Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/10/2001 2:34:36 PM EST
Link Posted: 10/10/2001 2:42:59 PM EST
Just a guess,maybe the pressure[small amount]the rounds under the bolt.Big maybe.
Link Posted: 10/10/2001 3:50:31 PM EST
Thats a new one to me. I'd remove the stock and check that the sheetmetal magazine well is sitting properly in the groove of the receiver, then check the stock to see if there is any flashing in the mag well area left over from molding the stock, then check that the aluminum bedding block is still firmly molded into the stock. Torque the stock bolts to 65 inch-lbs when you reassemble the rifle, and see if the problem went away.
Link Posted: 10/10/2001 3:58:46 PM EST
I've heard of zeros changing with different mags in an AR. Are the locking lugs bearing weird? Bolt pressure??? Just random stabing. HTH
Top Top