Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 12/14/2005 8:47:27 PM EDT
Anyone know where there are palns on the net to build these? I suspect they would be alot differnet to the M1 Carbine kits, or the 10/22 kits out there. I would like the plans. www.gatlingguns has then listed, but out of stock for a loong time.
Link Posted: 12/17/2005 10:31:04 AM EDT
I have thought of doing that, but maybe with SKS's instead of AK's (a lot cheaper). Rig a dual mount and use linked BMF or GAT cranks.

I have done it with MG42/22's (Ruger 10/22'w with MG42 dress up stocks). Just takes some thinking and tinkering:

Link Posted: 12/17/2005 7:24:55 PM EDT
Hmmmmm..... You use the Gat trigger dohicker that has a crank? How did you link the two together? THANK YOU FOR RESPONDING!!!! I was certain noone would. Thanks! You have me thinking now.
Link Posted: 12/18/2005 8:15:25 AM EDT
I used BMF Activators. I used a piece of threaded rod (10-32, I think) to link them. The inside parts where the handles connect have tiny holes drilled through them and the rod. 2 cotter pins keep the threaded rod from turning inside the BMF. (Not completely my idea, this was written up in a `95 copy of SAR)

I'm lookin at my GAT right now, and I see no reason the same thing wouldn't work.

I've been kicking around the idea of using a couple of SKS's, or build some AK's custom for a twin gun. That will have to be later. I have half a dozen projects first.

The receiver for my SBR Krink build came in Saturday :-)

Link Posted: 12/18/2005 9:09:38 AM EDT
you guys are using the wrong guns...

I still have a way to go to finish my project..
Link Posted: 12/18/2005 10:06:06 AM EDT
Thats Awsome!!! How much will you have in that baby when you are finished?
Link Posted: 12/18/2005 2:41:05 PM EDT
Close to $2000.00 not counting the ton of ammo it will shoot...

I can build a 1919 from a good kit for less that $750.00
plus the cost of 2 crank fires @ 200.00 each the mounts are home built using material I already had on hand..

Link Posted: 12/18/2005 4:53:32 PM EDT
Yeah, I've had a SA M1919 for a while. The problem with twin 1919's (IMHO) is the spacing between the guns. My twins above are 7" (center of barrel to center of barrel) apart. You couldn't do that with a 1919 and an M37, let alone two 1919's.

Besides, with an M1919 and a crank, rate of fire really isn't an issue.

I've been playing with the 1919 spade grips and AA sights I'm making this weekend.

Top Top