AR Sponsor
Posted: 6/13/2007 3:15:02 PM EDT
Well this first complete build and was designed to be for QCB only. I was figuring 25-100 yards. I started this back in January 2007 and it has not always gone according to plan but in the end it was worth it. Now I just need to get it to the range.  Next will be a suppressor that is already in progress. ETA: PICS (SUPPRESSOR IS HERE!) All parts were bought from the vendors here including Rainier Arms, BravoCompany, Denny's Guns, SKD, Jtac Supply, BigDawg Tactical, etc.       Range report at 25 yards with the can attached. It was too early in the morning and the sun doesn't hit the targets at 100 yards so I wouldn't be able to see it that far out without other optics. I was however taking out the steel plate that was about 7" square at 100 yards since it was painted orange. Pretty good for a 4MOA Aimpoint   POF Gen I Lower RRA Lower Parts Kit RRA N/M Trigger Vltor Stock H2 Buffer VIS2 Receiver Novekse 10.5" Barrel w/ pinned gas block Denny's Super Duty M16 ION Bonded BCG Gas Buster CH Troy Front and Rear BUIS KNS GenI Pins Hogue Grip Magpul Trigger Guard Aimpoint ML3 4MOA/LT-150 AAC M4-2000 Mod 07 Daniel Defense Rear Receiver QD Daniel Defense Rail Mount QD Vickers Tactical VCAS-PB Sling Total Build Cost - $4200.00 Look on NJ Residents faces at the PA rifle range - Priceless 
|
|
NicehatNever mind re-read your post (carbine). How much did you put into it? |
This has been a lone time coming! That turned out sweet. Where are the optics? I hope you are not waiting on them now. Anyway, mine was first so YOU are the copy cat.  Nice job! Now shoot the shit out of it.
|
| AAC M4-2000 mod 07. I have to wait for my paperwork to be re-done since my C3 dealer closed shop to civilians and is only doing LEO and Gov work now. Allen from Polite Society is waiting for the re-transfer to come back from the ATF. Who knows when that will come back. |
|
Very nice looking blaster. I gotta say that while we all know that close fit upper to lower deally has no affect on the AR's function or accuracy, I love doing builds witht e POF lower and the VIS or Larue Stealth uppers. When assembled they make the AR feel like a monolithic gun, no upper no lower wiggle, rattle, nada. Range report? |
|
I got an Aimpoint ML3 4MOA and at 25 yards (where I have it zeroed for) I can shoot the center out of the targets all day long. 50 yards it will shoot about 2" high but I can still get a decent grouping. 100 yards I have to put the top of the dot on the target's center mass. I was still able to shoot about a 4-5" group. For me that was pretty damn good for a ML3-4MOA. I was shooting at a steel gong (9"x9" roughly) banging that thing all day long. I was shooting all Federal AE 55g and not one problem with the rifle. It worked perfect. I only put about 150 rounds through it so far. Unfortunately I was having so much fun with the Aimpoint that I keep forgetting to sight in the backup sights.
|
Glad I am not the only one who has done that. Go to the range to zero irons, get home, remember that I fogot to do it 
|
|
The POF is top notch. I only had one problem with the lower and that was getting the magpul trigger guard to fit. the hole in the trigger guard was off by like 1/2 a mm. I actually had to dremmel out the trigger guard hole in order to get the pin in. I don't know if it was the trigger guard or the lower, either way it is on now. |
I was actually surprised how well the setup was shooting with the suppressor on. At first I thought the groups would open up, but it seems like they may have tightened up a bit. The Noveske Barrel is the shiz-nit too. One of these days if I go to the range after work I will try for best groupings at 100 yards. The sun hits the targets between 2-5pm since the range is basically in a valley of a mountain. I know the rifle can shoot better than I can. I can always put my 3.5x15 Nightforce on, but that would be cheating - wouldn't it? I couldn't be happier with this setup! One note: I took a few of the NHMTG 20round mags that I recently bought new with the black plastic follower. They would not fit in my lower. I had to use a D&H 30 round mag. |
You just spent $300 on a Lifetime Membership and don't want to spend $200 for a cool toy.
cut the guy a break! prioritys!, ARF.com shall birth his toys I'm in love with the VLTOR/POF marriage, my first build is almost complete; and it as well sports this holy grail of a combination 
|
All the instructions for filling out Form1 say to send a check or money order. If they took Discover, like here, I'd probably have one. 
|
All I have of that one for now. I did a DD rear sling plate and a rail qd w/ a sling but no pictures. Still waiting on LT to make a throw lever tango down vertical grip. |
AR Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter