Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
Armory Sponsor
4/11/2009 8:35:41 AM EDT
If the link is dead, it's dead.  I'll try to get it fixed later.


For The Beginning Hand Loader: FAQ's for Beginners - By FB41

Reloading Tutorials by Manufacturers and the NRMA: >>>>>>

A Reloading Tutorial With a Few Twists at www.rifle-company.com: >>>>>>

On Line Videos for Beginning Reloaders: >>>>>>

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––-
Reloading .223 Rem - Tutorial Part 1 - Sorting and Tumbling: >>>>>

Reloading .223 Remington - Tutorial Part 2 - Lubing and Sizing: >>>>>

Reloading .223 Remington - Tutorial Part 3 - Primer Pocket Prep and Trimming: >>>>>

Reloading .223 Remington - Tutorial Part 4 - Priming, Dropping Powder, & Seating Bullets: >>>>>

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––-

Removing a Stuck Case From a Sizing Die : >>>>>

So, You Want to Load Wolf Steel Cases : >>>>>

Pulling Bullets with a Kinetic Bullet Puller :>>>>>

Loading 7.62X39 Ammunition: >>>>>

Decrimping Primer Pockets In .223 Remington Brass: >>>>>>

Don't Crowd Cartridge Case Trim Length: >>>>>

How to Adjust a Possum Hollow Kwick Case Trimmer: >>>>>

Reloading with the LEE Classic Loader: >>>>>

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
How to Compute Bullet RPM

RPM=Revolutions/minute = [Bullet Speed (ft/sec) X 12 (in/ft) X 60 (sec/min)] / [Rifling Twist (Revolution/inch]

= [Bullet Speed]X[720] / [Rifling Twist] Rev/min

Example: Bullet Speed = 2700 ft/sec, Rifling Twist = 1 turn in 7 inches

Bullet RPM = 2700(720)/7 = 277 714 revs per minute !!
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

How to Make .224 Diameter Bullets From .22 LR Brass: >>>>>>
(Photos were removed from the remote server.)

Sign up to continue the discussion

Create a free account to share your thoughts, follow topics, and connect with the AR15.COM community.

Already a member? Sign In

Armory Sponsor