Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 11/6/2001 4:13:03 PM EST
As some of you may remember I wrote a few weeks ago about the trouble I was having with an upper receiver that I bought from Model 1 Sales. The rounds were getting stuck on the feed ramps. Well I sent it back to them and they said they polished the ramps and tried the upper on Colt, Bushmaster, and Rock River lower and it worked perfectly. however when I got it back today and tried it, the rounds STILL get stuck, but only on the left side. I thought I saw a post a while back that was exactly the same thing. Can anyone point out the post and/or help me with this problem? I am at my wits end. is there ANYTHING I can do or should I send it back again and ask for a refund???
Link Posted: 11/6/2001 4:16:55 PM EST
Link Posted: 11/6/2001 4:28:52 PM EST

Originally Posted By CockedandLocked:
If its only having probs with the rounds comming off the left side, check for burrs or lip prob on the mags, I had a couple do me that way. After stonning them a little they worked fine

hope it helps

Do you think this will help? I have tried Sanchez, Center Industries, Colt, and Bushmaster. They all do the same thing.
Link Posted: 11/6/2001 4:38:37 PM EST
Link Posted: 11/6/2001 4:38:57 PM EST
Use the search feature.
Link Posted: 11/6/2001 6:38:53 PM EST
Really check the left feed ramp. Since the right one works maybe they didn't do a very good job on the left feed ramp. Use a fine round file first then rubbing compound on a q-tip. Can make the ramp smoother than monkey s#!t. Just look at it real closely with a flashlight and operate the action real slow and see if you can pick up the problem.
Top Top