Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 8/19/2003 4:08:52 PM EST
I have wanted to buy a chinese AK 7.62X39 drum for a while now, just haven't gotten around to it. Does anyone have a Norinco? The latest thing to spark my interest in it again was a CDNN add:


Any advice is appreciated.
Link Posted: 8/21/2003 5:30:31 AM EST
IMHO- popping the back cover and dumping rounds in beats the flying fuck out of stuffing them all thru the top. Rattles a bit, but who are you sneaking up on anyway?
Link Posted: 8/26/2003 6:56:13 AM EST
This is my first favorite Drum.
Second are the Romanians.

I really like these Chinese drums because I keep them all loaded up with just two turns of the spring tension key. With the tension key turned only twice that leaves the rounds in the drum but only a very small amount of tension. Therefor, you can leave these bad boys loaded forever. Also, if you get one. I would either re-paint the weld areas or just keep them lubed. I have had no rust but it seems like those places are most prone for rust.
Link Posted: 8/26/2003 4:12:12 PM EST
Thanks for the advice guys. I found one on EE and sent my M.O. It was cheaper than from CDNN. I have always wanted one and I thought I'd get a Chinese one first.
Top Top