Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 4/29/2015 12:56:48 AM EDT
Anyone know any online stores that stock them? Every dealer I talk to where I live says they are all allocated, just wondering if anyone knows a good place to pick one up.
Link Posted: 4/29/2015 1:12:28 AM EDT
Will this work? check here
Link Posted: 4/29/2015 3:37:57 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By subinoob:
Will this work? check here
View Quote
oh, thanks I didn't know about this tracker site.
Link Posted: 4/29/2015 12:33:16 PM EDT
I just found one local gun shop for $584 its the one with the safety not the decocker could anyone just give me a rundown of what I gain or don't, etc..? A safety doesn't bother me, I just used to have a sig 226 and the decocker was a nice feature.
Link Posted: 4/29/2015 12:55:19 PM EDT
You get a better trigger with the safety, especially if you have any work done on it.

Plus, most people shoot CZs single action, because of the long initial trigger reach. Can you comfortable reach the double action trigger and shoot it adequately?

Older thread on this: https://www.ar15.com/archive/topic.html?b=5&f=37&t=149428
Link Posted: 4/29/2015 12:56:56 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Tod-13:
You get a better trigger with the safety, especially if you have any work done on it.

Plus, most people shoot CZs single action, because of the long initial trigger reach. Can you comfortable reach the double action trigger and shoot it adequately?

Older thread on this: https://www.ar15.com/archive/topic.html?b=5&f=37&t=149428
View Quote
Thank's, can't wait to pick it up.
Link Posted: 4/29/2015 2:11:16 PM EDT
Just one more question without going over board on upgrade parts I see cajun gun works is popular for the CZ, what would be the min you would recommend to upgrade from stock on the gun?

I really just want a nice clean trigger pull, that is not to heavy. Not worried about competition stuff, or any race parts.
Link Posted: 4/29/2015 2:28:20 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Shooter_Mc_Gavin:
Just one more question without going over board on upgrade parts I see cajun gun works is popular for the CZ, what would be the min you would recommend to upgrade from stock on the gun?

I really just want a nice clean trigger pull, that is not to heavy. Not worried about competition stuff, or any race parts.
View Quote

minimum would be a spring kit from CGW.

the 85C trigger, trigger pin and lighter trigger return spring from CGW are very nice as well. Not difficult to install and not very expensive.
Link Posted: 4/29/2015 2:42:15 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By wiseanhyzer:

minimum would be a spring kit from CGW.

the 85C trigger, trigger pin and lighter trigger return spring from CGW are very nice as well. Not difficult to install and not very expensive.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By wiseanhyzer:
Originally Posted By Shooter_Mc_Gavin:
Just one more question without going over board on upgrade parts I see cajun gun works is popular for the CZ, what would be the min you would recommend to upgrade from stock on the gun?

I really just want a nice clean trigger pull, that is not to heavy. Not worried about competition stuff, or any race parts.

minimum would be a spring kit from CGW.

the 85C trigger, trigger pin and lighter trigger return spring from CGW are very nice as well. Not difficult to install and not very expensive.
cool thanks.
Link Posted: 4/29/2015 3:08:26 PM EDT
There are so many parts, and packages on their site it is a bit confusing what combination is really the best I can see the spring kit, firing pin spring, pins, but like on the trigger they say unless you combo it with the new disconnect you wont get the shorter pull.

Then on one of their packages they say to get the true action job do the race hammer, etc... I have been searching forums looking for tips and answers, but I can do all the work here I gunsmith in Southern Louisiana. Any other info appreciated, just want to order all the parts and do the job at once, but not looking to sink $300+ in it for every part.
Link Posted: 4/29/2015 3:47:14 PM EDT
This place carries a lot of the higher grade CZ's : www.oakhillguns.com
Link Posted: 4/30/2015 9:54:59 AM EDT
[Last Edit: 4/30/2015 9:55:20 AM EDT by rsj1231]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By XM21Nick:
This place carries a lot of the higher grade CZ's : www.oakhillguns.com
View Quote


The folks at Oak Hill are GREAT. One of easiest purchases and they shipped very fast in my experience.

Also check out www.TechNetArmory.com and click on the CZ Sale link. The site isn't very good or high-tech but the man behind the scenes is very nice and was also a pleasure to deal with. He ships fast, doesn't charge a credit card fee and sometimes negotiates with price and shipping costs. Right now he has a special on the SP-01 Tactical's, $609.99 shipped.
Link Posted: 4/30/2015 8:48:45 PM EDT
I have installed the CGW Hammer spring, FP, FP spring, FP retaining pin, firing block spring,trigger spring, trigger pin and hammers in all my CZ pistols. On my 75BD & P-09(target pistols) I also installed the short reach and short reset.
For a minimum, put in what I did to all my CZs except the hammer if you want to save $'s.
Link Posted: 4/30/2015 8:51:34 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Firemanjones:
I have installed the CGW Hammer spring, FP, FP spring, FP retaining pin, firing block spring,trigger spring, trigger pin and hammers in all my CZ pistols. On my 75BD & P-09(target pistols) I also installed the short reach and short reset.
For a minimum, put in what I did to all my CZs except the hammer if you want to save $'s.
View Quote
I talked to Dave today there and he told me this is what he suggest for best performance without going through a full package.

1. Race hammer kit is what solves the SA trigger.
2. Spring kit is what solves the DA pull.

So he suggested the SPGK1 spring kit, Race Hammer Kit, X2 HPIN, RP-TRS return spring, TR-PIN trigger pin, LSpring (because it can be lost easily and they sell them cheap).
Link Posted: 4/30/2015 10:19:59 PM EDT
Good you called him, I was going to add that as well. He will not steer you wrong and will not oversell.
Top Top