Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 9/21/2005 1:54:44 PM EDT
[Last Edit: 9/21/2005 1:55:40 PM EDT by armonic]
What's the best way to remove a jammed casing from the chamber. I had a FTE and the casing is jammed in there.
Should I just ram it out with a cleaning rod insterted through the barrel?
Link Posted: 9/21/2005 2:00:19 PM EDT
you can buy a little tool that does it i believe.
Link Posted: 9/21/2005 2:07:04 PM EDT
i believe that's the only way to do it. Same thing happened with my 20"er when I was shooting silver bear. The extractor ripped right through the rim. Tap it out, it might take some effort. If you in fact have a broken shell caught in there, then the broken shell extractor is your only hope i think...
Link Posted: 9/21/2005 2:07:38 PM EDT
I always use my old cleaning rod and it always works for me. It amazes me how much force it takes sometimes to get the damn thing out.
Link Posted: 9/21/2005 3:01:07 PM EDT
If the base is still on the case of the round, just tap it out with the cleaning rod. Chances are, it will pop right out.

WIZZO
Link Posted: 9/21/2005 3:04:26 PM EDT

Originally Posted By armonic:
What's the best way to remove a jammed casing from the chamber. I had a FTE and the casing is jammed in there.
Should I just ram it out with a cleaning rod insterted through the barrel?



Yes...
Link Posted: 9/21/2005 3:58:12 PM EDT

Originally Posted By theshootersden:

Originally Posted By armonic:
What's the best way to remove a jammed casing from the chamber. I had a FTE and the casing is jammed in there.
Should I just ram it out with a cleaning rod insterted through the barrel?



Yes...




Agreed.
Link Posted: 9/21/2005 4:08:13 PM EDT
we are assuming the ass of the case is ripped off right?and the usual hammering the stock on the ground doesnt work?
Link Posted: 9/21/2005 4:10:59 PM EDT
[Last Edit: 9/21/2005 4:11:51 PM EDT by theshootersden]

Originally Posted By mrrick:
we are assuming the ass of the case is ripped off right?and the usual hammering the stock on the ground doesnt work?



I'm assuming the rim is intact... I think if it had pulled off he would have mentioned it?
Link Posted: 9/21/2005 4:14:17 PM EDT
hey im an idiot,I leave out details all the time.one person says theres a tool for that ,to me implies broken shell xtractor,another says ram it out,if the case was intact what good would a shell xtractor do?internet advice=free
Link Posted: 9/21/2005 4:19:50 PM EDT
LOL... You know what? He might just reply saying that the rim is torn off? Then who's the idiot?
Link Posted: 9/21/2005 5:51:24 PM EDT
That rifle is defective and un-salvageable...send it to me for disposal.
Link Posted: 9/21/2005 6:30:14 PM EDT
I'll take the barrel
Link Posted: 9/22/2005 8:41:58 AM EDT
Yea, took some force with pounding on the cleaning rod, but it finally popped out. I think we have a case of defective 62gr Wolf ammo. Same thing happened to my buddy too (same case of ammo) completely different rifle.
Thanks
Top Top