Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 8/26/2004 2:02:54 PM EST
Has anyone had any problems with PRI 6.8 Magazines? Every once in a while the round will not feed up into the chamber, has anyone had this problem? Who else is selling 6.8 magazines?
Link Posted: 8/26/2004 2:49:54 PM EST
One of my PRI 6.8 magazines the first time I emptied the magazine it would not lock the bolt and carrier back. But that was a one time occurrence and hasn't repeated itself.

Since that one incident, all my PRI 6.8 magazines have run smoothly in my 6.8 Rem SPC AR-15.

Link Posted: 8/26/2004 3:07:12 PM EST
Is it only on one side of the mag? Are the rounds hitting that vertical section just bellow the feed ramps? I had a similar problem with one of my mags. see my original string <HERE>
Link Posted: 8/27/2004 5:12:49 AM EST
PRI mags are crap. No two are the same and I've seen many. They are not reliable enough for civilian usage let alone military.
HFG
Link Posted: 8/27/2004 7:18:02 AM EST

Originally Posted By HipFiredGun:
PRI mags are crap. No two are the same and I've seen many. They are not reliable enough for civilian usage let alone military.
HFG



Link Posted: 8/27/2004 7:24:30 AM EST

Originally Posted By HipFiredGun:
PRI mags are crap. No two are the same and I've seen many. They are not reliable enough for civilian usage let alone military.
HFG



for as much as they charge, that would be a damn shame if they were....
Link Posted: 8/27/2004 7:31:59 AM EST
They are.......

We rejected 70%!
HFG
Link Posted: 8/27/2004 7:33:04 AM EST

Originally Posted By HipFiredGun:
They are.......

We rejected 70%!
HFG



Damn...not looking very good on the 6.8mm scene then.
Link Posted: 8/27/2004 8:01:10 AM EST
My boss got three mags from PRI, each mag varied in width.
Link Posted: 8/27/2004 8:38:40 AM EST
Does anyone know of anyone else who is selling 6.8 magazines? Or is PRI the only company that is supplying them?
Link Posted: 8/27/2004 8:55:25 AM EST
wheres zak smith? shesh
Link Posted: 8/30/2004 4:05:31 AM EST
[Last Edit: 8/30/2004 4:56:56 AM EST by MSTN]
Top Top