Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
10/20/2017 1:01:18 AM
9/22/2017 12:11:25 AM
Posted: 9/9/2005 8:38:21 AM EDT
I just got a cheap 24/47 and am thinking about buying those new beechwood K98 handgaurds and stocks I've seen around, and doing up the yugo like a K98. I'm only wondering, and perhaps some here know;
1: Can you put the original style K98 rear sight on a yugo 24/47 sight base?
2: If I buy the stock and all the mounting hardware it should be a drop in conversion correct??, or is there any difference in barrel profiles or does the reciever ring have a handgaurd lip that would preclude me from doing this???

Thanks for any input guys

Ian
Link Posted: 9/9/2005 3:37:00 PM EDT
since no one's responded yet I can say something that I remember reading on here.

the actions of the 24/47 and M48 along with a few others are smaller I think than the K98. So it might not work. But try it and if it doesn't, find a RC K98 and put it on that
Link Posted: 9/9/2005 5:31:57 PM EDT
I don't think that the handgurads would work because I believe that the k98 had a longer barrel.
Link Posted: 9/9/2005 5:58:49 PM EDT
your yugo recevier is about 1/4" shorter than the K98. so, the triggerguard/ receiver bolts won't line up making the stock a no-go. most of the different countries of 98s that i have measured had the same basic barrel contour, but had slightly differing dimensions for those dimensions. in short (sorry to say)it won't work as you are thinking.
Link Posted: 9/11/2005 11:10:44 AM EDT
Are you guys sure?? All due respect but I am almost betting sure (and I don't normally bet) that the 24/47 is a standard length M98 action. It's the 48 series that is the short action which is approx. 1/4" shorter than the others.
Link Posted: 9/11/2005 11:40:41 AM EDT
I think it was the 24 that had the standard action.

To me there is nothing standard about 98 actions. I have three Turk 38's and they do not have interchangeable stocks.

Proceed cautiously.

Dennis Jenkins


Originally Posted By RABID:
Are you guys sure?? All due respect but I am almost betting sure (and I don't normally bet) that the 24/47 is a standard length M98 action. It's the 48 series that is the short action which is approx. 1/4" shorter than the others.

Link Posted: 9/11/2005 11:43:26 AM EDT
The 24/47 is a large ring, intermediate length action.
The Czech VZ24 is a full length 98k Mauser receiver with a carbine length barrel.
Jim
Link Posted: 9/11/2005 4:42:10 PM EDT
[Last Edit: 9/11/2005 4:48:31 PM EDT by advntrjnky]
the yugo m24/52c is the large ring full length 98. it was made from czech VZ24 rifles. they will show signs of scrubbing and yugo-iz-ing. the m24/47 is an intermediate action(approx 1/4" shorter).

#1 question: most large ring 98 sights will interchange "EXCEPT" the k98. the K98 is a longer/ different dimensions. i have swapped Spanish m43, vz24, yugo m48, and turk m38(K.Kale only) rear sights successfully between each other.
Top Top