[ARCHIVED THREAD] - $300 AR thread for Spring! (Page 6 of 23)
|
Quoted:
I meant to ask what the limit was is Apparently 10. See below. |
|
Quoted:
By the time you're reached the limit there's a BATFE agent asking if you're giving all those away for Christmas or he can he buy a few off you and give you a little something for your trouble? Quoted:
Quoted:
I meant to ask what the limit was is |
|
Quoted:
And here we go! It's legal as a pistol lower b/c it was never assembled as a rifle or shotgun. You can buy an number of new fully assembled AR lowers, remove the carbine stock, and throw on a sub 16" bbl upper. Voila! Legal AR pistol. I ordered 2 of the .223" uppers. If they have rusty bores, they'll go back. I bought my 5.7x28mm upper off Classic and have been quite happy w/ it. |
|
Quoted: I had the impression that if it had ever had a stock attached it was considered a rifle receiver. If I was wrong, good-it's a stupid fucking law anyway. |
|
Quoted:
At $20 it's hard not to buy one just for a .22lr build or gift or just to throw your extra parts onto to make a functional firearm, just cause. Then I start to ponder if I should write the $200 check to SBR a $20 lower for an ultralightweight .22lr build...
|
|
Can someone confirm the length of pull on these?
How much can they be cut down? What is involved in cutting them down? Does the buttplate need to be ground down? Is there still something left to screw the buttplate to, or do you have to come up with some sort of fix? Thanks |
|
Quoted: Can someone confirm the length of pull on these?
How much can they be cut down? What is involved in cutting them down? Does the buttplate need to be ground down? Is there still something left to screw the buttplate to, or do you have to come up with some sort of fix? Thanks Attached File To the end of the carbine length buffer tube. Beyond, if you're making a .22" LR or you're using an ARAK or other non-buffered upper. Dremel, chop saw, hacksaw, hotwire knife, a really long time w/ sandpaper, what have you. No, buttplate unscrews. Two separate sizes of hex nuts. 
No, there are steel screw threads embedded in the rear of the stock which you've just cut off, and you'll have to cut the buttplate down to fit the smaller butt once you cut the stock down, so you'll probably need to glue it unless you're making a pistol, see above. |
|
Quite welcome. When Andersons got down to $30, I wondered how he was gonna sell em. 5x for $100 w/ free shipping is a pretty good answer, I think.
I wish I was gonna be there Saturday, but I'll have to drown my sorrows in Tulsa w/ 40xb. Going to the museum Friday. 
|
|
Quoted: Are they still available? How exactly does this transfer by, is it considered a rifle since it can only have a stock. or is it still considered an other? 1 more year until im out of purgatory and buy the fun stuff As far as I'm aware, he's still got 'em - and is planning to be selling them over the counter on Saturday. |
|
Classic has sold out of the $200 complete uppers. You can buy the same thing directly from Bear Creek for $251:
http://www.bearcreekarsenal.com/upper-assemblies/bca-branded-16-6-5-grendel-type-ii-ar-15-complete-upper-assembly-ua6-5cm41618-p-shg The owner of Trinity Ordnance texted me a video last night of lowers strewn around the shop as they were packing them. He then texted me after midnight saying they've packed 25% of the orders last night & they were headed home. He lowballed the shipping on these, as it turns out, so even if he runs this sale again, shipping will be higher. Some of y'all will probably not ship until next week, as they're also getting the shop ready for the Customer Appreciation Party. There is still time to order. |
|
Quoted:
Classic has sold out of the $200 complete uppers. You can buy the same thing directly from Bear Creek for $251: http://www.bearcreekarsenal.com/upper-assemblies/bca-branded-16-6-5-grendel-type-ii-ar-15-complete-upper-assembly-ua6-5cm41618-p-shg The owner of Trinity Ordnance texted me a video last night of lowers strewn around the shop as they were packing them. He then texted me after midnight saying they've packed 25% of the orders last night & they were headed home. He lowballed the shipping on these, as it turns out, so even if he runs this sale again, shipping will be higher. Some of y'all will probably not ship until next week, as they're also getting the shop ready for the Customer Appreciation Party. There is still time to order. |
|
Quoted:
they do have the uppers minus bcg and ch for 129 dollars. that is a deal really, I mean who doesnt have an extra bdg or ch laying in the parts bin Quoted:
Quoted:
Classic has sold out of the $200 complete uppers. You can buy the same thing directly from Bear Creek for $251: http://www.bearcreekarsenal.com/upper-assemblies/bca-branded-16-6-5-grendel-type-ii-ar-15-complete-upper-assembly-ua6-5cm41618-p-shg The owner of Trinity Ordnance texted me a video last night of lowers strewn around the shop as they were packing them. He then texted me after midnight saying they've packed 25% of the orders last night & they were headed home. He lowballed the shipping on these, as it turns out, so even if he runs this sale again, shipping will be higher. Some of y'all will probably not ship until next week, as they're also getting the shop ready for the Customer Appreciation Party. There is still time to order. Toolcraft Phosphate 158 Bolt Carrier Group - MPI Bolt - M16 Carrier This Toolcraft MPI inspected 158 Phosphate BCG comes with a lifetime warranty and is perfect for any AR15, M4 or M16 Build. Toolcraft carriers and bolts are build to military specifications, also known as "Mil-Spec" and they are known throughout the industry as some of the best. Toolcraft Bolt Carrier Groups come with a lifetime warranty!
|
|
Sweet! Once I get back from Tulsa I think we'll keep this thread going w/ the pre-Christmas sales. We should be able to keep it pretty close to $300.
Trinity Ordnance just texted me they are shipping some of the orders today. Specifically NOT yours. You. That is reading this. Yours is NOT shipping today. It didn't ship yet. It won't ship til next week. But other folks' lowers shipped today. Just not yours.
|
|
Quoted:
Trinity Ordnance just texted me they are shipping some of the orders today. Specifically NOT yours. You. That is reading this. Yours is NOT shipping today. It didn't ship yet. It won't ship til next week. But other folks' lowers shipped today. Just not yours. 
|
|
Bear Creek Arsenal is also giving away barrels to vets for Veterans day.
Attached File |
|
Quoted:
Bear Creek Arsenal is also giving away barrels to vets for Veterans day. https://www.AR15.Com/media/mediaFiles/60540/FB_IMG_1510247932364-357752.JPG |
|
Quoted:
Bear Creek Arsenal is also giving away barrels to vets for Veterans day. https://www.AR15.Com/media/mediaFiles/60540/FB_IMG_1510247932364-357752.JPG |
|
Quoted:
I hesitated because I didn't want to go through the hassle, but yep, they had Sound Loan on file. 5 on the way. OP will have to get us a total number sold on Monday! He didn't give me a number. His response was "...SIGH....Oh my God, YES!" 
They had to have been sitting on an assload of these things. |
|
Quoted:
Bear Creek Arsenal is also giving away barrels to vets for Veterans day. https://www.AR15.Com/media/mediaFiles/60540/FB_IMG_1510247932364-357752.JPG |
|
I was bummed that I missed the $200 uppers from Classic,but then got an email from Primary Arms last night that had this on sale...
Attached File A bit of a direction change from what I had intended with the one I was going to build out right now, but still happy with it. |
[ARCHIVED THREAD] - $300 AR thread for Spring! (Page 6 of 23)
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter