AR Sponsor
NSWDG/Delta/AFSOC Recce Clone Picture and Discussion Thread (Page 7 of 137)
|
Originally Posted By Infidel4life11: BAN HIM!!!!!!!!!  LOL  I wasn't sure if I should push it and post another sort of pre Navy SEAL recce :
Or who's got that one where there are 2 guys in the desert somewhere, one guy has an M4 barrel with the FSB cut off, round FF rail, carry handle cut off with a rail attached to it and a leupy 1-4 with the Gold ring on the front........ You guys know which one I'm talking about? |
Jesus came to comfort the afflicted and afflict the comfortable. - My Pastor
|
Originally Posted By JJREA: Noooooooooooooooo!!!!! I'll just die!!!!!! I wasn't sure if I should push it and post another sort of pre Navy SEAL recce :https://i.imgur.com/DrGlD6k.jpg Or who's got that one where there are 2 guys in the desert somewhere, one guy has an M4 barrel with the FSB cut off, round FF rail, carry handle cut off with a rail attached to it and a leupy 1-4 with the Gold ring on the front........ You guys know which one I'm talking about? 
I also really enjoy that rifle. I wish someone knew more details about the tube and can. Seems no one can ever pinpoint what exactly sawmans rig was. Unless you have any info on it? It’s obviously a super early seal Recce. Super early PRI tube with no holes? M41k? Looks like there might be a latch on the can. Can’t really tell. Looks shorter than an AEM5. |
|
Originally Posted By cdholmes:
Any Recces seen with riser rails like the PRI Recce rail? The delta rig in my original post is running the Larue 5/8 riser with that short dot. |
|
Originally Posted By JJREA: Noooooooooooooooo!!!!! I'll just die!!!!!! I wasn't sure if I should push it and post another sort of pre Navy SEAL recce :https://i.imgur.com/DrGlD6k.jpg Or who's got that one where there are 2 guys in the desert somewhere, one guy has an M4 barrel with the FSB cut off, round FF rail, carry handle cut off with a rail attached to it and a leupy 1-4 with the Gold ring on the front........ You guys know which one I'm talking about? 
Write up. http://soldiersystems.net/2015/09/12/gunfighter-moment-daryl-holland-10/ |
|
Originally Posted By Eyekahn: Talking about this one? https://i.imgur.com/bO3Dztf.jpg Write up. http://soldiersystems.net/2015/09/12/gunfighter-moment-daryl-holland-10/ http://i1085.photobucket.com/albums/j422/LRRPF52/Custom%20Projects/71f9b02f38da24a7b4cfed3700fb4bd1_zps9lmy9dhy.jpg ETA: https://www.ar15.com/forums/ar-15/-/127-717650/?r=-1&page=1 We have come a long way in the last twenty some odd years...but in some ways, the more things change the more they stay the same. |
|
Originally Posted By 44Echo10: I think it's this one... http://i1085.photobucket.com/albums/j422/LRRPF52/Custom%20Projects/71f9b02f38da24a7b4cfed3700fb4bd1_zps9lmy9dhy.jpg https://www.ar15.com/forums/ar-15/-/127-717650/?r=-1&page=1 It’s def got a free float tube. But doesn’t that Barrel look longer than 14.5? Interesting to know what riser it’s on. Edit: just read the post. Crazy they chopped the carry handle and tapped in leupold rings. That’s some serious thinking. |
|
Originally Posted By Eyekahn: Very cool. These super early one off rigs are sick. That holland rifle I posted and this. It’s def got a free float tube. But doesn’t that Barrel look longer than 14.5? Interesting to know what riser it’s on. Edit: just read the post. Crazy they chopped the carry handle and tapped in leupold rings. That’s some serious thinking. ETA; found 'em https://www.ar15.com/forums/AR-15/1980-s-Style-Flattop-Conversion-/123-728386/ https://www.ar15.com/forums/AR-15/Strange-prototype-upper-reciever/118-728671/ Flat top uppers didn't exist yet. Some forward thinking folks started putting Weaver rails on cut down carry handle uppers. |
|
Originally Posted By Eyekahn: Talking about this one? https://i.imgur.com/bO3Dztf.jpg Write up. http://soldiersystems.net/2015/09/12/gunfighter-moment-daryl-holland-10/  But yeah, this is the one I was mentioning. I think those guys are Navy and that would be a waaaaaay early "recce" type build. I'm guessing you could call it that. 
|
Jesus came to comfort the afflicted and afflict the comfortable. - My Pastor
|
Originally Posted By JJREA: I was trying to stay away from the Army builds, since you specifically called this a Navy SEAL recce thread. I do believe that is Daryll Holland and is Army... I think. Here's another pic and the consnesus is his rifle has a 16" barrel.... I think. Augee knows all this stuff better. https://i.imgur.com/SQbiUwE.jpg But yeah, this is the one I was mentioning. I think those guys are Navy and that would be a waaaaaay early "recce" type build. I'm guessing you could call it that. https://i.imgur.com/ZQuxTPC.jpg 
|
|
Ooo yeah.
|
http://www.amazon.com/Gentle-Propositions-J-S-Economos/dp/0615997635
|
|
Originally Posted By Eyekahn: I really enjoy sarcasm.
I also really enjoy that rifle. I wish someone knew more details about the tube and can. Seems no one can ever pinpoint what exactly sawmans rig was. Unless you have any info on it? It’s obviously a super early seal Recce. Super early PRI tube with no holes? M41k? Looks like there might be a latch on the can. Can’t really tell. Looks shorter than an AEM5. |
|
Originally Posted By Dobs013:
Well I got my mounting screws in for the T1. Now I just need the x24 buuuut that might take a minute
https://i.imgur.com/zv4Nx6F.jpg |
Without blood, it doesn't count!
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it."
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it."
|
Originally Posted By SecretSquirell:
Turd pin looks kinda large. Or is it an optical conclusion?  . Not really a fan of colt commercial lowers but my buddy wanted my Bushmaster to match his other so I got tired of getting asked every day and it's pretty much in unfired condition so I said screw it.
|
|
Originally Posted By Infidel4life11:
Can't decide on what stock! https://www.AR15.Com/media/mediaFiles/325471/2018-07-04_09_23_38-596634.jpg https://www.AR15.Com/media/mediaFiles/325471/2018-07-04_09_27_26-596641.jpg https://www.AR15.Com/media/mediaFiles/325471/2018-07-04_09_26_54-596639.jpg https://www.AR15.Com/media/mediaFiles/325471/2018-07-04_09_24_29-596640.jpg |
|
Originally Posted By Dobs013: No it's the sear block pin....it's an old colt preban lower. Prebans are all I can have where I am . Not really a fan of colt commercial lowers but my buddy wanted my Bushmaster to match his other so I got tired of getting asked every day and it's pretty much in unfired condition so I said screw it.Originally Posted By Dobs013: No it's the sear block pin....it's an old colt preban lower. Prebans are all I can have where I am . Not really a fan of colt commercial lowers but my buddy wanted my Bushmaster to match his other so I got tired of getting asked every day and it's pretty much in unfired condition so I said screw it.Originally Posted By Infidel4life11:
Can't decide on what stock! https://www.AR15.Com/media/mediaFiles/325471/2018-07-04_09_23_38-596634.jpg https://www.AR15.Com/media/mediaFiles/325471/2018-07-04_09_27_26-596641.jpg https://www.AR15.Com/media/mediaFiles/325471/2018-07-04_09_26_54-596639.jpg https://www.AR15.Com/media/mediaFiles/325471/2018-07-04_09_24_29-596640.jpg |
Without blood, it doesn't count!
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it."
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it."
|
Originally Posted By Infidel4life11:
Can't decide on what stock! https://www.AR15.Com/media/mediaFiles/325471/2018-07-04_09_23_38-596634.jpg https://www.AR15.Com/media/mediaFiles/325471/2018-07-04_09_27_26-596641.jpg https://www.AR15.Com/media/mediaFiles/325471/2018-07-04_09_26_54-596639.jpg https://www.AR15.Com/media/mediaFiles/325471/2018-07-04_09_24_29-596640.jpg |
Proverbs 14:4
|
Originally Posted By 56cbr600rr:
This is my starting point, deciding on barrel now. http://i31.photobucket.com/albums/c361/blklexus74/7FE6A35A-AB73-4CDB-9DF9-25D92B1EF170.png Think I know the answer, but is a sure fire RC1 ever been seen on a recce? |
|
Did not know that. It is currently sitting on a 416; however would like to go the Colt route. And probably a 16 inch barrel. Originally Posted By Dobs013:
Damn good starting point! I think the RC1 has only been used on the 416 recce platform. Originally Posted By Dobs013:
Originally Posted By 56cbr600rr:
This is my starting point, deciding on barrel now. http://i31.photobucket.com/albums/c361/blklexus74/7FE6A35A-AB73-4CDB-9DF9-25D92B1EF170.png Think I know the answer, but is a sure fire RC1 ever been seen on a recce? |
|
Originally Posted By 56cbr600rr:
Did not know that. It is currently sitting on a 416; however would like to go the Colt route. And probably a 16 inch barrel. |
|
Originally Posted By 56cbr600rr:
This is my starting point, deciding on barrel now. http://i31.photobucket.com/albums/c361/blklexus74/7FE6A35A-AB73-4CDB-9DF9-25D92B1EF170.png Think I know the answer, but is a sure fire RC1 ever been seen on a recce? |
|
Originally Posted By Infidel4life11:
Can't decide on what stock! https://www.AR15.Com/media/mediaFiles/325471/2018-07-04_09_23_38-596634.jpg https://www.AR15.Com/media/mediaFiles/325471/2018-07-04_09_27_26-596641.jpg https://www.AR15.Com/media/mediaFiles/325471/2018-07-04_09_26_54-596639.jpg https://www.AR15.Com/media/mediaFiles/325471/2018-07-04_09_24_29-596640.jpg
SOPMOD looks more legit. I personally don't like the angled head thing though..... But to me the only good stock for shooting is an A1. But it's not the handiest. And makes it look like a Mk12 wannabe. And add's weight. |
Jesus came to comfort the afflicted and afflict the comfortable. - My Pastor
|
I like that a lot. Pricey little joker though!
Originally Posted By MS556: Get the Lilja M4 Navy 16" SEAL barrel. 416 stainless. Wylde chamber. 1:8 twist. Hand lapped. Air gauged to .0002" uniformity its entire length. Authentic per NSWC Crane specs and eerie, spooky accurate - sub 1/2 MOA with match component ammo and good technique. |
|
Originally Posted By 56cbr600rr:
Which handguard would go best?
|
|
That’s what I thought. Cool. Thanks for the info!
Will have some loot soon! Selling my SCAR 17. And looking for parts! Originally Posted By Dobs013: Only 2 options, long or medium length KAC ff Ras. M4 match ff Ras or the old Vero marked medium's are the ones you really want if you're going for markings but those are Uber hard to find and you have to pay out the ass when you find them. I won't say how I know that |
|
Originally Posted By 56cbr600rr:
That’s what I thought. Cool. Thanks for the info! Will have some loot soon! Selling my SCAR 17. And looking for parts! |
|
Originally Posted By 56cbr600rr:
This is my starting point, deciding on barrel now. http://i31.photobucket.com/albums/c361/blklexus74/7FE6A35A-AB73-4CDB-9DF9-25D92B1EF170.png Think I know the answer, but is a sure fire RC1 ever been seen on a recce? Attached File |
NSWDG/Delta/AFSOC Recce Clone Picture and Discussion Thread (Page 7 of 137)
AR Sponsor