Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
Armory Sponsor
4/14/2010 9:15:24 PM EDT







Barrel is 13.25" long with a 3" muzzle brake. Total barrel length measured from the end of the muzzle brake to the breech face is 16.25". I think the next one I do I will cut the barrel as short as I can get it.

 
4/14/2010 9:21:51 PM EDT
[#1]
Interesting....personally I like the PSL barrel as is. That shorty would go well with a 20rd mag.
4/14/2010 9:24:43 PM EDT
[#2]





Quoted:



Interesting....personally I like the PSL barrel as is. That shorty would go well with a 20rd mag.



If 20 round mags were available......It's going to feel like the ban days all over again. Oh, and there's WAY too many PSLs with wasted metal hanging off the end out there.





 
4/15/2010 3:48:51 AM EDT
[#3]
Now that is pretty frickin cool........

Where'd you get the Tabuk style flash suppressor, and how well does it work?
4/15/2010 4:06:03 AM EDT
[#4]
That, sir, is pure awesomeness.

I will take a guess that it is a Nodakspud flash hider.
4/15/2010 7:32:44 AM EDT
[#5]
Looks good, but I bet that stock is very uncomfortable in that caliber/configuration.
4/15/2010 10:00:57 AM EDT
[#6]
Pretty cool. A micro SPR/DMR. The short barrel probably actually helps accuracy...Alot less barrel whip.
4/15/2010 11:01:00 AM EDT
[#7]
Did you build this, or did you ship it somewhere....?
4/15/2010 11:03:18 AM EDT
[#8]



Quoted:


Did you build this, or did you ship it somewhere....?


I built it



 
4/15/2010 11:44:35 AM EDT
[#9]
I like it!! Great job on the build.
4/15/2010 11:57:36 AM EDT
[#10]
Nice but I bet that stock is a bitch after a few rounds.

Give me that with a "normal" ak stock and you've got 100% pure win
4/15/2010 12:53:13 PM EDT
[#11]
Neat rifle, and probably good for a tactical niche of 0-500 meters, which 400 meters farther than the average guy on this site.

What kind of glass are you going to mount on it?  The only issue would be that I've heard PSLs really like light bullets (<150 grs.) so that would impact your selection.
4/15/2010 6:40:47 PM EDT
[#12]
Sweeeet.  Wish there were 54r hi-cap mags.



Did you use a cut down psl gas tube or is that an AK tube?

How about the lower handguard, is that a regular lower hg retainer or how'd you do it?  

Drilling a gas port not too hard?
4/15/2010 6:50:47 PM EDT
[#13]



Quoted:


Sweeeet.  Wish there were 54r hi-cap mags.



Did you use a cut down psl gas tube or is that an AK tube?

How about the lower handguard, is that a regular lower hg retainer or how'd you do it?  

Drilling a gas port not too hard?


Pretty much everything had to be fitted to work. Those are standard AK handguards from K-Var. The gas tube is Romanian and was fitted to the PSL, I moved the gas block back so it fit with the piston and then drilled and pinned it, then fit the gas tube to that. Gas port is drilled at a 45 degree angle but is MUCH smaller than a standard AK gas port.



 
4/15/2010 7:40:05 PM EDT
[#14]
why? whats the point?
4/15/2010 7:55:16 PM EDT
[#15]



Quoted:


why? whats the point?


Honestly, I did it on a dare. But there's so many PSL's floating around and I wanted to do something that REALLY wailed.....this is it. I guess I don't have to worry about barrel whip anymore though.



 
4/15/2010 8:03:30 PM EDT
[#16]
Quoted:
why? whats the point?


Are you kidding... that thing is fucking amazing!
4/15/2010 8:08:24 PM EDT
[#17]



Quoted:


why? whats the point?


Because I have a small penis? Does that satisfy your request for a reason? How about....umm.....because I felt like it? Sorry, don't want to sound like a dick or anything, in fact, it usually pisses me off when people stray from the original design of a firearm but this was one of those "I wonder if I can do this" type things.



 
4/15/2010 8:41:42 PM EDT
[#18]
Quoted:
http://i37.photobucket.com/albums/e68/MattStoner/WedApr14211938AmericaLos_Angeles201.jpg

Barrel is 13.25" long with a 3" muzzle brake. Total barrel length measured from the end of the muzzle brake to the breech face is 16.25". I think the next one I do I will cut the barrel as short as I can get it.  


Haha, I love it. That has got to have a satisfying report, and a healthy muzzle flash.
4/16/2010 12:43:39 AM EDT
[#19]
Quoted:
Nice but I bet that stock is a bitch after a few rounds.

Give me that with a "normal" ak stock and you've got 100% pure win

Damn you NBR!

I so need one of these now... will go with the "normal" stock though.

..something to keep the short FAL company.

4/16/2010 2:26:56 AM EDT
[#20]
WIN!

That is cool!
4/16/2010 3:53:13 AM EDT
[#21]
That is cool!!
So when will you start shipping these, and what's the projeced cost?
4/16/2010 4:42:20 AM EDT
[#22]
Quoted:
Pretty cool. A micro SPR/DMR. The short barrel probably actually helps accuracy...Alot less barrel whip.


And hinders effective range.
4/16/2010 8:02:02 AM EDT
[#23]
Fireballmaker.
4/16/2010 8:16:24 AM EDT
[#24]
Quoted:
Quoted:
Pretty cool. A micro SPR/DMR. The short barrel probably actually helps accuracy...Alot less barrel whip.


And hinders effective range.


Because the PSL uses the effective range of the caliber so effectively?

I would guess there aren't many PSL's capable of acceptable accuracy past 400 yards..
4/16/2010 8:24:58 AM EDT
[#25]



Quoted:


That is cool!!


So when will you start shipping these, and what's the projeced cost?


I still got some bugs to work out so they are 100% reliable, but cost would have to be about $1200 to make it worth my while, I think.



 
4/16/2010 10:36:20 AM EDT
[#26]
Quoted:
Fireballmaker.


I would guarantee that!


4/16/2010 11:20:16 AM EDT
[#27]
I don't know why, but I like it!    
4/16/2010 11:26:22 AM EDT
[#28]
Needs wood...
4/16/2010 11:42:36 AM EDT
[#29]
That wire stock is going to beet the shit out of you. I see a slip on rubber pad in your future!
4/16/2010 5:58:16 PM EDT
[#30]
Quoted:
Quoted:
Quoted:
Pretty cool. A micro SPR/DMR. The short barrel probably actually helps accuracy...Alot less barrel whip.


And hinders effective range.


Because the PSL uses the effective range of the caliber so effectively?

I would guess there aren't many PSL's capable of acceptable accuracy past 400 yards..


+1 The round is capable much farther out than even an original PSL is capable of. I'd be curious of what that could do with the stiffer barrel, a trigger job and hand-loaded ammo when sandbagged....
4/16/2010 7:12:02 PM EDT
[#31]
I was going to use wood furniture but the modifications that needed to be done are much easier to do on the plastic stuff. The recoil isn't that bad, at least it isn't bad when you're more worried about getting your hearing back....it's obnoxiously loud. I am currently hunting for some Yugo M92 parts (front sight/gas block combo, gas tube, hinge and top cover and under folder stock and trunnion) for my next PSL build.

4/19/2010 9:05:48 PM EDT
[#32]
So I went to the gun show this weekend and picked up a 220 round 30cal ammo can of 54r. When I got to the range, I had a PSL mag with 10 rounds in it and the ammo can. I opened the ammo can (for the first time since I bought it) and it was 8mm Mauser. I am EXTREMELY pissed. Anyways, I fired 5 rounds, then just as I was finishing up the 10 rounds I had, I remembered to take a video. Here's the last few rounds being fired through the mag:





PSL

 
4/19/2010 9:24:35 PM EDT
[#33]
Quoted:PSL


Wow, whats the velocity on those ejected cases?  The regular PSL I have shot launch the empties about 20 feet into the air.  Yours look like they are trying to take out your camera man.
4/19/2010 9:40:19 PM EDT
[#34]



Quoted:



Quoted:PSL




Wow, whats the velocity on those ejected cases?
 The regular PSL I have shot launch the empties about 20 feet into the air.  Yours look like they are trying to take out your camera man.



Yeah, it's about as bad as my G3, launches the a mile!



 

Sign up to continue the discussion

Create a free account to share your thoughts, follow topics, and connect with the AR15.COM community.

Already a member? Sign In

Armory Sponsor