![Bravo Company BCM](/images/2016/banners/sticky/BCM_StickyBarAd_225x40.gif)
![Login](/images/2016/spacer.gif)
Originally Posted By Missilegeek: As a guy with a G21 avatar pic... No relevant factory slide cut, no care. MOS is AIDS. Glock stock triggers are aids. Glock ergonomics were designed by Euro fags used to having dicks in their hands all day. Shield Arms had to teach them how to build a relevant magazine. The good Glocks are 87% modified. The best Glocks don't even use a Glock frame. Sig, Springfield, P80, Palmetto and Taurus figured out how to make a factory gun with a relevant factory slide cut, relevant mags, and better trigger than Glock. Also better ergos. It's 2023, unfuck yourselves Glock. View Quote |
|
|
Serious RDS question,
what's the most gay plate mounting option: Glock MOS, Or rear dovetail plate mount? |
|
|
Originally Posted By Missilegeek: Serious RDS question, what's the most gay plate mounting option: Glock MOS, Or rear dovetail plate mount? View Quote Glock. Fuck that MOS idiocy, mostly because their plates suck ass. Glock has been making factory RMR, ACRO, 509T, DPP, and Shield footprint slides since last year, but they refuse to sell them on the commercial market. “Agency order only” faggotry. You can get 30 different flavors of G19, but you can’t order a G19 or G17 with the right optic cut from the factory. I don’t even think they’re selling them to distributors, haven’t seen any advertisements for them. All I want is a factory G17 with an RMR cut without having to shell out an additional $200/6 weeks to have it milled/refinished. But that’s apparently too much to ask for. The dovetail is a retrofit, for pistols that you can’t or won’t have milled. It has its place, goofy as it is. |
|
|
Originally Posted By November5: The MOS cut on the 43X/48 is the same RMSc cut that all those other brands you mentioned use. View Quote View All Quotes View All Quotes Originally Posted By November5: Originally Posted By Missilegeek: As a guy with a G21 avatar pic... No relevant factory slide cut, no care. MOS is AIDS. Glock stock triggers are aids. Glock ergonomics were designed by Euro fags used to having dicks in their hands all day. Shield Arms had to teach them how to build a relevant magazine. The good Glocks are 87% modified. The best Glocks don't even use a Glock frame. Sig, Springfield, P80, Palmetto and Taurus figured out how to make a factory gun with a relevant factory slide cut, relevant mags, and better trigger than Glock. Also better ergos. It's 2023, unfuck yourselves Glock. I did not know that and am a bit pleasantly surprised. However, no removable rear pins? Still a gay and inferior design. Glock finds a way to fuck everything up. Glocks are awesome, when their patent expires, and some American makes a good one with better: Frame, slide, trigger and magazine for 60% of the price. |
|
|
Originally Posted By rb889: Glock. Fuck that MOS idiocy, mostly because their plates suck ass. Glock has been making factory RMR, ACRO, 509T, DPP, and Shield footprint slides since last year, but they refuse to sell them on the commercial market. “Agency order only” faggotry. You can get 30 different flavors of G19, but you can’t order a G19 or G17 with the right optic cut from the factory. I don’t even think they’re selling them to distributors, haven’t seen any advertisements for them. All I want is a factory G17 with an RMR cut without having to shell out an additional $200/6 weeks to have it milled/refinished. But that’s apparently too much to ask for. The dovetail is a retrofit, for pistols that you can’t or won’t have milled. It has its place, goofy as it is. View Quote View All Quotes View All Quotes Originally Posted By rb889: Originally Posted By Missilegeek: Serious RDS question, what's the most gay plate mounting option: Glock MOS, Or rear dovetail plate mount? Glock. Fuck that MOS idiocy, mostly because their plates suck ass. Glock has been making factory RMR, ACRO, 509T, DPP, and Shield footprint slides since last year, but they refuse to sell them on the commercial market. “Agency order only” faggotry. You can get 30 different flavors of G19, but you can’t order a G19 or G17 with the right optic cut from the factory. I don’t even think they’re selling them to distributors, haven’t seen any advertisements for them. All I want is a factory G17 with an RMR cut without having to shell out an additional $200/6 weeks to have it milled/refinished. But that’s apparently too much to ask for. The dovetail is a retrofit, for pistols that you can’t or won’t have milled. It has its place, goofy as it is. Monica. Just buy the Palmetto and put a better trigger in it. Or P80 and whatever parts you want. Glock frame is worst frame. |
|
|
Originally Posted By November5: I've seen a few Commanders with cracked frames. I've also cracked the frame on a Springfield ultra compact. Most people are never going to hit 20-30,000 rounds out of a single gun. View Quote View All Quotes View All Quotes Originally Posted By November5: Originally Posted By Pantexan: Originally Posted By November5: Aluminum 1911s in .45 at least are notorious for not lasting very long, low five digits generally. And that's with anodized aluminum. Source ?? I've seen Glock rails broken off with under 20k rounds as well |
|
"If you cant do something smart, do something right"
|
Originally Posted By Missilegeek: Serious RDS question, what's the most gay plate mounting option: Glock MOS, Or rear dovetail plate mount? View Quote Definitely the MOS. The dovetail plate is a good way for people to get a taste of RDS and making the best of what they have... The MOS is intentionally manufactured that way though... and I've never heard a good thing about it. |
|
"Byte My Shiny Metal Brass"
Benewah County resident |
Originally Posted By Missilegeek: As a guy with a G21 avatar pic... No relevant factory slide cut, no care. MOS is AIDS. Glock stock triggers are aids. Glock ergonomics were designed by Euro fags used to having dicks in their hands all day. Shield Arms had to teach them how to build a relevant magazine. The good Glocks are 87% modified. The best Glocks don't even use a Glock frame. Sig, Springfield, P80, Palmetto and Taurus figured out how to make a factory gun with a relevant factory slide cut, relevant mags, and better trigger than Glock. Also better ergos. It's 2023, unfuck yourselves Glock. View Quote View All Quotes View All Quotes Originally Posted By Missilegeek: Originally Posted By New2AR15s: Originally Posted By Missilegeek: Chynason is back from the warranty You may not like it, but this is what peak modern conceal carry looks like: https://www.ar15.com/media/mediaFiles/576591/image_67223297_JPG-2924631.jpg /media/mediaFiles/sharedAlbum/deOINby-52.gif https://www.ar15.com/media/mediaFiles/497583/20221108_214628-2595040.jpg As a guy with a G21 avatar pic... No relevant factory slide cut, no care. MOS is AIDS. Glock stock triggers are aids. Glock ergonomics were designed by Euro fags used to having dicks in their hands all day. Shield Arms had to teach them how to build a relevant magazine. The good Glocks are 87% modified. The best Glocks don't even use a Glock frame. Sig, Springfield, P80, Palmetto and Taurus figured out how to make a factory gun with a relevant factory slide cut, relevant mags, and better trigger than Glock. Also better ergos. It's 2023, unfuck yourselves Glock. Ill agree that there are issues with Glocks but to me they are minor. I tried to like a lot of other small CCW guns I also dont care much for MOS but my slide is milled and wears an RMR |
|
|
Originally Posted By Missilegeek: Serious RDS question, what's the most gay plate mounting option: Glock MOS, Or rear dovetail plate mount? View Quote The responses to this question were not what I expected. I started with a dovetail adapter and that was bad enough it almost put me off red dots. I'm not a Glock guy, so I had no idea the MOS was that bad. |
|
|
Originally Posted By BMSMB: Definitely the MOS. The dovetail plate is a good way for people to get a taste of RDS and making the best of what they have... The MOS is intentionally manufactured that way though... and I've never heard a good thing about it. View Quote View All Quotes View All Quotes Originally Posted By BMSMB: Originally Posted By Missilegeek: Serious RDS question, what's the most gay plate mounting option: Glock MOS, Or rear dovetail plate mount? Definitely the MOS. The dovetail plate is a good way for people to get a taste of RDS and making the best of what they have... The MOS is intentionally manufactured that way though... and I've never heard a good thing about it. Very good point. My first RDS gateway drug, was a rear dovetail. At the time I was very hesitant to even spend $42 for the plate. Now I'm happy to spend $200 for a slide cut, like a god damned junkie. |
|
|
Originally Posted By AK-12: The locking notch is also plastic instead of metal. View Quote At the price I usually get them for, Glock mags are practically disposable. If I wear one out every few years, it's still probably cheaper in the long run. For now, it's all just musing, since Stealth Arms hasn't figured out the RMR cut, yet. As for durability of an aluminum frame, I guess it is a little concerning. I won't be using hot ammo with it, but I've easily got 20K through my Glock 17 and 34. Most of my training is dry firing, these days, but I am still a little wary, since people keep bringing it up. |
|
|
Originally Posted By New2AR15s: /media/mediaFiles/sharedAlbum/deOINby-52.gif https://www.ar15.com/media/mediaFiles/497583/20221108_214628-2595040.jpg View Quote View All Quotes View All Quotes Originally Posted By New2AR15s: Originally Posted By Missilegeek: Chynason is back from the warranty You may not like it, but this is what peak modern conceal carry looks like: https://www.ar15.com/media/mediaFiles/576591/image_67223297_JPG-2924631.jpg /media/mediaFiles/sharedAlbum/deOINby-52.gif https://www.ar15.com/media/mediaFiles/497583/20221108_214628-2595040.jpg Jeebus, is that RMR-cc wearing platform shoes? |
|
|
Originally Posted By Missilegeek: Monica. Just buy the Palmetto and put a better trigger in it. Or P80 and whatever parts you want. Glock frame is worst frame. View Quote View All Quotes View All Quotes Originally Posted By Missilegeek: Originally Posted By rb889: Originally Posted By Missilegeek: Serious RDS question, what's the most gay plate mounting option: Glock MOS, Or rear dovetail plate mount? Glock. Fuck that MOS idiocy, mostly because their plates suck ass. Glock has been making factory RMR, ACRO, 509T, DPP, and Shield footprint slides since last year, but they refuse to sell them on the commercial market. “Agency order only” faggotry. You can get 30 different flavors of G19, but you can’t order a G19 or G17 with the right optic cut from the factory. I don’t even think they’re selling them to distributors, haven’t seen any advertisements for them. All I want is a factory G17 with an RMR cut without having to shell out an additional $200/6 weeks to have it milled/refinished. But that’s apparently too much to ask for. The dovetail is a retrofit, for pistols that you can’t or won’t have milled. It has its place, goofy as it is. Monica. Just buy the Palmetto and put a better trigger in it. Or P80 and whatever parts you want. Glock frame is worst frame. Of all the Glocks, Glock makes the worst Glock |
|
|
Originally Posted By Croak: Jeebus, is that RMR-cc wearing platform shoes? View Quote View All Quotes View All Quotes Originally Posted By Croak: Originally Posted By New2AR15s: Originally Posted By Missilegeek: Chynason is back from the warranty You may not like it, but this is what peak modern conceal carry looks like: https://www.ar15.com/media/mediaFiles/576591/image_67223297_JPG-2924631.jpg /media/mediaFiles/sharedAlbum/deOINby-52.gif https://www.ar15.com/media/mediaFiles/497583/20221108_214628-2595040.jpg Jeebus, is that RMR-cc wearing platform shoes? Not a CC just a regular RMR |
|
|
Originally Posted By Redbirdxx: The responses to this question were not what I expected. I started with a dovetail adapter and that was bad enough it almost put me off red dots. I'm not a Glock guy, so I had no idea the MOS was that bad. View Quote I competed for a year and a half, maybe 2, with dovetail adapters. Only failure was from me bumping it while getting in/out of a side by side a bunch of times. |
|
"Byte My Shiny Metal Brass"
Benewah County resident |
Originally Posted By CDPhD: At the price I usually get them for, Glock mags are practically disposable. If I wear one out every few years, it's still probably cheaper in the long run. For now, it's all just musing, since Stealth Arms hasn't figured out the RMR cut, yet. As for durability of an aluminum frame, I guess it is a little concerning. I won't be using hot ammo with it, but I've easily got 20K through my Glock 17 and 34. Most of my training is dry firing, these days, but I am still a little wary, since people keep bringing it up. View Quote Glock magazines aren't appreciably cheaper than a CZ-75, Beretta 92, or any other conventionally constructed pistol magazine. For whatever reason most of my favorite pistols tend to be aluminum framed. Durability hasn't been an issue. |
|
|
Looks like another SRO lost some glass...
https://www.instagram.com/reel/CwJBd2_JlCS/?igshid=MzRlODBiNWFlZA== |
|
"Byte My Shiny Metal Brass"
Benewah County resident |
Originally Posted By BMSMB: Looks like another SRO lost some glass... https://www.instagram.com/reel/CwJBd2_JlCS/?igshid=MzRlODBiNWFlZA== View Quote 20k rounds on it. Someone said trijicon replaced their buddies which failed similarly for free in a week. |
|
|
Originally Posted By UndrGrndPrdcts: 20k rounds on it. Someone said trijicon replaced their buddies which failed similarly for free in a week. View Quote It honestly doesn't make me think any less of the SRO... I'll keep posting them up as long as people keep posting the holosun clip though. |
|
"Byte My Shiny Metal Brass"
Benewah County resident |
Originally Posted By UndrGrndPrdcts: 20k rounds on it. Someone said trijicon replaced their buddies which failed similarly for free in a week. View Quote View All Quotes View All Quotes Originally Posted By UndrGrndPrdcts: Originally Posted By BMSMB: Looks like another SRO lost some glass... https://www.instagram.com/reel/CwJBd2_JlCS/?igshid=MzRlODBiNWFlZA== 20k rounds on it. Someone said trijicon replaced their buddies which failed similarly for free in a week. I have an SRO and a 507K... Ill let y'all know which one throws the lense first. ![]() |
|
|
My daughter just won Cola Warrior Women's division.
She used a red dot on her pistol. |
|
Pemberton the carbonated, behind his tasty bubbles, whispering of the love that is more horrible than hate.
|
|
Just found loose mounting screws, no idea how long they've been like that. Blue loctite and a fat wrench for torque has always been used, but I guess I need to check it more often.
I am ashame. ![]() |
|
|
|
|
|
Pemberton the carbonated, behind his tasty bubbles, whispering of the love that is more horrible than hate.
|
Originally Posted By CouncilOfDave: Just found loose mounting screws, no idea how long they've been like that. Blue loctite and a fat wrench for torque has always been used, but I guess I need to check it more often. I am ashame. ![]() View Quote Blue Loc-tite usually isn't enough (DO NOT use red) but you need something designed to withstand more vibration and shock. I think there's a higher strength green loc-tite Also a good idea to use alcohol on a Q-tip to clean out the threaded hole (and the threads on the screw) so there's no oils to prevent the thread locker from sealing. |
|
|
Long time lurker - finally made an account for this question.
Recently picked up an optic ready VP9. What’s a good tritium, suppressor height sights that can co-witness with the MPS? |
|
|
Originally Posted By Hircine: Long time lurker - finally made an account for this question. Recently picked up an optic ready VP9. What’s a good tritium, suppressor height sights that can co-witness with the MPS? View Quote The best BUIS are no iron sights. The MPS is reliable enough to be fine without them |
|
|
Originally Posted By Hircine: Long time lurker - finally made an account for this question. Recently picked up an optic ready VP9. What’s a good tritium, suppressor height sights that can co-witness with the MPS? View Quote You don't want tritium for back up sights. They are a distraction from the dot. Stick to blacked out sights for backup. |
|
|
Originally Posted By Rudukai13: Witness marks help with that View Quote Originally Posted By hrt4me: that's why you gotta index mark those screws View Quote Will do. Originally Posted By F22_RaptoR: Blue Loc-tite usually isn't enough (DO NOT use red) but you need something designed to withstand more vibration and shock. I think there's a higher strength green loc-tite Also a good idea to use alcohol on a Q-tip to clean out the threaded hole (and the threads on the screw) so there's no oils to prevent the thread locker from sealing. View Quote I may have shot an informal steel match a few weeks ago like this, I'm not totally sure. ![]() |
|
|
Originally Posted By CouncilOfDave: Will do. Will also do. I only have blue and red on hand, so I'll check into it and pick up something more appropriate, and handle all of it before the next match. I may have shot an informal steel match a few weeks ago like this, I'm not totally sure. ![]() View Quote View All Quotes View All Quotes Originally Posted By CouncilOfDave: Originally Posted By Rudukai13: Witness marks help with that Originally Posted By hrt4me: that's why you gotta index mark those screws Will do. Originally Posted By F22_RaptoR: Blue Loc-tite usually isn't enough (DO NOT use red) but you need something designed to withstand more vibration and shock. I think there's a higher strength green loc-tite Also a good idea to use alcohol on a Q-tip to clean out the threaded hole (and the threads on the screw) so there's no oils to prevent the thread locker from sealing. I may have shot an informal steel match a few weeks ago like this, I'm not totally sure. ![]() I do fine with 222 (purple) but I make it a point to clean the ever-living shit out of the screws and the slide threads, use proper torque, witness mark the screws, and inspect the optic mount just like the rest of the handgun on a regular basis. |
|
|
Originally Posted By Croak: I do fine with 222 (purple) but I make it a point to clean the ever-living shit out of the screws and the slide threads, use proper torque, witness mark the screws, and inspect the optic mount just like the rest of the handgun on a regular basis. View Quote View All Quotes View All Quotes Originally Posted By Croak: Originally Posted By CouncilOfDave: Originally Posted By Rudukai13: Witness marks help with that Originally Posted By hrt4me: that's why you gotta index mark those screws Will do. Originally Posted By F22_RaptoR: Blue Loc-tite usually isn't enough (DO NOT use red) but you need something designed to withstand more vibration and shock. I think there's a higher strength green loc-tite Also a good idea to use alcohol on a Q-tip to clean out the threaded hole (and the threads on the screw) so there's no oils to prevent the thread locker from sealing. I may have shot an informal steel match a few weeks ago like this, I'm not totally sure. ![]() I do fine with 222 (purple) but I make it a point to clean the ever-living shit out of the screws and the slide threads, use proper torque, witness mark the screws, and inspect the optic mount just like the rest of the handgun on a regular basis. |
|
|
Originally Posted By CouncilOfDave: I don't really wanna fuck with heat if I need to remove it later. It will probably be fine with blue if I just stop being lazy, they hadn't been checked all year. All my fault. View Quote |
|
|
Originally Posted By Hircine: Long time lurker - finally made an account for this question. Recently picked up an optic ready VP9. What’s a good tritium, suppressor height sights that can co-witness with the MPS? View Quote Blacked-out is what you want. Tritium is pointless if you have a red dot, let alone pointless without, but that's a different discussion. |
|
|
Originally Posted By BMSMB: I competed for a year and a half, maybe 2, with dovetail adapters. Only failure was from me bumping it while getting in/out of a side by side a bunch of times. View Quote My main issue with the dovetail mount was how tall it ended up being. I had enough reps with iron sights that the high mounted RMR required modifying my presentation slightly, something I was hesitant to drill a bunch when irons were still my go to at that time. Getting a slide cut brought the RMR low enough that my presentation was "close enough", though I did find (as many do) that it needed a little work. |
|
|
Originally Posted By Hircine: Long time lurker - finally made an account for this question. Recently picked up an optic ready VP9. What’s a good tritium, suppressor height sights that can co-witness with the MPS? View Quote I put tritium sights on the first pistol I had cut for an RMR. In retrospect it was totally pointless, as in 8 years and thousands of rounds, I've never used them. Then I got night vision and really regretted putting them on there. |
|
|
|
|
Originally Posted By sierra-def: If using Glock plates, gay. If using FCD plates, Elite status. View Quote View All Quotes View All Quotes Originally Posted By sierra-def: Originally Posted By Missilegeek: Serious RDS question, what's the most gay plate mounting option: Glock MOS, Or rear dovetail plate mount? If using Glock plates, gay. If using FCD plates, Elite status. Plates are always gay. They are super gay, if the slide is big enough to accommodate a direct mount. So a Glock MOS with a quality plate, is just a super gay setup, with a good plate. Adding extra parts and screws, because some Euro fags refuse to do and sell the right thing. GAY! |
|
|
Originally Posted By sierra-def: Sir, majority of slides are more narrow than the MRDS. That overhang is gay. https://cdn11.bigcommerce.com/s-zxvmkoqdpw/images/stencil/1280x1280/products/138/464/DSC_0723__38171.1634152536.jpg https://media.tenor.com/etN58E68nEIAAAAC/gay-limp.gif Now the FCD plates eliminate gay. https://www.boresightsolutions.com/wp-content/uploads/2022/02/0F384513-331F-44BB-9814-204846D5076B_1_105_c.jpeg https://live.staticflickr.com/65535/53138292063_9266e40e63_k.jpg See, a FCD plate keep the gay overhang away. ![]() View Quote ![]() Those are basically the same height as a rear dovetail mount. |
|
|
Originally Posted By Missilegeek: /media/mediaFiles/sharedAlbum/reportedKlingon-344.gif Those are basically the same height as a rear dovetail mount. View Quote Almost but not quite. Dovetail mount plates are gay. |
|
|
Nice reminder...
Go dryfire today! |
|
"Byte My Shiny Metal Brass"
Benewah County resident |
|
Any of you guys with optics on your glocks have extra/takeoff stock Glock night sights? I’m looking for some for my g19.
|
|
|
|
Originally Posted By BaconFat: Woah, a thousand rounds....safe some ammo for the rest of us Where's your WML. You need that to maximize your insta-cred View Quote ![]() |
|
A true Texan would never leave his friends behind!
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.