Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/17/2005 11:01:50 AM EST
Well, Watcha think?
Rem 700 SPS(.308)
stock barrel, cut to 18"
NECG banded front sight(.276 partridge insert)
Holland brake(9/16" x28)
XS rear base w/ghost ring
Leupold qrw high's
Leupold 1.5-5 PR
Shoots like a .223 if that. It's my version of a Scout, I may do one with a Badger detachable mag system. I may down the road do one with a forward mount a clip slot it to take M14 clips.
Link Posted: 12/17/2005 11:37:32 AM EST
neat idea. i fondled a .308 sps today and liked it alot.
Link Posted: 12/17/2005 12:19:13 PM EST
nice. why not go with a forward mounted scope? how did you cut and crown the barrel?
Link Posted: 12/17/2005 5:49:35 PM EST
I didn't do the forward "scout" mount because the only one commercially available was the B square one. wasn't to sure about it. So, I'll have one custom made for another project. I'm not so convinced that they are all that much faster anyhow.

I had a Gunsmith do the work, he has a lathe, so, it's a snap for him to do.

I really think commercial manufactures are missing the boat on alot of things that could be more practicle.

Link Posted: 12/17/2005 7:18:53 PM EST
Nice... I prefer the rear mount scope to the forward mount. With a foward mount I get glare on the glass if the sun is behind me.
Link Posted: 12/17/2005 7:50:13 PM EST
I don't really care for the muzzle break, but other than that, I think it rocks! nice job!
Link Posted: 12/18/2005 3:47:34 AM EST
I know the brake may look like to much, but it works! It has a solid bottom, so no dust print-if I end up proned out.

Link Posted: 12/18/2005 7:29:18 AM EST
Link Posted: 12/18/2005 9:28:27 AM EST
I know what a scout is by "coopers" definition--I'm not a zombie and worship that.

Like I said, "my version" I knew if it wasn't a purest, it would be scorned.
Link Posted: 12/18/2005 9:57:44 AM EST
Looked good till I got to the brake. I don't care for muzzle brakes at all. Looks good though. I wonder if that is the same threads as a.308 A2 FH?
Link Posted: 12/18/2005 10:10:57 AM EST
I think a 5/8" is used on the domestic made ones. I did the brake for the recoil, I know "it's only a .308" It's also less than 7 pounds and I wanted it to be enjoyable to shoot.

Link Posted: 12/18/2005 11:09:51 AM EST
Link Posted: 12/18/2005 11:53:29 AM EST
Raf, no worries, I do intend to have a forward mount made later and put together one as described. I do agree with the merits of a clip loaded rifle. I think that was tested with the Enfields long ago. I didn't care for the Bsquare mount, doesn't look sturdy enough. I would rather have one made.

Link Posted: 12/18/2005 6:32:46 PM EST
Look into a Burris scout rail and scope. I'd trust them way more than that B-square crap. Burris has info on their website about it. Anyways, love the rifle so far.
Link Posted: 12/18/2005 6:53:20 PM EST
Nice Rifle!I have a bolt action remington I have been thinking about lately. Does anyone know if I can have the .270 rebarreled to .308??? Hate to hijack thread
Link Posted: 12/20/2005 8:49:26 AM EST
[Last Edit: 12/20/2005 8:50:53 AM EST by Adirondack1]
I have a M700 CDL in 30-06 sitting in the Custom Shop at Remington as we speak, does anyone have a picture of the B-Square scout mount? I'd like to see how it attaches, or at least have someone bring me up to date on how it attaches. If it uses the forawd scope holes of the reciever or the rear sight mounting holes on the barrel itself.
What I am doing with my CDL is having the barrel cut down to 17", applying a 2" Remington muzzle break , pillar bedding the stock and trigger job at 3 1/2 to 4 lbs.

The beauty is... I get it all done at half price as an employee....my little Christmas Present to ME!

PS MArk, I may have built you gun originally! LOL!
Link Posted: 12/20/2005 10:55:02 AM EST
The Bsquare does use the front scope holes and the holes from the factory rear iron sights, if it had them to begin with. My experience with them is the mount used on the Savage Scout, ymmv as to the confidence with the product.
I doubt we're the first with the idea!

Link Posted: 12/21/2005 9:50:43 AM EST
I am preparing to do one myself using a 700 ADL. It will feature.....

Cut and reshaped Ramline stock
B square scout mount
Relocated front sight
Williams rear sight
18 inch barrel
Red dot sight
Stock, scope and action finished in Coyote brown and khaki.

I have all my parts together, I am just waiting for the barrelled action.

Thank you for sharing your project with us.
Link Posted: 12/21/2005 1:18:58 PM EST
My experience with the Williams sights was with the Savage Scout, it always shot loose, I wasn't thrilled with it. Me personally, would go with the XS sight. They do sell one that is just the rear ghost ring.

Link Posted: 12/21/2005 1:37:39 PM EST
I've got two scount setups (optics forward of the receiver), one is a Marlin lever action and one is a pump 22 mag. I'm a huge fan of the scout optics and the advantages it provides, but not of the "hard nosed" definition.
Mark, I've got to give my .02 worth....your rifle needs to have EER optics mounted forward of the receiver to be a scout. As it now sits, its just a nice rifle!

Top Top