Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/8/2006 12:41:44 PM EST
I'm currently constructing a biquad antenna (2.4 GHz, not very large) that will be mounted outside. I'd like the antenna to be mounted in an enclosure, but I'm concerned about signal degredation.

I've seen alot of enclosures that house other types of wifi antennas, (dipole, yagi, etc) and they seem to be constructed of ABS plastic. So: Is an ABS enclosure RF transparent? If not, what is?

Thanks ARFCOM!
Link Posted: 2/8/2006 12:48:36 PM EST
While we're at it, would PVC be suitable?
Link Posted: 2/8/2006 12:52:11 PM EST
My company makes 1900-2400MHz antenna radomes out of both ABS and fiberglass.

You're safe.
Link Posted: 2/8/2006 12:52:44 PM EST
PVC may not be UV-stabilized.
Link Posted: 2/8/2006 12:53:21 PM EST
Yep, either ABS or PVC will work just fine.
Link Posted: 2/8/2006 12:53:29 PM EST
[Last Edit: 2/8/2006 12:54:14 PM EST by Miracle_Pants]
ABS will work just fine.

edit: I'm too slow.
Link Posted: 2/8/2006 12:54:34 PM EST
You should be fine if the ABS or PVC is filled with non-metallic, non-conductive fillers. Most plastics are filled with pigments, minerals and other bulk items, some of which might attenuate RF signals. Now carbon fiber is another story.
Top Top