Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/28/2003 8:06:00 AM EST
will the arms #19s rasie an acog higher than the trijicon ta51?

i was thinking about switching to the throw lever mount but don't want to change the height.
Link Posted: 10/28/2003 8:40:53 AM EST
Actually, the 19s is a little higher than the TA51. Ray
Link Posted: 10/28/2003 9:37:17 AM EST
The #19S is a tad bit higher than the TA51 to allow clearance of the ARMS #40.
Link Posted: 10/28/2003 12:56:41 PM EST
thanks guys. a bit higher would help ghosting from the front sight.
Link Posted: 10/28/2003 3:16:27 PM EST
[Last Edit: 10/28/2003 7:08:56 PM EST by spider]
I've noticed under normal shooting (utilizing a good sight picture,) I don't notice the front sight at all. YMMV, though. Just my .02 Edited to concur w/ Duffy below, you will NOT miss the (IMHO, antiquated) thumbscrews. Throw levers rule.
Link Posted: 10/28/2003 4:15:44 PM EST
You won't notice the difference. Don't worry.
Link Posted: 10/28/2003 5:43:41 PM EST
The little height it raises the ACOG isn't noticeable in terms of ghosting of the front sight, it will make a telling difference if you want to mount an ARMS #40 behind it, as Bart stated. KAC 300M won't care either way, but with the TA51+ARMS 40 combo the bottom of the scope is almost touching the top of the BUIS. I got 19S for all of my ACOGs, can't deal with the thumb screws anymore.
Top Top