Anyone have one.  Good or Bad?  Thinking of getting one from Del-ton for $120 or $80 add-on for a rifle kit.

Update:  Sorry for a double post didn't see "RRA 2 stage trigger don't make same mistake I did".  But that still didn't answer my question just added more questions.  Such as what does the size matter?  I am guessing it does with the pre-drill hole in the lower reciever where the trigger pin would go.  I guess .154 is the normal and .156 is not.  

Quoted: Anyone have one.  Good or Bad?  Thinking of getting one from Del-ton for $120 or $80 add-on for a rifle kit. Update:  Sorry for a double post didn't see "RRA 2 stage trigger don't make same mistake I did".  But that still didn't answer my question just added more questions.  Such as what does the size matter?  I am guessing it does with the pre-drill hole in the lower reciever where the trigger pin would go.  I guess .154 is the normal and .156 is not.

You did not read where the 0.156" is std. with RRA triggers (they are more like 0.1555").

If you do not like using some grease to tap them into place, you can always use the std. issue 0.154" pins.

Large pins are for the newer COLT's (either 0.170" or 0.1713").

I got the $80 add on for my Del-ton kit and it went together just fine on a Doublestar lower.  The pins tapped right in with some grease added and a firm fit that feels like they will stay in place.

Kirk