Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 9/2/2010 8:15:57 AM EST
[Last Edit: 9/2/2010 8:17:32 AM EST by jimdvan]
My final retro parts came back from U.S. Anodizing yesterday. Both are built on NDS lowers. The top one is an XM16E1 with three prong FH and solid butt plate. 1970's Colt thin barrel and Colt upper receiver. The lower is my XM177E2 using a Double Star LW barrel that I cut and threaded on my lathe. Overall barrel length is 16.5". It is pinned and welded. The front sling swivel is held on by a roll pin. I also made an attempt at my own C MP C markings. The stock is an old Bushmaster aluminum stock that I had powder coated. The upper is a PM forge code but I removed that prior to refinishing. I also removed the flashing on the front sight tower.





Link Posted: 9/2/2010 8:21:23 AM EST
[Last Edit: 9/2/2010 8:22:36 AM EST by m1sniper]
Excellent job!! The C MP C mark looks real good!
Do you know the maker of the stamp set,font size and style? I've been looking for a set.
Link Posted: 9/2/2010 8:36:01 AM EST
Originally Posted By m1sniper:
Excellent job!! The C MP C mark looks real good!
Do you know the maker of the stamp set,font size and style? I've been looking for a set.


Thanks. The stamps are 3/32" and made by Gruv-Grip. Manufacturer number 698690. This is an old set so I don't know if the same set is still available.
Link Posted: 9/2/2010 9:31:34 AM EST
Sexy as HELL! God I gotta get my 177e2 done

I really like how your powder coat turned out. I was planning about a million coats of semi gloss to see if i could get that affect, but yours looks a way better idea!

Brick
Link Posted: 9/2/2010 9:48:21 AM EST
Yes! Really very nice. I have been contemplating an XM177 build for some time now. Maybe after I finish up the XM16.
Excellent, thanks for sharing
Ralph
Link Posted: 9/2/2010 9:58:59 AM EST


You done really fine job on those.
Link Posted: 9/2/2010 10:15:03 AM EST
Those are impressive!!!! Well done!
Link Posted: 9/2/2010 10:35:44 AM EST
[Last Edit: 9/2/2010 10:36:35 AM EST by hk45shooter]
Very nice, good job on the machine work & custom stamping too!

Now I'm gonna go fondle my XM16E1 & Xm177E2.
Link Posted: 9/2/2010 11:07:21 AM EST
[Last Edit: 9/2/2010 11:09:06 AM EST by plinkr415]
They both look excellent! The 603 made me pause for a second.

ETA: How did you get the sear pin on the 603 to look so real, and what internals (BCG, LPK, buffer) did you use for it?
Link Posted: 9/2/2010 11:37:22 AM EST
Originally Posted By plinkr415:
They both look excellent! The 603 made me pause for a second.

ETA: How did you get the sear pin on the 603 to look so real, and what internals (BCG, LPK, buffer) did you use for it?


I had not noticed that! Yes! Yes! How did you do that sear pin?
regards,
Raplh
Link Posted: 9/2/2010 12:54:32 PM EST
[Last Edit: 9/2/2010 12:55:33 PM EST by Der_Hans]
Nice work with those barrel markings!

ETA:

Originally Posted By F14ADC:
Originally Posted By plinkr415:
They both look excellent! The 603 made me pause for a second.

ETA: How did you get the sear pin on the 603 to look so real, and what internals (BCG, LPK, buffer) did you use for it?


I had not noticed that! Yes! Yes! How did you do that sear pin?
regards,
Raplh



+1
Link Posted: 9/2/2010 1:52:24 PM EST
Excellent.....
Link Posted: 9/2/2010 1:54:04 PM EST
Originally Posted By Der_Hans:
Nice work with those barrel markings!

ETA:

Originally Posted By F14ADC:
Originally Posted By plinkr415:
They both look excellent! The 603 made me pause for a second.

ETA: How did you get the sear pin on the 603 to look so real, and what internals (BCG, LPK, buffer) did you use for it?


I had not noticed that! Yes! Yes! How did you do that sear pin?
regards,
Raplh



+1


The LPK is all USGI surplus, the BCG is all Colt and I think the buffer is Bushmaster. As for the sear pin, I cut about .040" off each end of a sear pin on my lathe. Then I scratched a small divit in the sear pin location and epoxied the ends of the pins in place.
Link Posted: 9/2/2010 1:57:29 PM EST
Top notch work Brother, beautiful!
Link Posted: 9/2/2010 2:14:56 PM EST
Great looking firearms! The extra detailing really sets these apart!
Link Posted: 9/2/2010 2:15:42 PM EST
Link Posted: 9/2/2010 2:31:37 PM EST
Originally Posted By jimdvan:
The LPK is all USGI surplus, the BCG is all Colt and I think the buffer is Bushmaster. As for the sear pin, I cut about .040" off each end of a sear pin on my lathe. Then I scratched a small divit in the sear pin location and epoxied the ends of the pins in place.

Awesome! Absolutely awesome! Excellent attention to detail!
Link Posted: 9/2/2010 2:34:29 PM EST

Looking good!


Congrats!

Link Posted: 9/2/2010 2:40:40 PM EST
Posted to add kudos for putting together some great looking weapons. Both are really very nice!
Link Posted: 9/3/2010 2:44:15 AM EST
Great looking weapons!

I see a Retro A2 in your near future
Link Posted: 9/3/2010 4:38:55 AM EST
Originally Posted By jimdvan:
Originally Posted By m1sniper:
Excellent job!! The C MP C mark looks real good!
Do you know the maker of the stamp set,font size and style? I've been looking for a set.


Thanks. The stamps are 3/32" and made by Gruv-Grip. Manufacturer number 698690. This is an old set so I don't know if the same set is still available.

Thank you Sir!

Link Posted: 9/3/2010 5:15:06 AM EST
Very nice! I really enjoy seeing the work everyone puts into their rifles and carbines in this forum.
Link Posted: 9/3/2010 8:51:30 AM EST
Link Posted: 9/3/2010 10:05:11 AM EST
Originally Posted By m1sniper:
Originally Posted By jimdvan:
Originally Posted By m1sniper:
Excellent job!! The C MP C mark looks real good!
Do you know the maker of the stamp set,font size and style? I've been looking for a set.


Thanks. The stamps are 3/32" and made by Gruv-Grip. Manufacturer number 698690. This is an old set so I don't know if the same set is still available.

Thank you Sir!



Do I smell a project cooking?
Ralph
Link Posted: 9/3/2010 12:16:01 PM EST
[Last Edit: 9/3/2010 12:17:40 PM EST by Beel]
Awesome work. Its the attention to detail that separates your rifle from "just another ..."
Whatcha' gonna build next?

ETA: That Jag is filthy!!!
Link Posted: 9/3/2010 2:51:07 PM EST
Great looking weapons - nice job!
Link Posted: 9/3/2010 4:18:34 PM EST
Originally Posted By F14ADC:
Originally Posted By m1sniper:
Originally Posted By jimdvan:
Originally Posted By m1sniper:
Excellent job!! The C MP C mark looks real good!
Do you know the maker of the stamp set,font size and style? I've been looking for a set.


Thanks. The stamps are 3/32" and made by Gruv-Grip. Manufacturer number 698690. This is an old set so I don't know if the same set is still available.

Thank you Sir!



Do I smell a project cooking?
Ralph


You can just see the smoke rolling out of his ears
Link Posted: 9/4/2010 4:05:27 AM EST
Great Job, you should be proud.......................
Link Posted: 9/4/2010 7:47:27 AM EST
Awesome set! Very nice attention to detail.
Link Posted: 9/4/2010 12:22:50 PM EST
I've been asked what the secret was to doing the sear pin. No big secret, just careful work. No drilling of holes just make the back of the pin and the part of the receiver rough enough for good epoxy to hold. If it falls off, do it again.
Link Posted: 9/7/2010 3:05:58 AM EST
Tell us about the powder coating!


Brick
Link Posted: 9/7/2010 7:39:45 PM EST
Here's who I used for the powder coating. Decorative Metal Finishing 1996 Don Lee Pl. Escondido, CA 92029 (760) 746-3378. I used semi-gloss black.
Top Top