AR Sponsor
Official Mk12 Mod0, Mod1, ModH Photo and Discussion Thread (Page 1222 of 1226)
|
Originally Posted By AZ_SBR: Picked up an NXS 2.5-10x42 Mil-R that is basically new for $1,350 and now I have a functioning clone to shoot. https://live.staticflickr.com/65535/55132974596_54fd932e85_b.jpg Nice, looks great! |
|
anyone have experience with the linemount a1 replicas? Looks like they are using the more modern A2 polymer, and a full foam fill. Hopefully going to finally secure the lower I want for my mod 1 build; I want to use the shorter LOP A1 stock, and since colt CS stock's are hard to come by, wanted to see how the linemount compares linemount stocks They also make an A1 grip but I believe Ergo would be correct for a Mod 1 build as well? |
|
Originally Posted By Eyekahn: Was the mount on this rifle the OBR or PSR mount? https://www.ar15.com/media/mediaFiles/240977/IMG_4955-3725666.jpg |
https://www.amazon.com/Gentle-Propositions-J-S-Economos/dp/0615997635
Strength Determination Merciless Forever
Joined:
Oct 2009
Posts:
29936
EE: 100% (234)
PA, USA
|
Originally Posted By RTUtah: OBR, Clay. Originally Posted By RTUtah: Originally Posted By Eyekahn: Was the mount on this rifle the OBR or PSR mount? https://www.ar15.com/media/mediaFiles/240977/IMG_4955-3725666.jpg So does this mean the x50 is not for sale until next week? 
|
Joined:
Apr 2025
Posts:
611
EE: 100% (1)
USA
|
Anyone have a hook up on where I can buy an ACE Socom stock? I've been checking DoubleStar daily and finally snagged one when a new batch came out. Then they cancelled my order because I'm in Washington State. Makes zero sense. I've ordered complete uppers and triggers from Geissele, stocks, LPK, and many lower parts from from Midway, Palmetto State Armory, Rooftop Defense, Tombstone Tactical, and many others with zero issues. Many within weeks ago. This has never been an issue until now. I asked Doublestar what retailers sell the ACE stocks and they said it was some exclusive deal through them. |
|
Didn’t Washington ban parts sales? You might have trouble getting anybody to send you anything. Wet Worx has Gen 3’s @Rigley |
|
Originally Posted By Eyekahn: Depends on how I'm feeling lol. I really think it's a PSR after going all lance on the photo. Front ring looks lower than rear ring. Hm. Maybe I'm remembering it wrong. I thought for sure it was an OBR mount, tho. That might've been the Mod1 with the Leupold Mk5 on it, actually. 
|
https://www.amazon.com/Gentle-Propositions-J-S-Economos/dp/0615997635
|
Originally Posted By RTUtah: Hm. Maybe I'm remembering it wrong. I thought for sure it was an OBR mount, tho. That might've been the Mod1 with the Leupold Mk5 on it, actually. I've seen pictures with the Leupold IMS and Badger Ordnance COMM. I didn't notice any with a Mark 5HD on a Larue mount. |
|
Originally Posted By rbhoover: Haven't posted in here in a bit... the first of a few AEM5's have been approved. Only a few more to go https://i.imgur.com/cQxzOZQ.jpeg Which clip on is that? |
| That is a PVS-24. I think I have seen pictures of Mk12 variants with almost all of the issued Clip-Ons at some point (PVS-22/24/26/27/30 CNVD-LR) so if you want to stay 'clone correct' you don't seem to be limited to just one optic. I like the PVS-22 or 24 for this size of rifle, I'd probably throw the CNVD-LR on if it had a bit more optic on it. |
Strength Determination Merciless Forever
Joined:
Oct 2009
Posts:
29945
EE: 100% (234)
PA, USA
|
Originally Posted By Eyekahn: Where are all the big x50 NF mod 1's at??? I regret ditching the 50s Attached File Attached File |
|
Originally Posted By neight: I regret selling just about everything I let go. Originally Posted By neight: Originally Posted By Into_the_Void: I regret ditching the 50s I regret selling just about everything I let go. One reason why I hoard.
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By the-answer-is-42: Only thing i regret is selling my original knurled Ops 12th marked 12th model  But thats a long story.Originally Posted By the-answer-is-42: Originally Posted By neight: I regret selling just about everything I let go. Only thing i regret is selling my original knurled Ops 12th marked 12th model But thats a long story.That would hurt….. |
|
Originally Posted By Eyekahn: Mod 1 round 4 in the works. https://www.ar15.com/media/mediaFiles/240977/IMG_5022-3728042.jpg Going x50 in psr mount. https://www.ar15.com/media/mediaFiles/240977/IMG_4955-3725666.jpg I have a psr mount sitting on the shelf if you need one. x50 is a good time Attached File |
|
Originally Posted By Shlouf: I have a psr mount sitting on the shelf if you need one. x50 is a good time https://www.ar15.com/media/mediaFiles/223848/IMG_2780_jpeg-3728194.JPG Looks good. Thanks man. I got one off the hide. I appreciate it though. |
|
Originally Posted By Light1984: Does anybody have any experience with Bad Attitude department lowers? They have full custom A1 lowers available. Curious how these stack up to Int'l Milco if anyone has experience with both. I've been looking at some of their lowers, but haven't made the purchase yet. There was a Reddit post not too long ago stating that they're no longer producing the GM Hydramatic A1 lowers. Edit: I think there's a thread in the Retro section about BAD. A lot of good reviews from what I remember reading. |
|
Originally Posted By Light1984: Does anybody have any experience with Bad Attitude department lowers? They have full custom A1 lowers available. Curious how these stack up to Int'l Milco if anyone has experience with both. I would go BAD because F intlmilco for charging so much for a lower. |
| Yea, I don't really like the price for a stripped lower, but... int'l Milco is making roll marked lowers, versus BA being laser engraved. I want to do a Colt clone, but I'm not sure the best way to go about it other than finding someone with a Colt logo die. Was thinking Int'l Milco for a US Govt Property marked m16a1, then Etch the logo and address, but the price, oof. |
|
Originally Posted By AZ_SBR: GWOT vibes https://live.staticflickr.com/65535/55158798639_7b7e41266b_b.jpg Very choice 
|
|
if anyone is looking for a SS MK12 barrel BRD has the BA version for $79 with the ops shelf: https://blackrifledepot.com/ballistic-advantage-18-223-wylde-spr-stainless-steel-rifle-length-ar-15-barrel-premium-series-18-twist/ |
|
Originally Posted By neight: Looks like shipping is free too. Anybody had experience with these? I’ve read in other threads they’ve had severe QC failures the 'failures' are few and far in between. I have had several BA barrels that were easily MOA or under shooters. For $79 I dont think you can go wrong. I dont think any of these barrels will have something insane like a canted extension or wrongly-drilled gas port or anything else like that. |
USAF (Ret) 2003-2024
Joined:
Oct 2025
Posts:
136
EE: 100% (2)
CO, USA
Strength Determination Merciless Forever
Joined:
Oct 2009
Posts:
30113
EE: 100% (234)
PA, USA
|
Originally Posted By neight: Looks like shipping is free too. Anybody had experience with these? I’ve read in other threads they’ve had severe QC failures I had one in my Mod H. It would not shoot any better than 1.5" no matter what I fed it. The one saving grace is that it would group ball rounds just as well as match, so it was cheap to shoot. |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By the-answer-is-42: if anyone is looking for a SS MK12 barrel BRD has the BA version for $79 with the ops shelf: https://blackrifledepot.com/ballistic-advantage-18-223-wylde-spr-stainless-steel-rifle-length-ar-15-barrel-premium-series-18-twist/ BA ended up sending me this exact barrel after I had returned two others that were nitride finish, the two barrels shot well over 12" groups at 100 yards and damaged my AEM5. Thankfully Ron Allen was able to repair the damage. I posted a pretty in depth thread with pics a while back when it happened. This particular barrel shoots at MOA and for the price and BA's MOA guarantee, it's a pretty good deal. If it shoots like shit, just keep returning them until you get one that shoots to your approval. I have an extra upper/Lower/BCG that I've been looking to turn into something cheap and I just might jump on this deal. |
|
Originally Posted By AZ_SBR: Cloning has become a family affair for us. Our 24YO son stopped by to show off his completed Mod H. https://live.staticflickr.com/65535/55167566530_0a3724920e_b.jpg https://live.staticflickr.com/65535/55166282597_d38492417c_b.jpg 
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By Into_the_Void: https://www.ar15.com/media/mediaFiles/220444/1000013477_jpg-3735478.JPG What model of can is that on the bottom? |
|
Originally Posted By AZ_SBR: Cloning has become a family affair for us. Our 24YO son stopped by to show off his completed Mod H. https://live.staticflickr.com/65535/55167566530_0a3724920e_b.jpg https://live.staticflickr.com/65535/55166282597_d38492417c_b.jpg Buy your son a 4 pack of Rustoleum for Christmas @EyeKhan |
Strength Determination Merciless Forever
Joined:
Oct 2009
Posts:
30119
EE: 100% (234)
PA, USA
|
Originally Posted By LongTrang: What model of can is that on the bottom? Originally Posted By LongTrang: Originally Posted By Into_the_Void: https://www.ar15.com/media/mediaFiles/220444/1000013477_jpg-3735478.JPG What model of can is that on the bottom? Og turbo |
Official Mk12 Mod0, Mod1, ModH Photo and Discussion Thread (Page 1222 of 1226)
AR Sponsor