Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/22/2017 10:05:29 PM
Arrow Left Previous Page
Page / 3
Posted: 9/24/2004 7:25:55 PM EST
Tec-9 for me...couldn't shoot straight to save my life with that gun!!! The biggest/only POS I have ever had. On the plus side it did have an evil high capacity clip
Link Posted: 9/24/2004 7:26:33 PM EST
My Hesse FAL. The piston broke after shooting 20 rounds.
Link Posted: 9/24/2004 7:27:20 PM EST
None so far.
Link Posted: 9/24/2004 7:27:21 PM EST
I was really close to buying a Hi-Point carbine when I found this place. WHEW!
Link Posted: 9/24/2004 7:27:39 PM EST
CLIP?? CLIP??

WHERE DID YOU GET A TEC9 IN 30.06?

<overload>
Link Posted: 9/24/2004 7:28:09 PM EST
I had an old revolver. Wrorth nothing, wouldn't shoot, sometimes didn't fire. Got rid of it. Thank god.
Link Posted: 9/24/2004 7:28:16 PM EST

Originally Posted By JCKnife:
I was really close to buying a Hi-Point carbine when I found this place. WHEW!



Not so fast, try one out. Mine has about 1200 rds of wolf thru it, no jams. Pretty accurate too.
Link Posted: 9/24/2004 7:29:12 PM EST
Fortunately, none of them.

I did have one that had some teething problems at first, though. I bought a Smith and Wesson SW99 (walther p99 clone) in .40 S&W a couple of years ago, and it was problematic through the first couple hundred rounds. The problem was always failure to feed. FMJ rounds would just stop halfway up the feedramp. I finally took the Dremel tool and did a little polishing of the feedram and she works like a champ now.

Remember the Alamo, and God Bless Texas...
Link Posted: 9/24/2004 7:29:12 PM EST
Charles Daley Pump action 12ga Home Defense Shotgun


Biggest POS ever, I traded it for a new AR15 mag
Link Posted: 9/24/2004 7:29:14 PM EST
Raven .25 It was hard for me to remove the magazine. Really hard. Really really hard!
Link Posted: 9/24/2004 7:29:15 PM EST
Reliability-wise, one of my M1 Carbines...replaced the ejector and extractor and it fixed right up tho.

Function-wise...a Cobray CM-11. The carbine version of their M11/9 pistol. Stupid thing would double/triple-tap if I pulled the trigger slowly...scared the hell out of me, quite frankly, as I am not in a CIII state and couldn't pass it off no matter what I would care to try in front of the po-po.

Link Posted: 9/24/2004 7:29:20 PM EST
Remington 597 22LR, jamed ever 3 rounds and it was brand new.
Link Posted: 9/24/2004 7:29:38 PM EST
I had a Maverick pump shotgun several years ago.

Actually, that gun wasn't all that bad!
Link Posted: 9/24/2004 7:29:41 PM EST
I had a Lorcin .25 auto when I had an apartment in Winston-Salem but when I moved out I left it somewhere in the kitchen I think.
Link Posted: 9/24/2004 7:30:10 PM EST

Originally Posted By WI_Rifleman:
Remington 597 22LR, jamed ever 3 rounds and it was brand new.



same here
Link Posted: 9/24/2004 7:30:14 PM EST
A Universal Carbine. .30 Cal.

Should have been a single shot, which it was...more or less.

Jammaholic POS no matter what.

Danny
Link Posted: 9/24/2004 7:30:36 PM EST
For me an Oly XM-177 clone. It was actually a decent rifle, but it would pop off 2-3 rounds with one trigger pull every now and then, and I did not know enough about AR's yet to fix it......
Link Posted: 9/24/2004 7:30:48 PM EST
Easy. A .380 Lorcin w/a 37 inch barrel and a 200 rd preban mag.
Link Posted: 9/24/2004 7:30:59 PM EST
TEC-9
Link Posted: 9/24/2004 7:34:10 PM EST
Wilkinson Sherry .22 pistol. FTF and inaccurate. Funny though, my father was very accurate with it and it rarely jammed for him. Tiny piece to get your hands on. Planerench out.
Link Posted: 9/24/2004 7:49:27 PM EST
I didnt own it, but it was this .22LR pump action rifle that jammed after 1 round(holds 15) so you ended up having to reload one bullet every time and pumping it.

I wanted to die. I make fun of the owner every time I see him now.
Link Posted: 9/24/2004 7:51:11 PM EST
I have a Universal M-1 carbine. I love mine shoots great.
Link Posted: 9/24/2004 7:54:40 PM EST

Cetme made by Century...Extra large POS!
Link Posted: 9/24/2004 7:56:09 PM EST
Link Posted: 9/24/2004 7:56:11 PM EST
RG 22 revolver

Wouldnt fire more then 50% of the round, had problems getting spent rounds out of it too.
Link Posted: 9/24/2004 7:57:26 PM EST
Mossberg bolt action shotgun sawed off to 18.5. The sear pin was a little worn. It'd fire when the bolt closed. I traded it for a $50 gift certificate at a police "buy back".
Link Posted: 9/24/2004 7:57:44 PM EST
Link Posted: 9/24/2004 7:59:17 PM EST
Anything French. . .

Link Posted: 9/24/2004 8:00:04 PM EST
M3 Grease gun. Actually it belonged to Uncle Sam, but I really couldn't believe what a pos it was.

a .22 revolver (generic) That thing will cut a piece of paper in half from shaved lead. It is more dangerous from the side, then the muzzle.
Link Posted: 9/24/2004 8:06:57 PM EST

Originally Posted By Lumpy196:
AMT .45 Backup

www.kitsune.addr.com/Firearms/Auto-Pistols/AMT_45_Backup.jpg




Heh, doesn't suprise me....

Many years ago my father bought a .380 AMT backup....

What a piece of crap.. Not only was it just a piece of poorly made crap, the damn thing would fire if you pulled the trigger hard, with the safety ON

Hated that stupid thing, cheap bastard, sheesh.......
Link Posted: 9/24/2004 8:10:46 PM EST
Lorcin 9mm handgun.

70 rnds then jamomatic...
Link Posted: 9/24/2004 8:12:11 PM EST

Originally Posted By lippo:
Cetme made by Century...Extra large POS!


+1


and this shitty AR-15. Never had problems with guns until now.

unless you count the SKS with the "tac-trigger". I put the gun down and the thing fired off a whole clip. I hit the deck.
Link Posted: 9/24/2004 8:12:18 PM EST

Originally Posted By mpearcex:
I have a Universal M-1 carbine. I love mine shoots great.



Mine was prolly just a fluke, got it used.

It was accurate, just would not function. Tried different mags, cleaning, everything. Gas port was open.

Danny
Link Posted: 9/24/2004 8:13:24 PM EST
I've never owned a POS weapon. I try to research my purchases thouoghly enough so that wont happened. So far, so good.
Link Posted: 9/24/2004 8:13:28 PM EST
none

i try to get opinions before i invest my $$$ into a gun
Link Posted: 9/24/2004 8:23:37 PM EST
[Last Edit: 9/24/2004 8:24:50 PM EST by JHaines]
I was worried about picking up a CETME after reading several horror stories.
When I ended up ordering, I asked FAC to hand-pick a non-ground bolt, and decided
to go with a Stainless Steel receiver.

Several hundred rounds through it - no problems, flawless function, fun as hell to shoot.
Very impressed with it. I couldn't be happier.

Otherwise, no problems with any other firearms I've owned. Websites like this, and a
little research tend to keep the POS purchases away.
Link Posted: 9/24/2004 8:25:13 PM EST
Lorcin 9mm pistol!! About halfway into the 3rd mag the slide seperates in two large parts. One goes flying in the air. Could have been real bad.
Link Posted: 9/24/2004 8:29:43 PM EST
Charter Arms AR-7 .22 cal. rifle.

I don't think it ever shot a full mag without a jam and the shot spread was about 5 inches at 25 yards.
Link Posted: 9/24/2004 8:33:12 PM EST
1. Grendal .380. the trigger pin broke first time I shot it. Junk! Grendal fixed it, I sold it.

2. Had a Tec-9 that wouldn't feed. Did a partial trade for a Colt Sporter 9mm carbine back in the early 90's. I lost my ass on the trade but I guess I did good in the long run.

Scott

Link Posted: 9/24/2004 8:33:39 PM EST
all good so far
Link Posted: 9/24/2004 8:44:26 PM EST
Damn, can't believe there's 2 carbines in this thread. I've never had any trouble with mine except for a bad mag.

The Lorcins I can see.

I've got a .25 Taurus. When I did police work I used to carry it in my bag as a drop gun. I've got an break-open Iver Johnson .32 too, but it's old enough that I consider it a classic rather than a POS.
Link Posted: 9/24/2004 8:44:52 PM EST
AR-15 for me..followed by a Mannlicher Carcano...
Link Posted: 9/24/2004 8:50:50 PM EST
Thank god no one has admitted to owning a Jennings yet...
Link Posted: 9/24/2004 8:52:19 PM EST
Link Posted: 9/24/2004 8:55:42 PM EST
My Colt SP1 is probably not, but my biggest POS was a Davis P.380. Every other round was a jam......I gave it away to a friend for a computer, best trade ever!




Originally Posted By Tonster:
Tec-9 for me...couldn't shoot straight to save my life with that gun!!! The biggest/only POS I have ever had. On the plus side it did have an evil high capacity clip

Link Posted: 9/24/2004 8:57:46 PM EST
[Last Edit: 9/24/2004 8:58:22 PM EST by Bad_Aim]
"My wife wants a Raven, I keep bringing home Smith and Wesson revolvers instead."



if she wants a bad gun just crush some cans, duct tape them together, and strap a rubber band on the contraption. Tell her that is the equivalent of what she wants.


Dont forget to tell her that a different gun has more thrusts per squeeze anyways.
Link Posted: 9/24/2004 9:00:19 PM EST
Link Posted: 9/24/2004 9:00:57 PM EST
I've had good luck so far. My former step-father was a fan of the Lorcin series, which eventually saved both our lives. When I was twelve he got drunk and decided he was going to kill me with his Lorcin .380. He racked the slide, pointed it at my face and pulled the trigger. Evidently a magazine problem prevented it from feeding. When I was fourteen he got drunk and beat up my mother. I decided I was going to shoot him with his Lorcin 9mm(he had been threatening my mother with it, and lost it in the struggle). I picked it up off the floor and attempted to chamber a round. When I released the slide the round became lodged between the feed ramp and the slide. In my state I was unable to clear it. It did make a decent club however, which I used to pistol-whip him until the police arrived. He survived, but had some pretty serious nerve damage in his face and a broken jaw.

Lorcins save lives.
Link Posted: 9/24/2004 9:08:29 PM EST
Carbon-15 type 97
Link Posted: 9/24/2004 9:09:33 PM EST
About 15 years ago I got a Wyoming Arms .45ACP...Jammed every other round. Sent it to their shop in Thermopolis, Wyoming for repair. Still jammed. Traded it to a pawn shop. Went back into the pawn shop a week or so later only to be kicked out for trading a POS

Also had a POS:
CETME
Lorcin
Walther P-22 (Finicky with ammo)
Rossi .38 that was off time and shaved lead

And probably others, but I can't remember
Link Posted: 9/24/2004 9:09:39 PM EST
Galesi .25 ACP.

Actually quite reliable the few times I fired it – but just on principle I have no use for zinc frames (which I didn’t know it had when I bought it).
Arrow Left Previous Page
Page / 3
Top Top