Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 4/13/2006 8:18:29 PM EST
Link Posted: 4/13/2006 9:36:04 PM EST
Mossberg is 5-40.
Link Posted: 4/14/2006 3:42:40 AM EST
[Last Edit: 4/14/2006 3:43:40 AM EST by Valkyrie]
Thanx!

When installing this, how do I time it to line up correctly? And should I use blue Loctite?
Link Posted: 4/14/2006 3:52:45 AM EST
[Last Edit: 4/14/2006 3:55:10 AM EST by U_Down_Wit_OPP]
The threads should already be regulated to position the sight correctly, but Mossberg is notorious for having some pretty "abstract" tollerences. Be prepared to coerce it with pressure (but not too much lest you crack the tritium vial) or conversely, be prepared to use blue loctite should the hole be too broad.

Assuming the threads are right, i'd use red loctite. There should be enough grip on the threads themselves to keep it on snug, red loctite would be an extra measure while still being a tad more forgiving should you ever have to replace it.
Link Posted: 4/14/2006 4:43:16 AM EST
Thanx!
Link Posted: 4/14/2006 5:34:13 AM EST
Too much pressure might also strip or shear the threaded post. Proceed with caution! A drop of blue loc tite is a good idea.
Top Top