Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 8/21/2004 4:00:44 PM EST
1977 Lincoln town car , gold.

while backing out, the car scraped against a concrete column and dented and scraped the driver side panel and a bit of the door panel.

It's pretty big, about 18 inches by 12 inches long, but not too deep.

How much you think that will run to fix it? What are options?
Link Posted: 8/21/2004 4:01:27 PM EST
'77 lincoln, why bother?
Link Posted: 8/21/2004 4:05:40 PM EST
[Last Edit: 8/21/2004 4:07:51 PM EST by DK-Prof]

Originally Posted By cduarte:
'77 lincoln, why bother?




BUUUUUUUUUUURN !!

If you don't care too much, just sand it, bondo/putty and use a spraycan and don't look too close. If this car is your baby, then local Maaco's can apparently be pretty good without being too expensive (since they are franchises, the quality can vary a lot - so check them out first).
Link Posted: 8/21/2004 4:07:50 PM EST
Bondo baby...BONDO!
Link Posted: 8/21/2004 4:15:26 PM EST
There is a salvage company (junkyard) in Putnam, CT on Route 44 that specializes in Lincoln Continental. They have hundreds of them. You might be able to get the parts you need. I think the name is Baker or Barker or something like that.
Link Posted: 8/21/2004 4:29:38 PM EST
Form what you described, maybe around $750.00. They may have to paint the whole side to make it match, considering its gold, which can be a bitch to match.
Top Top