Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 7/22/2001 1:02:05 PM EST
Link Posted: 7/22/2001 3:32:17 PM EST
Is this a recurring problem with 7.62x39mm AR's ???
Link Posted: 7/22/2001 3:48:08 PM EST
Looking at those side by side is very interesting. Not much metal left after opening the face up to accept the 762X39 rim. I wonder how often this does happen.
Link Posted: 7/22/2001 3:55:59 PM EST
Link Posted: 7/22/2001 5:06:02 PM EST
How many rounds on the .223?
Link Posted: 7/22/2001 5:42:03 PM EST
Link Posted: 7/22/2001 6:20:15 PM EST
Link Posted: 7/22/2001 6:23:42 PM EST
Link Posted: 7/22/2001 8:00:14 PM EST
Did you turn the inside of a .223 bolt to fit a 7.62x39 and use it in a 762x39 upper? If you did its a wonder that it lasted that long. The chamber of the 7.62 is also larger in diameter and would have backed up the bolt. That is why they have different sized bolts to fit the proper chamber. I wouldn't worry about the larger cals because the parts should be matched. The bolt for the 7.62 should look something like the one in a AR10 in size. Be careful when you try to modify things to use Ron
Link Posted: 7/23/2001 12:38:45 AM EST
[Last Edit: 7/23/2001 1:08:48 AM EST by Waldo]
Link Posted: 7/23/2001 12:55:19 AM EST
Link Posted: 7/23/2001 5:49:33 AM EST
Link Posted: 7/23/2001 7:59:14 AM EST
Someone on this board (?) did a Finite Stress Analyis on these bolts. The "missing" lug where the extractor sits places a huge stress on the lugs adjacent to the extractor. A way to reduce this peak stress is to equalize the load on the lugs - GRIND OFF the lug opposite the extractor.
Top Top