Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/2/2006 5:16:48 PM EST
[Last Edit: 2/2/2006 6:24:13 PM EST by Jason_R]
I am thinking about purchasing this shotgun: www.gunsamerica.com/guns/976678952.htm but I don't like the finish. I like the standard police flat black finish, and the wilson combat finish.

Does anyone know how much it costs to refinish it? I was also going to get a vent rib barrel for it (well 2, one cut down and one full size for clays)

Also, it the ad says it's a police gun, and it looks like it says police on the receiver. Can anyone confirm?
Link Posted: 2/2/2006 7:50:25 PM EST
That IS the standard Remington Police gun finish.
Remington replaced the old oxide satin black finish many years ago with military-grade parkerizing.

Remington Police guns have a dark gray parkerized finish because Remington says it's is 60% more durable than bluing.

Currently, Remington only lists ONE 870P Police gun with the old satin black finish, and that's a plain-jane standard magazine, wood stock gun.

From the picture that's a Police gun, but I can't make out the receiver stamps.
The seller SAYS it's a Police gun, so I'd assume it is.
Link Posted: 2/3/2006 9:05:53 AM EST
Do you know a good place to get an 870 refinished.
Link Posted: 2/3/2006 3:20:44 PM EST
Link Posted: 2/4/2006 10:32:47 AM EST
Ikor, do you have pictures of the flat black one?

Link Posted: 2/5/2006 12:08:02 AM EST
Link Posted: 2/5/2006 5:50:32 AM EST
Texas Armament Co. 905 Pecan Street. Brownwood, TX 76801. Phone: (915) 646-5827

They park'd an 870HD for me, along with an SGT mag tube extension (so as to match afterwards). They're good people; super fast return shipping, the finish was flawless, and all roll-marks were still sharp and crisp in appearance.
IIRC, it was $80 (which included return shipping).

Link Posted: 2/5/2006 7:55:49 AM EST
Cool thanks. Do you happen to have any pics?
Link Posted: 2/5/2006 6:21:41 PM EST
It's Parkerized. That's one of the best finishes you can get. It's what the military uses. If you really must have a different finish, I would not refinish, rather I'd have one of the teflon coatings available on the market applied directly over the Parkerizing. The Parkerizing provides an outstanding porous base for the teflon finish to adhere to. I'd sent it to Walter Birdsong to have the Black T applied over the existing Parkerizing.
Top Top