User Panel
User Panel
User Panel
|
Posted: 12/2/2021 10:02:57 AM EDT
Share your cool builds. Personally I'm into the SFF stuff and I love vertical cases because they minimize desktop footprint. I drew and 3d printed a bunch of brackets and a top/bottom and used some MakerBeam to assemble the frame for my own setup.
 |
|
|
|
Posted: 12/2/2021 10:06:31 AM EDT
[#1]
|
|
|
|
Posted: 12/2/2021 10:10:57 AM EDT
[#2]
|
|
|
|
Posted: 12/2/2021 10:17:39 AM EDT
[#3]
 Attached FileRtx3090, 5950x, 128gb Ram, 3tb NVME PCIE4, all water cooled. I have added a back side water cooling plate to the 3090 and switched away from the distribution block to a normal pump and res as the only changes from this pic. Running it with a LG c9 65” OLED 4K at 120hz, sennheiser ote cans, and Logitech mechanical keyboard. |
|
|
|
Posted: 12/2/2021 10:19:17 AM EDT
[#4]
Currently stashing parts for a build
Corsair 4000x H100 aio 980 pro gen 4 ssd Rog stirx 570e mobo Strafe mk2 keyboard Corsair m65 mouse Corsair 850 psu 32gb of ddr4 3600 Corsair vengeance ram is being delivered today Still waiting on my cpu (going with a ryzen 9 5950x) Then hopefully making a trip to the closest micro center which is like an hour from me to try and get at the very least a 3070ti Currently have a acer predator xb273 monitor I use for my Xbox series s that will be used on this but it’ll be upgrade probably when the 4000 series gpus come out and are (laugh) available  Attached File |
|
|
|
Posted: 12/2/2021 10:19:33 AM EDT
[#5]
Quote HistoryQuoted: https://www.ar15.com/media/mediaFiles/151633/394C33C4-08E7-4442-8644-54198353398A_jpe-2189050.JPG Rtx3090, 5950x, 128gb Ram, 3tb NVME PCIE4, all water cooled. I have added a back side water cooling plate to the 3090 and switched away from the distribution block to a normal pump and res as the only changes from this pic. Running it with a LG c9 65" OLED 4K at 120hz, sennheiser ote cans, and Logitech mechanical keyboard. |
|
|
|
Posted: 12/2/2021 10:20:37 AM EDT
[#6]
|
|
|
|
Posted: 12/2/2021 10:30:42 AM EDT
[#7]
Quote HistoryQuoted: Damn, you definitely didn't spare any expense there. I tend to keep my builds from 5-7y. 2020 was my due date for a new build as my prior computer was from 2014. I plan to keep this one as my primary system until 2025 at a minimum. And yea, this was a no expense spared build, there's $1400 in just water cooling components alone. Mono block, front/back GPU block, 3x 360 rads, 9 fans, distribution block, chrome hard lines, pump, 3 water temp sensors, flow rate sensor, fittings (nearly $400 in fittings), and the all important drain for maintenance  .
|
|
|
|
Posted: 12/2/2021 10:32:10 AM EDT
[#8]
|
|
|
|
Posted: 12/2/2021 10:34:28 AM EDT
[#9]
Current build is a NUC so I could bolt it to the back of my dell 43 4k, though now I have a 4TB p50 game drive wired on the lightning to run local backups faster vs the slower gigabit lan, so its not as clean.
|
|
|
|
Posted: 12/2/2021 10:35:47 AM EDT
[#10]
Quote HistoryQuoted: I tend to keep my builds from 5-7y. 2020 was my due date for a new build as my prior computer was from 2014. I plan to keep this one as my primary system until 2025 at a minimum. And yea, this was a no expense spared build, there's $1400 in just water cooling components alone. Mono block, front/back GPU block, 3x 360 rads, 9 fans, distribution block, chrome hard lines, pump, 3 water temp sensors, flow rate sensor, fittings (nearly $400 in fittings), and the all important drain for maintenance .
|
|
|
|
Posted: 12/2/2021 10:49:32 AM EDT
[#11]
|
|
|
|
Posted: 12/2/2021 11:48:10 AM EDT
[#12]
|
|
|
|
Posted: 12/2/2021 11:53:36 AM EDT
[#13]
Not crazy, but I like it.
Ryzen 5600X with 32GB Ram. Currently using a RadeonPro WX8200 for CAD work. Will probably buy a gaming card once supply is normal again.  |
|
|
|
Posted: 12/2/2021 11:57:43 AM EDT
[#14]
Quote HistoryQuoted: Not crazy, but I like it. Ryzen 5600X with 32GB Ram. Currently using a RadeonPro WX8200 for CAD work. Will probably buy a gaming card once supply is normal again. https://i.postimg.cc/rsh7jmXd/20210311-115905.jpg |
|
|
|
Posted: 12/2/2021 12:02:36 PM EDT
[#15]
Altair
 |
|
|
|
Posted: 12/2/2021 12:06:19 PM EDT
[#16]
Quote HistoryNice! |
|
|
|
Posted: 12/2/2021 12:07:51 PM EDT
[#17]
Quote HistoryQuoted: https://www.ar15.com/media/mediaFiles/151633/394C33C4-08E7-4442-8644-54198353398A_jpe-2189050.JPG Rtx3090, 5950x, 128gb Ram, 3tb NVME PCIE4, all water cooled. I have added a back side water cooling plate to the 3090 and switched away from the distribution block to a normal pump and res as the only changes from this pic. Running it with a LG c9 65” OLED 4K at 120hz, sennheiser ote cans, and Logitech mechanical keyboard. Damn. Oh, and the active backplate is a great add-on. Got one on my 3080. Water cooled 3080, 5950x with an AIO. The little gizmo at the top is a little vacuum pump that actively prevents any kind of leaking. I went with hard tubing. Total pain in the ass.  |
|
|
|
Posted: 12/2/2021 12:09:19 PM EDT
[#18]
I've been wanting one of these:
|
|
|
|
Posted: 12/2/2021 12:09:45 PM EDT
[#19]
just missing the homer bucket
  |
|
|
|
Posted: 12/2/2021 12:13:08 PM EDT
[#20]
Quote Historyyou may want to look into a new cpu fan.
|
|
|
|
Posted: 12/2/2021 12:22:02 PM EDT
[#21]
Quote HistoryQuoted: you may want to look into a new cpu fan. |
|
|
|
Posted: 12/2/2021 12:24:40 PM EDT
[#22]
Quote HistoryQuoted: It's running |
|
|
|
Posted: 12/2/2021 12:25:34 PM EDT
[#23]
Quote HistoryIt’s amusing to look at cardboard box builds |
|
|
|
Posted: 12/2/2021 12:27:21 PM EDT
[#24]
Quoted: Share your cool builds. Personally I'm into the SFF stuff and I love vertical cases because they minimize desktop footprint. I drew and 3d printed a bunch of brackets and a top/bottom and used some MakerBeam to assemble the frame for my own setup. https://i.imgur.com/DqhZ5yw.jpg I'm all about the SFF. I recently got a Yuel Beast Monument and will be making a mostly passive setup with the Noctua NH-P1 (Vid cards are harder to passively cool). Current setup is a 3 yo Alienware laptop with missing f and w keys hooked up to an external monitor. Fuck Alienware and Dell. |
|
|
|
Posted: 12/2/2021 12:31:35 PM EDT
[#25]
Quote HistoryQuoted: I'm all about the SFF. I recently got a Yuel Beast Monument and will be making a mostly passive setup with the Noctua NH-P1 (Vid cards are harder to passively cool). Current setup is a 3 yo Alienware laptop with missing f and w keys hooked up to an external monitor. Fuck Alienware and Dell. Quote HistoryQuoted: Quoted: Share your cool builds. Personally I'm into the SFF stuff and I love vertical cases because they minimize desktop footprint. I drew and 3d printed a bunch of brackets and a top/bottom and used some MakerBeam to assemble the frame for my own setup. https://i.imgur.com/DqhZ5yw.jpg I'm all about the SFF. I recently got a Yuel Beast Monument and will be making a mostly passive setup with the Noctua NH-P1 (Vid cards are harder to passively cool). Current setup is a 3 yo Alienware laptop with missing f and w keys hooked up to an external monitor. Fuck Alienware and Dell. |
|
|
|
Posted: 12/2/2021 12:34:56 PM EDT
[#26]
Quote HistoryQuoted: The Monument is awesome, I've just always been wary of committing to a really small GPU (especially in today's market where any GPU is scarce.) Quote HistoryQuoted: Quoted: Quoted: Share your cool builds. Personally I'm into the SFF stuff and I love vertical cases because they minimize desktop footprint. I drew and 3d printed a bunch of brackets and a top/bottom and used some MakerBeam to assemble the frame for my own setup. https://i.imgur.com/DqhZ5yw.jpg I'm all about the SFF. I recently got a Yuel Beast Monument and will be making a mostly passive setup with the Noctua NH-P1 (Vid cards are harder to passively cool). Current setup is a 3 yo Alienware laptop with missing f and w keys hooked up to an external monitor. Fuck Alienware and Dell. I've seen pics of the higher end cards and it doesn't look too stupid... https://www.reddit.com/r/sffpc/comments/qwyzzc/amd_motif_monument_build/ https://www.reddit.com/r/sffpc/comments/oylqpe/motif_monument_fixing_gpu_temperatures/ |
|
|
|
Posted: 12/2/2021 12:35:21 PM EDT
[#27]
I'm not much into RGB on my computer builds (in fact I have no use for it at all).
The case just sits underneath out of sight - I just need/want as much cooling as I can get. My computer case is nothing much to look at if you are into something that looks like Walt Disney threw up - but it works perfectly for my needs.  |
|
|
|
Posted: 12/2/2021 12:38:58 PM EDT
[#28]
My last build I wanted something easy to transport. I went with a Thermaltake Core V1. You can take the top and both side panels off which made building it very easy. Litter fucker still has 4 hard drive slots.
Not flashy, but cool in it's own way. |
|
|
|
Posted: 12/2/2021 12:40:41 PM EDT
[#29]
Nothing cool looking about my setup. My AntecP100 cause is made for silence, not show.... and it does a darn good job of that!
All my internals are black with no RBG 
|
|
|
|
Posted: 12/2/2021 12:43:20 PM EDT
[#30]
"Cool" case, huh?
Weeeeeell, nothing like that here, unless you call the Antec Three Hundred "cool". I mean, it runs pretty cool, but it don't have much going it in the looks department. |
|
|
|
Posted: 12/2/2021 12:45:19 PM EDT
[#31]
Quote HistoryQuoted: I've seen pics of the higher end cards and it doesn't look too stupid... https://www.reddit.com/r/sffpc/comments/qwyzzc/amd_motif_monument_build/ https://www.reddit.com/r/sffpc/comments/oylqpe/motif_monument_fixing_gpu_temperatures/ Quote HistoryQuoted: Quoted: Quoted: Quoted: Share your cool builds. Personally I'm into the SFF stuff and I love vertical cases because they minimize desktop footprint. I drew and 3d printed a bunch of brackets and a top/bottom and used some MakerBeam to assemble the frame for my own setup. https://i.imgur.com/DqhZ5yw.jpg I'm all about the SFF. I recently got a Yuel Beast Monument and will be making a mostly passive setup with the Noctua NH-P1 (Vid cards are harder to passively cool). Current setup is a 3 yo Alienware laptop with missing f and w keys hooked up to an external monitor. Fuck Alienware and Dell. I've seen pics of the higher end cards and it doesn't look too stupid... https://www.reddit.com/r/sffpc/comments/qwyzzc/amd_motif_monument_build/ https://www.reddit.com/r/sffpc/comments/oylqpe/motif_monument_fixing_gpu_temperatures/ |
|
|
|
Posted: 12/2/2021 12:48:53 PM EDT
[#32]
Quote HistoryNow THAT...That's COOL! |
|
|
|
Posted: 12/2/2021 12:59:00 PM EDT
[#33]
Quote HistoryQuoted: ... Rtx3090, 5950x, 128gb Ram, 3tb NVME PCIE4, all water cooled. ... Are you doing anything or running anything that pushes or needs a build like that? Or is this more "I'll climb Mt Everest. Why? Because its there" or future proofing? |
|
|
|
Posted: 12/2/2021 1:09:08 PM EDT
[#34]
Quote HistoryQuoted: Are you doing anything or running anything that pushes or needs a build like that? Or is this more "I'll climb Mt Everest. Why? Because its there" or future proofing? Quote HistoryQuoted: Quoted: ... Rtx3090, 5950x, 128gb Ram, 3tb NVME PCIE4, all water cooled. ... Are you doing anything or running anything that pushes or needs a build like that? Or is this more "I'll climb Mt Everest. Why? Because its there" or future proofing? He did mention keeping them for 5-7 years. |
|
|
|
Posted: 12/2/2021 1:09:44 PM EDT
[#35]
Quote HistoryQuoted: "Cool" case, huh? Weeeeeell, nothing like that here, unless you call the Antec Three Hundred "cool". I mean, it runs pretty cool, but it don't have much going it in the looks department. Shit, now that's a name I haven't heard in a long time. |
|
|
|
Posted: 12/2/2021 1:16:37 PM EDT
[#36]
I want to see someone post up their submersed oil-cooled homelab
|
|
|
|
Posted: 12/2/2021 1:25:32 PM EDT
[#37]
Quote HistoryQuoted: I want to see someone post up their submersed oil-cooled homelab |
|
|
|
Posted: 12/2/2021 2:15:53 PM EDT
[#38]
Quote HistoryQuoted: Are you doing anything or running anything that pushes or needs a build like that? Or is this more "I'll climb Mt Everest. Why? Because its there" or future proofing? It was a couple things: 1. 2020 component availability, I wanted a 3080 and a 5900 but couldn't get what I wanted and got a 3090 and 5950. 2. Future proofing, I keep my rigs for 5-7y. 3. It was fun and I had been planning a fun build for a couple years leading up to this. |
|
|
|
Posted: 12/2/2021 2:19:04 PM EDT
[#39]
Quote HistoryQuoted: Nothing cool looking about my setup. My AntecP100 cause is made for silence, not show.... and it does a darn good job of that! All my internals are black with no RBG https://external-content.duckduckgo.com/iu/?u=https%3A%2F%2Fwww.cclonline.com%2Fimages%2Favante%2Fanteccsp100.jpg&f=1&nofb=1  Attached File
|
|
|
|
Posted: 12/2/2021 2:20:05 PM EDT
[#40]
Quote HistoryFTW!! |
|
|
|
Posted: 12/2/2021 2:21:16 PM EDT
[#41]
Quote HistoryQuoted: It was a couple things: 1. 2020 component availability, I wanted a 3080 and a 5900 but couldn't get what I wanted and got a 3090 and 5950. 2. Future proofing, I keep my rigs for 5-7y. 3. It was fun and I had been planning a fun build for a couple years leading up to this. Is that a $10,000 rig? |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
Attached File