Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Site Notices
Posted: 5/31/2008 8:09:40 AM EDT
Anyone have one.  Good or Bad?  Thinking of getting one from Del-ton for $120 or $80 add-on for a rifle kit.

Update:  Sorry for a double post didn't see "RRA 2 stage trigger don't make same mistake I did".  But that still didn't answer my question just added more questions.  Such as what does the size matter?  I am guessing it does with the pre-drill hole in the lower reciever where the trigger pin would go.  I guess .154 is the normal and .156 is not.  
Link Posted: 6/4/2008 10:59:26 PM EDT

Quoted:
Anyone have one.  Good or Bad?  Thinking of getting one from Del-ton for $120 or $80 add-on for a rifle kit.

Update:  Sorry for a double post didn't see "RRA 2 stage trigger don't make same mistake I did".  But that still didn't answer my question just added more questions.  Such as what does the size matter?  I am guessing it does with the pre-drill hole in the lower reciever where the trigger pin would go.  I guess .154 is the normal and .156 is not.  


You did not read where the 0.156" is std. with RRA triggers (they are more like 0.1555").

If you do not like using some grease to tap them into place, you can always use the std. issue 0.154" pins.

Large pins are for the newer COLT's (either 0.170" or 0.1713").
Link Posted: 6/5/2008 7:07:10 AM EDT
I got the $80 add on for my Del-ton kit and it went together just fine on a Doublestar lower.  The pins tapped right in with some grease added and a firm fit that feels like they will stay in place.

Kirk
Top Top