AR Sponsor
Posted: 2/22/2011 2:48:36 PM EDT
[Last Edit: Zhukov][Edited]
RULES FOR THIS THREAD:
unless your post follows the rules outlined above. I will be very irate and I'm warming up the "warn" button in case anyone decides to go off-topic. |
Daddy loves you. Now go away.
Originally Posted By PAEBR332: Congratulations. This post has a created a stupidity event horizon from which no logic, reason or science will ever escape.
Originally Posted By PAEBR332: Congratulations. This post has a created a stupidity event horizon from which no logic, reason or science will ever escape.
|
Summary for pages 1 & 2: AR15fan - CompM, LED burned out after 8 years. Bayer - ML2, bad rotary switch. sully3acr - T1 with fogged lens. iiibdsiii - Used M2, shut off under recoil 62 total page 2 50 page 1 4 problems out of 112 sights = 3.6% |
Daddy loves you. Now go away.
Originally Posted By PAEBR332: Congratulations. This post has a created a stupidity event horizon from which no logic, reason or science will ever escape.
Originally Posted By PAEBR332: Congratulations. This post has a created a stupidity event horizon from which no logic, reason or science will ever escape.
|
I have a Comp-ML that I bought when the Comp-M2 first came out, when ever that was. I have shot many many many IPSC matches with it in those years. I have had zero problems with it. ETA: I have an M3 2MOA, an M3 4MOA and two M2 Aimpoints. All of these were bought used in excellent condition and they work perfectly. My HD M4 has an M2 which I never turn off. Sold the M3 and bought a T2. Update: Traded for a friends Comp4s a few months back. Still no issues. I currently have a T2 and a Comp M4s Daughter has PRO Son has Comp M2 Bill |
Happiness is a warm gun,
Bang bang, shoot shoot.
The Beatles
Nov. 1968
Bang bang, shoot shoot.
The Beatles
Nov. 1968
|
I've owned 3 Aimpoints.
ML3 - purchased around 2005/6 T-1 - purchased 2010 M4s - purchased 2009 No problems with any of them, amidst heavy use. |
It's hard not to be a menace to society when half the population is happy on their knees.
| I currently have a Comp M2 that I purchased in 2007 therabouts and have never had a problem with it. Lots of three gun matches and never a hitch. |
Membership thanks to the generosity of MDW
Life is hard; It's harder when you're stupid - CH Maj Powell (dad)
It is not spouse abuse if you like it - same
Life is hard; It's harder when you're stupid - CH Maj Powell (dad)
It is not spouse abuse if you like it - same
|
I have a Comp M that I purchased new... probably in 1996 or thereabouts. It worked great for years, but now the dot blinks on and off like there's a loose wire inside. One might be inclined to say "yeah but... 17 years of service..." which is true, but it's been pretty light use, nothing like it would have seen in a military or law enforcement role. I was told it had a lifetime warranty... I will have to see how that works.
|
...While they are saying, "Peace and safety!" then destruction will come upon them suddenly like labor pains upon a woman with child, and they will not escape.
|
Originally Posted By Zhukov: RULES FOR THIS THREAD:
I do currently own: 1 M2 circa 2002 1 M3 circa 2006 1 M3 circa 2010 1 T1 circa 2010 No problems. I have previously owned: 1 M3 circa ~2007 1 T1 circa ~2009 Neither had issues. |
The legend.
Hates teh tape switch.
Hates teh tape switch.
Just a Big Hairy American Winning Machine
Joined:
Jan 2006
Posts:
2933
EE: 100% (22)
|
"The Angel of Death has been abroad throughout the land; you may almost hear the beating of his wings"
"Flying a plane is no different than riding a bicycle, just a lot harder to put baseball cards in the spokes" -Rex Kramer
"Flying a plane is no different than riding a bicycle, just a lot harder to put baseball cards in the spokes" -Rex Kramer
|
M2 bought in 2004 - No problems M2 bought in 2007 - No problems T1 bought in 2008 - No problems T1 bought in 2010 - No problems T1 bought in 2011 - No problems |
"It seems that even Allah's promise of paradise loses a bit of it's luster when there's a dude reigning death on your buddies from 600 meters out." - John_Wayne777 on Battle for Al Najaf 04/04/04
|
Original CompM
LED started to burn out around year 8. Too dim for outdoor use even on brightest setting. I sent it in for warranty when it was 9 years old. Aimpoint did not fix the dim LED and instead claimed they fixed a "dot blinks under recoil" problem. I sent it back, again. They refused to fix it "no longer under warranty." Summary: Good dot sights. They do wear out. Customer support sucks. |
Nothing in this post should be considered information posted in an official capacity. It is the authors personal opinion alone.
Still working on a cool forum title....
Joined:
Jan 2003
Posts:
4293
EE: 100% (41)
"Whisky for the gentlemen that like it. And for the gentlemen that don't like it - Whisky!" -Alec Guinness as MAJ (acting Colonel) Jock Sinclair, D.S.O., M.M. "Tunes of Glory"
|
comp m4, had it for almost 6 months, dot has been on with the original battery the entire time, no problemo |
If our government refuses to obey the constitution.....then what is treason??????
.308.....because people tend to hide behind things when you shoot at them.
.308.....because people tend to hide behind things when you shoot at them.
|
I have owned 3 but currently do not own one. Aimpoint Micro H-1: purchased brand new and didn't turn it off as long as a I had it. Not a single issue Aimpoint ML2: purchased it used and I believe it was from the early 2000's. Not a single issue Aimpoint M2: purchased used, not sure when it was manufactured but it was not the older version. Not a single issue |
|
CompM - 2010 - Not bright enough in daylight
CompM2 - 2010 - Perfect Aimpoint T1 - 2011 - Perfect Aimpoint T1 - 2011 - Perfect Aimpoint T1 - 2010 - Perfect Have a M3 on the way, if I remember I will edit that in this post. |
LMT is a company with lousy QC. Buy from a company that cares about its products, like Bravo Company or LaRue.
| I have an earlier model that doesn't have the insanely long battery life and stupid bright reticle like the Comp ML3 my wife has. It's still a solid sight that holds zero and always works when I turn it on. I just can't leave it running for five years like the newer ones. |
Is it 2012 yet?
I owe nothing to my brothers, nor do I gather debts from them. I ask none to live for me, nor do I live for any others. I covet no man's soul, nor is my soul theirs to covet. - Ayn Rand
I owe nothing to my brothers, nor do I gather debts from them. I ask none to live for me, nor do I live for any others. I covet no man's soul, nor is my soul theirs to covet. - Ayn Rand
|
What I currently own:
(1) T-1: No Issues so far (2,000 rounds) (2) Comp M2's: No issues with these units (bunch of rounds) Previously owned: (1) H-1: No issues (About 1,000 rounds) (6) Comp M2's (No problems except for one I bought off eBay. The 4th bright setting did not turn on, but every other setting worked. Sent it back to seller) (Others had 1,000's through them) (1) Comp M3- No problems (500 rounds or so) (1) Comp ML3- No problems (4,000-5,000 rounds through it) (2) Comp M4's- No problems. (100 rounds through one and the other was BNIB and traded that for the T-1 I have now) I have owned these since mid 2009. I was an Eotech guy and switched around that time and haven't looked back. |
What Happened to the American dream? It came true. You're looking at it.
Feedback +152
Feedback +152
|
Comp M2, bought around 1999. Had spots in front lens coating. Sight functioned fine, but the spots were annoying. Aimpoint, at the time, was less than helpful. Sold it cheap. I now have a Comp M4s and it has been flawless. ETA: M2 came out in 2000. I was close. |
Proud Member - "Team Ranstad"
|
I bought a used M2 about 2 years ago. Now it's shutting off under recoil. It is probably 10 years old and mil issued. Bought it on Ebay. It's on my other AR now, the one I don't use for HD. I should probably call Aimpoint.
I put a T1 on my SBR/HD setup. It has functioned fine. |
AR Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter





