haven't found one shot with a camera from this century. |
|
Quoted: When was that video made, 1992? I know how to install the rail, it comes with good enough instructions. I just prefer videos to go along with. I haven't found one shot with a camera from this century. View Quote ETA: ... and like the pornography from my youth, the poor production values of the above video does not prevent it from having the desired effect. |
|
Quoted:
LAT 13.2 ordered. Now I just need a barrel to go in it. View Quote Attached File |
|
Quoted:
I used a 16" PredatAR barrel (w/ LaRue Tactical gas block) with mine. https://www.AR15.Com/media/mediaFiles/76904/001_JPG-898006.JPG View Quote View All Quotes View All Quotes Quoted:
Quoted:
LAT 13.2 ordered. Now I just need a barrel to go in it. https://www.AR15.Com/media/mediaFiles/76904/001_JPG-898006.JPG |
|
View Quote What upper receiver is that? No issues with keeper ring? |
|
Thanks. Aero M4E1. No issues with the ring. Install was straightforward and locks up real tight.
|
|
#708775 Completed for a 13.2. Looking forward to getting my hands on it.
|
|
Just received shipping notification for a 9 in LAT. Order number 708777
|
|
|
|
Any plans for the .5" increments? I'm sure this has been covered but figured I'd ask again.
7.5" , 9.5", and 10.5" especially needed IMO. |
|
View Quote . |
|
Quoted: Looks like every bit of $20 an inch. . View Quote I’m placing orders for more today |
|
Quoted:
”. It would still be a good deal @ $20/in. I’m very pleased with it. Noticeably more solid than the BCM MCMR offering and seems like less deflection than the Gayslee mk16 based on my super scientific push on the end of the rail testing. I’m placing orders for more today View Quote View All Quotes View All Quotes Quoted:
Quoted: Looks like every bit of $20 an inch. . It would still be a good deal @ $20/in. I’m very pleased with it. Noticeably more solid than the BCM MCMR offering and seems like less deflection than the Gayslee mk16 based on my super scientific push on the end of the rail testing. I’m placing orders for more today |
|
Order #720852, 13.5". Give it to me straight Doc, how bad is the wait?
The page didn't mention back order status. I'm patient. Next question I have converted everything else to MLOK but I have a LaRue 11" LT15 on one one of my rifles. So can I just mount the new handguard on the old barrel nut or do I have to swap everything? By the looks of the new one it should be a direct replacement. Am I assuming correctly? |
|
^ Yes, new handguard mounts to your existing Larue barrel nut and hardware.
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.