Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 10/7/2005 12:46:32 PM EDT
Folks I am trying to put an AMD-65 wire side folder on a build. I need a drawing or instructions on how to put the folding mechanism together. I can put the trunion in the reciever but I see spaces for a locking mechanism and other things. I need to know how it goes together.

On a related note, I need help on DISASSEMBLT of an underfolder. I have good instructions on instalation but cannot seem to figure out how to get the thing apart.

Link Posted: 10/7/2005 4:07:25 PM EDT
[Last Edit: 10/7/2005 4:11:50 PM EDT by Eyegun]
Print this out and do it in reverse: UF assembly instructions

AMD instructions from: Gunco library This is the template for the rear of the receiver. With the stock extended, drop the small metal plate in the slot from above. Put the spring on the screw and insert the spring from below. Screw the screw into the bottom of the metal plate you dropped into the slot from above. Done.
Top Top