User Panel
|
|
Originally Posted By CMCctx: Long shot, but does anyone have a line on an A.R.M.S. #22m68? https://i.postimg.cc/6Q75g9nJ/PXL-20210105-160254652-2.jpg View Quote I think I do. I'll check when I get home. |
|
|
Originally Posted By 5pt56: As most of you probably know, I don't typically sell my clone uppers, especially ones as perfect as this but I couldn't be more excited to let this one go to a good home. It's been a long search but I finally have my final Vero Beach marked RAS (MRE) handguard to complete my set. Here are the departing pics of this upper before it heads to the chopping block. https://i.imgur.com/LKISsXx.jpg https://i.imgur.com/E4ksOeN.jpg https://i.imgur.com/cggDZNZ.jpg https://i.imgur.com/8OEPUEP.jpg View Quote Congrats on the find! I'll be in my bunk. Before you let it go, can you confirm whether or not an ACOG will mate up to that Larue mount? |
|
|
Attached File
Took the colt with the ACOG and MRE out to the range for a little therapy. She did beautiful. And tripod shooting is now the only way I can go. Hopefully gonna set it up for an AEM-5 when I can find mounts. Rang some steel out to 300 with it stupid easy. Also, someone talk me out of selling my URX ii. I really don’t want to but I have 2 10.5’s I love shooting and don’t know if I can talk myself into another short barrel .223/556 |
|
|
Originally Posted By Infidel4life11: I do. Mounted on top of this https://www.AR15.Com/media/mediaFiles/325471/431D2C7D-D7E8-4424-BB3B-0759D6D23651-1538545.jpg View Quote View All Quotes View All Quotes Originally Posted By Infidel4life11: Originally Posted By CMCctx: Long shot, but does anyone have a line on an A.R.M.S. #22m68? https://i.postimg.cc/6Q75g9nJ/PXL-20210105-160254652-2.jpg I do. Mounted on top of this https://www.AR15.Com/media/mediaFiles/325471/431D2C7D-D7E8-4424-BB3B-0759D6D23651-1538545.jpg IRENE! |
|
Without blood, it doesn't count!
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it." |
Originally Posted By 3one5: Painting rifles and beard trimming should both be done while drinking View Quote View All Quotes View All Quotes Originally Posted By 3one5: Originally Posted By rbutcher: The part about being drunk when you paint your rifle... this is the way. Painting rifles and beard trimming should both be done while drinking The fuck is this heresy? |
|
Without blood, it doesn't count!
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it." |
Sent Ron measurements for the m4 ops 12th collar the other day.
Is there anything i should know about installing it? I know they're tight, but how tight? Like thermofit or just wiggle on? |
|
|
|
Originally Posted By Ed_Victory: I've yet to see anyone piece together the Duostock Mk12. https://i.imgur.com/TrxhU8r.jpg I need to dig mine out of the parts bin and do something weird with it. View Quote View All Quotes View All Quotes Originally Posted By Ed_Victory: Originally Posted By Dyzastr: I really need to do a mk12 build. I've put it off for a while now. 2021 is the right time. I've yet to see anyone piece together the Duostock Mk12. https://i.imgur.com/TrxhU8r.jpg I need to dig mine out of the parts bin and do something weird with it. |
|
Who said that?
|
|
|
|
Strength Determination Merciless Forever
PA, USA
|
Originally Posted By Hydra-shokz: It was about an hour or so for me. I'm in the Doylestown area. I liked that range. Maybe I'll join again one day when I have more time. Didn't they go out to 600? View Quote View All Quotes View All Quotes Originally Posted By Hydra-shokz: Originally Posted By SDMF_Rebel: I'm twenty minutes away. I go there and another range that's ten minutes away It was about an hour or so for me. I'm in the Doylestown area. I liked that range. Maybe I'll join again one day when I have more time. Didn't they go out to 600? Yes, it's 600. However, the township pitched a fit over "unauthorized expansion" and made them get rid of all steel past 400. They are currently battling it out with them. |
|
Originally Posted By Outrider: I'm steering more towards less rifles in the collection overall but full decked out. Quality over quantity. I used to have so many half ass projects and stuff that constantly got built, torn down, etc without ever being shot. There's plenty of other configurations I'd like to own but I've come to realize that they won't get shot or used. I'm not a collector type so I rather have a super fine optic on one rifle than 2-3 rifles with no or cheaper optics. Just my personal preference these days. View Quote Totally agree. 2 5.56 rifles. Recce/SPR and a CQB rifle. Just need to add a 6.5 creedmoor for 1000+ Yards. |
|
|
|
They call me "The Plug".
Looking a Gen 1 PRI Gas buster charging handle. |
|
|
Originally Posted By 5pt56: @New2AR15s you're too late. saw it get sold already. I also didn't speak up quick enough. View Quote View All Quotes View All Quotes Originally Posted By 5pt56: Originally Posted By New2AR15s: Interested @rbutcher @New2AR15s you're too late. saw it get sold already. I also didn't speak up quick enough. Figured it would have gone fast but you never know. Working on trying to find a RIS II M4A1 rail too for a reasonable price. There were a ton on the EE in the fall but not much lately |
|
|
Strength Determination Merciless Forever
PA, USA
|
|
|
Originally Posted By SDMF_Rebel: A week into the year and I'm not sure I can top this. https://www.AR15.Com/media/mediaFiles/220444/20210107_131335_jpg-1768534.JPG View Quote Where’d you find the URX? Been looking for a minute now. |
|
|
Strength Determination Merciless Forever
PA, USA
|
Originally Posted By Dobs013: Where’d you find the URX? Been looking for a minute now. View Quote View All Quotes View All Quotes Originally Posted By Dobs013: Originally Posted By SDMF_Rebel: A week into the year and I'm not sure I can top this. https://www.AR15.Com/media/mediaFiles/220444/20210107_131335_jpg-1768534.JPG Where’d you find the URX? Been looking for a minute now. EE URX + DD 11.5 barrel, BCG, CH, Colt Upper.... $950.... |
|
|
Originally Posted By New2AR15s: Figured it would have gone fast but you never know. Working on trying to find a RIS II M4A1 rail too for a reasonable price. There were a ton on the EE in the fall but not much lately View Quote View All Quotes View All Quotes Originally Posted By New2AR15s: Originally Posted By 5pt56: Originally Posted By New2AR15s: Interested @rbutcher @New2AR15s you're too late. saw it get sold already. I also didn't speak up quick enough. Figured it would have gone fast but you never know. Working on trying to find a RIS II M4A1 rail too for a reasonable price. There were a ton on the EE in the fall but not much lately Yeah honestly it went really fast. Hoping it gets a good GWOT home. |
|
|
|
Has anyone done a x39? Opinions all over the board. I'm thinking of swapping one of mine because I have a ton of x39 stashed away
|
|
|
Strength Determination Merciless Forever
PA, USA
|
This urx upper is really light. I threw an acog on it and it is ridiculous. I'll see how I like it at the range tomorrow.
|
|
|
Originally Posted By CMCctx: Has anyone done a x39? Opinions all over the board. I'm thinking of swapping one of mine because I have a ton of x39 stashed away View Quote @CMCctx I'll add that to my pictures I'm gonna post for ya...give me a bit and I'll get em'. Whoever if was that said something about the acog was correct tho on eye relief at that mounting position on the Larue riser... |
|
They call me "The Plug".
Looking a Gen 1 PRI Gas buster charging handle. |
Originally Posted By 5pt56: @CMCctx I'll add that to my pictures I'm gonna post for ya...give me a bit and I'll get em'. Whoever if was that said something about the acog was correct tho on eye relief at that mounting position on the Larue riser... View Quote Even if you mount it all the way back? It's splitting hairs with the amount of height it would give, I understand that. For me the ACOG is just a little low, but not 0.5" riser low. My KAC tri-mount is 0.43" and just fine, but options never hurt anyone! |
|
|
|
Originally Posted By 3one5: When it starts getting stuck in the chest strap of the seat belt I have to take a little off the bottom. View Quote View All Quotes View All Quotes Originally Posted By 3one5: Originally Posted By SecretSquirell: The fuck is this heresy? When it starts getting stuck in the chest strap of the seat belt I have to take a little off the bottom. Don't wear a seat belt, the beard will save you. Mine goes down to the top of my stomach. Fire and getting it caught on things at work keep it at it's current length. |
|
Without blood, it doesn't count!
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it." |
1.125" rings came in today. Most all of my sticks have FSB on them so optics are at least 1.50" with most higher. I'm not hating the lower profile with no fixed sights to contend with.
Is this what the light looks like? |
|
|
Strength Determination Merciless Forever
PA, USA
|
Originally Posted By CMCctx: 1.125" rings came in today. Most all of my sticks have FSB on them so optics are at least 1.50" with most higher. I'm not hating the lower profile with no fixed sights to contend with. Is this what the light looks like? View Quote Height is so user dependent. I literally cannot get my head low enough for anything under 1.25. I also cannot wear muffs and get a weld. I have a huge fucking head |
|
I hate USPS...my sling clip is 20 miles away yesterday then 3 hours later scans into the distribution center in Detroit. So 20 miles from my house it goes half way across the country
|
|
|
Originally Posted By Dobs013: I hate USPS...my sling clip is 20 miles away yesterday then 3 hours later scans into the distribution center in Detroit. So 20 miles from my house it goes half way across the country View Quote I've still got a part from Brownells "en route"................since June. |
|
Without blood, it doesn't count!
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it." |
Originally Posted By CMCctx: 1.125" rings came in today. Most all of my sticks have FSB on them so optics are at least 1.50" with most higher. I'm not hating the lower profile with no fixed sights to contend with. Is this what the light looks like? View Quote I run 1.93 or higher on every one of my modern rifles. Hell, I have a lower 1/3 mount on top of my AK Dogleg rail. I can feel it being a tough transition to the 1.375 rings when I’d normally have the optic up where the piggyback is. |
|
|
|
Originally Posted By Dobs013: They got one job! Literally something they train pigeons to do View Quote View All Quotes View All Quotes Originally Posted By Dobs013: Originally Posted By SecretSquirell: I've still got a part from Brownells "en route"................since June. They got one job! Literally something they train pigeons to do Yeah, they're a bunch of clown shoes right now. Brownells was awesome, after a couple weeks of it not moving I emailed them and they sent out a replacement and I got it a couple days later. |
|
Without blood, it doesn't count!
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it." |
Originally Posted By SDMF_Rebel: Height is so user dependent. I literally cannot get my head low enough for anything under 1.25. I also cannot wear muffs and get a weld. I have a huge fucking head View Quote Bro me too. I've been playing with it and I'm just going to slap them on the #45M tomorrow |
|
|
Strength Determination Merciless Forever
PA, USA
|
Originally Posted By Dobs013: They got one job! Literally something they train pigeons to do View Quote View All Quotes View All Quotes Originally Posted By Dobs013: Originally Posted By SecretSquirell: I've still got a part from Brownells "en route"................since June. They got one job! Literally something they train pigeons to do I should have walked the arms rail to you |
|
|
Who said that?
|
20210108_213628 by brandon hobock, on Flickr" />
20210108_213008 by brandon hobock, on Flickr" /> A solid start to a sweet build |
|
|
New mount that gets the MRDS mount pretty low. Didn’t even think about it but having it mounted behind the turret blocked the auto adjust sensor. Unfortunately I had to mount it in the front to even see my dot.
Attached File |
|
|
Originally Posted By Dyzastr: @CMCctx I can take a pic of that riser for you quick. It's the larue lt110. There is a step up at the back that pushes the acog forward. So even if it fit, which also depends on the mount you are running, it would still push the acog close to an inch forward. Those eotechs I mentioned are about all that play nicely with that riser. So even if you were to have an acog mount that mounted up properly to the lt110, and if you were to run them without a rear buis, the acog would still end up further forward away from your eye. The lt101 has more universal mounting ability, but it is a 5/8' riser. (top image courtesy of larue) https://i.imgur.com/wytPR8i.jpg https://i.imgur.com/7YucuXO.jpg View Quote unless you mount the riser backwards...lol... Edit: I still agree with you 100%. Hahaha. Tomorrow is picture day finally, regardless... |
|
They call me "The Plug".
Looking a Gen 1 PRI Gas buster charging handle. |
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.