Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/12/2006 1:44:41 PM EST
[Last Edit: 3/12/2006 1:45:14 PM EST by emptyhead]
Just took my first build out for a test run with serveral types of ammo and had 1 in 3 fail to fire with some federal xm193. All the american eagle 55 grain stuff and the winchester white box fired fine. I had primer dents on the xm193 and 1 or 2 fired the second time but the rest would not go off. The wolf also shot fine when it wouldn't fail to feed. Is it a problem with hard primers on the federal or do I have a weak hammer spring.
Link Posted: 3/12/2006 1:53:05 PM EST
For a first build project, verify the hammer spring is installed correctly (not backwards, legs on top of trigger pin).
Link Posted: 3/12/2006 1:59:58 PM EST
[Last Edit: 3/12/2006 2:00:13 PM EST by emptyhead]
Hammer spring is sitting on top of trigger pin.
Link Posted: 3/12/2006 2:28:30 PM EST
Is this a stock tirgger or is it a match type?
Link Posted: 3/12/2006 3:00:57 PM EST
stock trigger set
Link Posted: 3/12/2006 4:44:26 PM EST
[Last Edit: 3/12/2006 4:45:52 PM EST by Dano523]
Link Posted: 3/13/2006 2:41:13 AM EST
[Last Edit: 3/13/2006 2:42:06 AM EST by metroplex]

Originally Posted By emptyhead:
Hammer spring is sitting on top of trigger pin.



Is the spring on backwards? That "loop" should be on the back of the hammer (facing the shooter). When cocking the hammer, the hammer spring should be "compressing" in the direction of the windings.

A backwards hammer spring may have the loop in the front or back, but with the coil spring stretching out as you cock the hammer.
Link Posted: 3/13/2006 12:00:00 PM EST
Figured it out . I'm dense. thanks guys
Link Posted: 3/13/2006 3:19:39 PM EST

Originally Posted By emptyhead:
Figured it out . I'm dense. thanks guys



Was the hammer spring on backwards? You can tell us - it'd also help out anyone in the future who may stumble upon your thread experiencing the same problem.
Link Posted: 3/14/2006 1:01:57 AM EST
Hammer spring was flipped around.
Link Posted: 3/14/2006 1:45:16 AM EST

Originally Posted By emptyhead:
Hammer spring was flipped around.



I'm glad you found the problem!
Top Top