Armory Sponsor
STRIBOG SP9A1, SP9A3, SP10A3, SP45A3 (Page 52 of 82)
|
https://www.instagram.com/p/CHq9oIIJbAb/?utm_source=ig_web_button_share_sheet Lingle Scorpion mag lower prototype test video. |
|
Originally Posted By mchgnxj24: Scorpion lower!!!! Lots of prayers to the Gun Gods answered here. If they can keep it at the ~$200-250 price point, like their Bren lowers, I’m absolutely in. Scorpion Mag Lower I did preliminary design of a Skorpion Stribog lower for a previous employer in fall of 2019, but we/they never went anywhere with it. As an engineer, I feel vindicated that they couldn't come up with a more attractive forward magwell profile solution for this design challenge than I could  --it's unavoidably ugly out front, there. My design used an exaggerated flare lip/finger hook to try & make it look nicer, mostly unsuccessfully.
|
|
Originally Posted By mchgnxj24: Me too. I'm not too keen on the composite materials, but for a couple hundred $$, I'll give it a shot. If one of them announces an aluminum version, I'll be holding off for that. Originally Posted By mchgnxj24: Originally Posted By mk4dubbin: I'm pretty excited about this Me too. I'm not too keen on the composite materials, but for a couple hundred $$, I'll give it a shot. If one of them announces an aluminum version, I'll be holding off for that. FWIW, the factory Stribog lower's materials aren't worth writing home about, either. |
|
Originally Posted By Evintos: https://www.instagram.com/p/CHq9oIIJbAb/?utm_source=ig_web_button_share_sheet Lingle Scorpion mag lower prototype test video. Awesome; a curved mag is the last thing the gun needed to look like something wielded by an 80's Saturday morning cartoon henchman
|
|
Originally Posted By barnbwt: FWIW, the factory Stribog lower's materials aren't worth writing home about, either. Originally Posted By barnbwt: Originally Posted By mchgnxj24: Originally Posted By mk4dubbin: I'm pretty excited about this Me too. I'm not too keen on the composite materials, but for a couple hundred $$, I'll give it a shot. If one of them announces an aluminum version, I'll be holding off for that. FWIW, the factory Stribog lower's materials aren't worth writing home about, either. I agree, but it has held up well. That being said, I would absolutely prefer aluminum. |
|
Originally Posted By barnbwt: I did preliminary design of a Skorpion Stribog lower for a previous employer in fall of 2019, but we/they never went anywhere with it. As an engineer, I feel vindicated that they couldn't come up with a more attractive forward magwell profile solution for this design challenge than I could --it's unavoidably ugly out front, there. My design used an exaggerated flare lip/finger hook to try & make it look nicer, mostly unsuccessfully.Originally Posted By barnbwt: Originally Posted By mchgnxj24: Scorpion lower!!!! Lots of prayers to the Gun Gods answered here. If they can keep it at the ~$200-250 price point, like their Bren lowers, I’m absolutely in. Scorpion Mag Lower I did preliminary design of a Skorpion Stribog lower for a previous employer in fall of 2019, but we/they never went anywhere with it. As an engineer, I feel vindicated that they couldn't come up with a more attractive forward magwell profile solution for this design challenge than I could --it's unavoidably ugly out front, there. My design used an exaggerated flare lip/finger hook to try & make it look nicer, mostly unsuccessfully.Yep, it sure as hell is ugly. Manufacturing it in black may help, but not much. A3 Tactical(you?) is slightly better... not by much. though. |
|
Originally Posted By Evintos: Color adjusted image - Courtesy of D.L. on the Stribog FB group. https://scontent-ort2-1.xx.fbcdn.net/v/t1.0-9/125491510_10113525552431535_1791468698294123296_n.jpg?_nc_cat=104&ccb=2&_nc_sid=dbeb18&_nc_ohc=PAf4UB46040AX_1F0wd&_nc_ht=scontent-ort2-1.xx&oh=68313f3e982d6b92b33dabee0b075744&oe=5FD97BF1 Originally Posted By Evintos: Originally Posted By mchgnxj24: Yep, it sure as hell is ugly. Manufacturing it in black may help, but not much. A3 Tactical(you?) is slightly better... not by much. though. Color adjusted image - Courtesy of D.L. on the Stribog FB group. https://scontent-ort2-1.xx.fbcdn.net/v/t1.0-9/125491510_10113525552431535_1791468698294123296_n.jpg?_nc_cat=104&ccb=2&_nc_sid=dbeb18&_nc_ohc=PAf4UB46040AX_1F0wd&_nc_ht=scontent-ort2-1.xx&oh=68313f3e982d6b92b33dabee0b075744&oe=5FD97BF1 Better...still looks like someone proned the mag too hard and kinked the magwell |
|
Originally Posted By Evintos: Color adjusted image - Courtesy of D.L. on the Stribog FB group. https://scontent-ort2-1.xx.fbcdn.net/v/t1.0-9/125491510_10113525552431535_1791468698294123296_n.jpg?_nc_cat=104&ccb=2&_nc_sid=dbeb18&_nc_ohc=PAf4UB46040AX_1F0wd&_nc_ht=scontent-ort2-1.xx&oh=68313f3e982d6b92b33dabee0b075744&oe=5FD97BF1 Not terrible, but it will probably look better with a Zhukov. |
|
Originally Posted By Evintos: Color adjusted image - Courtesy of D.L. on the Stribog FB group. https://scontent-ort2-1.xx.fbcdn.net/v/t1.0-9/125491510_10113525552431535_1791468698294123296_n.jpg?_nc_cat=104&ccb=2&_nc_sid=dbeb18&_nc_ohc=PAf4UB46040AX_1F0wd&_nc_ht=scontent-ort2-1.xx&oh=68313f3e982d6b92b33dabee0b075744&oe=5FD97BF1 Not terrible, but it will probably look better with a Zhukov. |
|
Originally Posted By DSArms_FAL: I just received 3 A1s from joe bobs. 1 came in a different case and has a straight trigger. It appears there are some rolling changes in the stribog a1 line. Why did you buy 3 if I may ask btw? Are you an FFL? Also, are you the real DSA Arms who make the FAL in IL. The manufacturer? If so, glad to have you here :) |
|
Originally Posted By barnbwt: I mean, the original does, so... Originally Posted By barnbwt: Originally Posted By BuickDan: Any chance this scorpion mag lower uses an AR-15 FCG? I mean, the original does, so... Per their Link and information copied and pasted from their website and instagram post. https://lingleindustries.com/stribog-scorpion-lower/ THE SCORPOIN STRIBOG LOWER WILL BE RELEASED IN EARLY DECEMBER! The Scorpoin Stribog Lower uses most Scorpion Evo Magazines and magazine releases as well as AR trigger groups, grips and safety selectors. ***This lower is not a firearm and does NOT need to be shipped to an FFL*** Recommended Trigger List - .280" or less is recommended. MANUFACTURERMODELHAMMER WIDTH (in.) Grand PowerFactory.205" AmericanAR Gold.209" CMCFlat.206" ELFMatch Pro SE.250" GeisseleS3G.202" GeisseleSD/SSA/G2.198" JPERoller.199" KE ArmsSLT2.250" LaRue TacticalMBT-2.197" Rise Armament .248" *Note: Not all magazines are compatable with this lower. Magpul magazines are recommended as they fit and feed reliably. Factory CZ Scorpion magazines are not compatable with this lower due to the (Note: This portion grabbed from their instagram post https://www.instagram.com/p/CH38IyvJObP/ Factory scorpion and PSA AKV, mags do not fit with the factory BHO, Factory CZ mags shown in pics 2, 4 and 5. They are too wide to fit inside the BHO but they feed very reliably. The last image shows a modified @hb_industries BHO opened up slightly and all mags function with the BHO flawlessly.) . Features: - Utilizes Factory Last Round Bolt Hold Open. - Optional Strike Industires Magazine release installed. - Compatiable with most AR trigger groups and grips. - Compatiable with most CZ Scorpion magazine releases. - Typical lead time is 1 week. - Made from Nylon, dyed and shotpeened for additional strength. Produced by Multi Jet Fusion or MJF. Upgraded takedown pins can be purchased from: https://inleadwetrust.com/product/stribog-takedown-pins/ |
| My A3 was in the range of serial numbers that required a recall. I just got my bolt and locking block back and it doesn't even function now, pulling the charging handle is impossible. I've had a $1900 paperweight for almost a month now. Pisses me off to no end. |
|
Originally Posted By HitTheForwardAssist: My A3 was in the range of serial numbers that required a recall. I just got my bolt and locking block back and it doesn't even function now, pulling the charging handle is impossible. I've had a $1900 paperweight for almost a month now. Pisses me off to no end. $1250 paper weight here. Haven't fired a single round. Waiting on my RMA label authorization...whatever it is. So, waiting to wait. |
|
Originally Posted By HitTheForwardAssist: My A3 was in the range of serial numbers that required a recall. I just got my bolt and locking block back and it doesn't even function now, pulling the charging handle is impossible. I've had a $1900 paperweight for almost a month now. Pisses me off to no end. Originally Posted By HK45USER: $1250 paper weight here. Haven't fired a single round. Waiting on my RMA label authorization...whatever it is. So, waiting to wait. Wait!! You guys saying the newer version released in the past few days which are advertised as 'new bolt' and other parts are not working? These are being heavily advertised on gunzonedeals/gunprodeals.com |
|
Received my A3 recall/upgrade parts. Brand new pistol never fired. Wishing I had never sent in my parts now. I sent my roller in with the original bolt and locker and they didn't send it back. New bolt does not have any engraving like the original bolt. Surface finish and machining on the new locker looks like crap. 
|
|
Originally Posted By Evintos: Per their Link and information copied and pasted from their website and instagram post. https://lingleindustries.com/stribog-scorpion-lower/ THE SCORPOIN STRIBOG LOWER WILL BE RELEASED IN EARLY DECEMBER! The Scorpoin Stribog Lower uses most Scorpion Evo Magazines and magazine releases as well as AR trigger groups, grips and safety selectors. ***This lower is not a firearm and does NOT need to be shipped to an FFL*** Recommended Trigger List - .280" or less is recommended. MANUFACTURERMODELHAMMER WIDTH (in.) Grand PowerFactory.205" AmericanAR Gold.209" CMCFlat.206" ELFMatch Pro SE.250" GeisseleS3G.202" GeisseleSD/SSA/G2.198" JPERoller.199" KE ArmsSLT2.250" LaRue TacticalMBT-2.197" Rise Armament .248" *Note: Not all magazines are compatable with this lower. Magpul magazines are recommended as they fit and feed reliably. Factory CZ Scorpion magazines are not compatable with this lower due to the (Note: This portion grabbed from their instagram post https://www.instagram.com/p/CH38IyvJObP/ Factory scorpion and PSA AKV, mags do not fit with the factory BHO, Factory CZ mags shown in pics 2, 4 and 5. They are too wide to fit inside the BHO but they feed very reliably. The last image shows a modified @hb_industries BHO opened up slightly and all mags function with the BHO flawlessly.) . Features: - Utilizes Factory Last Round Bolt Hold Open. - Optional Strike Industires Magazine release installed. - Compatiable with most AR trigger groups and grips. - Compatiable with most CZ Scorpion magazine releases. - Typical lead time is 1 week. - Made from Nylon, dyed and shotpeened for additional strength. Produced by Multi Jet Fusion or MJF. Upgraded takedown pins can be purchased from: https://inleadwetrust.com/product/stribog-takedown-pins/ Originally Posted By Evintos: Originally Posted By barnbwt: Originally Posted By BuickDan: Any chance this scorpion mag lower uses an AR-15 FCG? I mean, the original does, so... Per their Link and information copied and pasted from their website and instagram post. https://lingleindustries.com/stribog-scorpion-lower/ THE SCORPOIN STRIBOG LOWER WILL BE RELEASED IN EARLY DECEMBER! The Scorpoin Stribog Lower uses most Scorpion Evo Magazines and magazine releases as well as AR trigger groups, grips and safety selectors. ***This lower is not a firearm and does NOT need to be shipped to an FFL*** Recommended Trigger List - .280" or less is recommended. MANUFACTURERMODELHAMMER WIDTH (in.) Grand PowerFactory.205" AmericanAR Gold.209" CMCFlat.206" ELFMatch Pro SE.250" GeisseleS3G.202" GeisseleSD/SSA/G2.198" JPERoller.199" KE ArmsSLT2.250" LaRue TacticalMBT-2.197" Rise Armament .248" *Note: Not all magazines are compatable with this lower. Magpul magazines are recommended as they fit and feed reliably. Factory CZ Scorpion magazines are not compatable with this lower due to the (Note: This portion grabbed from their instagram post https://www.instagram.com/p/CH38IyvJObP/ Factory scorpion and PSA AKV, mags do not fit with the factory BHO, Factory CZ mags shown in pics 2, 4 and 5. They are too wide to fit inside the BHO but they feed very reliably. The last image shows a modified @hb_industries BHO opened up slightly and all mags function with the BHO flawlessly.) . Features: - Utilizes Factory Last Round Bolt Hold Open. - Optional Strike Industires Magazine release installed. - Compatiable with most AR trigger groups and grips. - Compatiable with most CZ Scorpion magazine releases. - Typical lead time is 1 week. - Made from Nylon, dyed and shotpeened for additional strength. Produced by Multi Jet Fusion or MJF. Upgraded takedown pins can be purchased from: https://inleadwetrust.com/product/stribog-takedown-pins/ Shot peening plastic makes it stronger? Learn something new every day. Props for calling it Nylon and not "polyamide." |
|
Originally Posted By N_Parker: Received my A3 recall/upgrade parts. Brand new pistol never fired. Wishing I had never sent in my parts now. I sent my roller in with the original bolt and locker and they didn't send it back. New bolt does not have any engraving like the original bolt. Surface finish and machining on the new locker looks like crap. https://imagizer.imageshack.com/v2/1280x1024q90/924/72VLcR.jpg Thought for sure I would have heard back From Global by now on my missing roller and some comment on the condition of the locker I received but nothing. |
|
Originally Posted By bob9181: Wait!! You guys saying the newer version released in the past few days which are advertised as 'new bolt' and other parts are not working? These are being heavily advertised on gunzonedeals/gunprodeals.com My new bolt and locking block are not working. Not to mention it looks ugly as hell. I'm tired of having a paperweight in my safe. I'm still waiting on a replacement for my replacement. |
| I picked-up a new A1 version with side folding Brace a few weeks ago. It's ran 100% with CCI 115 gr. & my 124 gr. reloads. This was using 30's & 20 round mags. Mine seems to be extremely accurate. Not sure if I prefer it over my Scorpions? I'll have to go shoot them side by side. |
|
Originally Posted By Evintos: https://scontent-ort2-1.xx.fbcdn.net/v/t1.0-9/129017531_10100766778817270_8634756846191958105_n.jpg?_nc_cat=106&ccb=2&_nc_sid=dbeb18&_nc_ohc=0HNT4FZQrUYAX8Ax58o&_nc_ht=scontent-ort2-1.xx&oh=2eb3bde3f0a2c61ccc9488326f2fca76&oe=5FEE638F Colt mag lower for more of the UMP40/45 look. THAT is the one I've been waiting for. I'm heavily invested in the Scorpion platform, but I hate the way the magazines look with the Stribog... the Colt mags seem to fit better aesthetically. |
|
Are the gen 3's worth it? My FFL has 2 in stock gen 2's for $675. He has 10 gen 3's coming in next week. But the gen 3's are in the upper $900 price . Bothe the ven 2 and 3 are pistol, no brace. I have been looking at the stribog and the scorpion to do a SBR suppressor host. |
|
Originally Posted By Snert: Are the gen 3's worth it? My FFL has 2 in stock gen 2's for $675. He has 10 gen 3's coming in next week. But the gen 3's are in the upper $900 price . Both the Gen 2 and 3 are pistol, no brace. I have been looking at the stribog and the scorpion to do a SBR suppressor host. There are 3 basic variations of the A1 that I have seen. (1) was the original imported by Eagle and has a reciprocating charging handle and a 2 rod recoil assembly. (2) has a non-reciprocating charging handle and a 2 rod recoil assembly. (3) has a non-reciprocating charging handle and a new design with a larger single recoil rod assembly. Version (3) design changes introduced "spent cases bouncing back behind the bolt" failures. I consider (2) the apex of design at this point in terms of reliability. This is the version that made the Stribog a star in the market. If I had to choose, I would choose (2) first, but an A3 over A1 version (3), since both have the weakness of the newer single rod design, but the A3 has softer recoil. |
|
Originally Posted By Evintos: https://scontent-ort2-1.xx.fbcdn.net/v/t1.0-9/129017531_10100766778817270_8634756846191958105_n.jpg?_nc_cat=106&ccb=2&_nc_sid=dbeb18&_nc_ohc=0HNT4FZQrUYAX8Ax58o&_nc_ht=scontent-ort2-1.xx&oh=2eb3bde3f0a2c61ccc9488326f2fca76&oe=5FEE638F Colt mag lower for more of the UMP40/45 look. I guess the only question is "which mag is more reliable with the Stribog"? |
|
Originally Posted By Bradley5050: There are 3 basic variations of the A1 that I have seen. (1) was the original imported by Eagle and has a reciprocating charging handle and a 2 rod recoil assembly. (2) has a non-reciprocating charging handle and a 2 rod recoil assembly. (3) has a non-reciprocating charging handle and a new design with a larger single recoil rod assembly. Version (3) design changes introduced "spent cases bouncing back behind the bolt" failures. I consider (2) the apex of design at this point in terms of reliability. This is the version that made the Stribog a star in the market. If I had to choose, I would choose (2) first, but an A3 over A1 version (3), since both have the weakness of the newer single rod design, but the A3 has softer recoil. Originally Posted By Bradley5050: Originally Posted By Snert: Are the gen 3's worth it? My FFL has 2 in stock gen 2's for $675. He has 10 gen 3's coming in next week. But the gen 3's are in the upper $900 price . Both the Gen 2 and 3 are pistol, no brace. I have been looking at the stribog and the scorpion to do a SBR suppressor host. There are 3 basic variations of the A1 that I have seen. (1) was the original imported by Eagle and has a reciprocating charging handle and a 2 rod recoil assembly. (2) has a non-reciprocating charging handle and a 2 rod recoil assembly. (3) has a non-reciprocating charging handle and a new design with a larger single recoil rod assembly. Version (3) design changes introduced "spent cases bouncing back behind the bolt" failures. I consider (2) the apex of design at this point in terms of reliability. This is the version that made the Stribog a star in the market. If I had to choose, I would choose (2) first, but an A3 over A1 version (3), since both have the weakness of the newer single rod design, but the A3 has softer recoil. A1 version 1 can easily be converted to non reciprocating with the HBI kit. So A1 versions 1 or 2 are both good to go. Reports of A1 version 3 have been hit and miss. My A1 version 1 is what started this thread and it has been rock solid. Sorely disappointed with my A3 at the moment. I never even had a chance to shoot it prior to sending in my parts. Global never returned the roller and no replies to my e-mails. $1k paperweight at the moment. |
|
Originally Posted By N_Parker: I just received an in stock alert from Joe Bobs https://www.joeboboutfitters.com/Grand-Power-Stribog-SP9A3-Roller-Delayed-9MM-8-30-p/gun-stribog-sp9a3.htm A grand? I thought these were $699? Not that I’ve paid attention in two years, admittedly |
I wouldn't stand in front of a piss-filled supersoaker. Does that make it a good pistol? - Caboose314
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet
|
Originally Posted By N_Parker: A1 version 1 can easily be converted to non reciprocating with the HBI kit. So A1 versions 1 or 2 are both good to go. Reports of A1 version 3 have been hit and miss. My A1 version 1 is what started this thread and it has been rock solid. Sorely disappointed with my A3 at the moment. I never even had a chance to shoot it prior to sending in my parts. Global never returned the roller and no replies to my e-mails. $1k paperweight at the moment. That is so irritating. I wonder if they are heavily under water between filling non bog related orders and handling the recall. I ordered a mag a week or two ago that hasn't shipped yet. I've been pretty disappointed how they handled the whole recall in general. Very little information, no option to retain the original locking block, no factory markings on the replacement parts, and missing parts/nonfunctional parts being sent back out. My BOG was flawless before and now I'm regretting swapping my parts out. Still have to test it with the new parts, hopefully no issues there. It's really sad, it went from one of my favorite guns to a cautionary tale. |
|
Originally Posted By tranzformer: I am waiting patiently for the first company to come out with an aluminum Stribog lower that: takes Uzi or Colt magazines and takes AR grips/triggers/safety selectors. I know I’m not the only one waiting. Not really interested in the Scorpion magazine lowers. Yep, the Glock and Scorpion mag lowers do not interest me. |
Underscore was there before underscores were scary
Joined:
Jul 2010
Posts:
1919
EE: 100% (95)
AZ, USA
|
Originally Posted By N_Parker: Received my A3 recall/upgrade parts. Brand new pistol never fired. Wishing I had never sent in my parts now. I sent my roller in with the original bolt and locker and they didn't send it back. New bolt does not have any engraving like the original bolt. Surface finish and machining on the new locker looks like crap. https://imagizer.imageshack.com/v2/1280x1024q90/924/72VLcR.jpg How would you have done it differently? I see that there are two choices: send in the parts or send in the gun. Sitting here with an unfired A3 whose serial number is within the recall range. |
|
Originally Posted By Mr_Maim: @N_Parker How would you have done it differently? I see that there are two choices: send in the parts or send in the gun. Sitting here with an unfired A3 whose serial number is within the recall range. I'm in the same situation, wanting to see what others experience before I jump in. I know how the internet tends to magnify issues that only a few have experienced, but how many A3 owners have had the recall done and are happy with theirs? Anyone wish they had just kept the old parts and watch their receivers closely instead of doing the voluntary upgrade? . |
|
Originally Posted By Mr_Maim: @N_Parker How would you have done it differently? I see that there are two choices: send in the parts or send in the gun. Sitting here with an unfired A3 whose serial number is within the recall range. Originally Posted By Mr_Maim: Originally Posted By N_Parker: Received my A3 recall/upgrade parts. Brand new pistol never fired. Wishing I had never sent in my parts now. I sent my roller in with the original bolt and locker and they didn't send it back. New bolt does not have any engraving like the original bolt. Surface finish and machining on the new locker looks like crap. https://imagizer.imageshack.com/v2/1280x1024q90/924/72VLcR.jpg How would you have done it differently? I see that there are two choices: send in the parts or send in the gun. Sitting here with an unfired A3 whose serial number is within the recall range. 3rd Choice: Honesty I think I would have taken my lumps and and sold the pistol as received with the original parts and let the new owner make that decision. Global Ordnance FINALLY responded to my 3rd email after two + weeks noting my missing roller was in the mail. In that response Global Ordnance DID NOT comment about the condition of the new locker. Completely ignored the locker concerns addressed in the email with the same image below. I responded to their email asking them to address the locker concerns and crickets once again. Where will they be a year from now if that locker trashes out??? And if it does trash out, does it take the roller and bolt with it? Is there any guarantee the new parts won't crack or damage the receiver rails like some have reported? Still too many unknowns for me which takes me back to the first point above or 3rd choice, I would have sold it and let someone else make that decision about a $1k purchase.  |
Underscore was there before underscores were scary
Joined:
Jul 2010
Posts:
1920
EE: 100% (95)
AZ, USA
|
Damn. Thanks for the reply. Not what I wanted to hear. To clarify: you sent in your bolt, locking block, and locking block pin, and did not receive a locking block pin replacement? I have an A1. My son waited for and bought an A3 and now he is justifiably pissed off about the gun. |
Underscore was there before underscores were scary
Joined:
Jul 2010
Posts:
1921
EE: 100% (95)
AZ, USA
|
In other news. Has anyone tried one of these drums? https://www.gunbroker.com/item/886367160 Attached File Attached File |
|
Originally Posted By Mr_Maim: In other news. Has anyone tried one of these drums? https://www.gunbroker.com/item/886367160 https://www.AR15.Com/media/mediaFiles/248738/Stribog_Drum_1_jpg-1724235.JPG https://www.AR15.Com/media/mediaFiles/248738/Stribog_Drum_2_jpg-1724236.JPG Pass... I have had my own issues with F5 drums and others have reported issues as well on the FB page. |
|
Originally Posted By Snert: Are the gen 3's worth it? My FFL has 2 in stock gen 2's for $675. He has 10 gen 3's coming in next week. But the gen 3's are in the upper $900 price . Bothe the ven 2 and 3 are pistol, no brace. I have been looking at the stribog and the scorpion to do a SBR suppressor host. @Snert i have a gen 3 for sale in the EE with a brace and 5 new metal mags. If you're unable to find one. |
STRIBOG SP9A1, SP9A3, SP10A3, SP45A3 (Page 52 of 82)
Armory Sponsor