User Panel
User Panel
User Panel
|
Posted: 5/2/2013 6:19:48 PM EDT
[Last Edit: TCBA_Joe]
I can't believe we don't have this yet...
Weapon Mounted IR Laser Pic Thread Post a pic of your DBALs, PEQs, Vitals, etc... Bonus points for something unique like a Newcom LAM. Please no Chinese knock-offs. Lot's of fake PEQ-15s in the Block II threads, lets keep that out of here. PLEASE ADD DESCRIPTIONS OF LASER SETUPS AND FIREARM I'll start: Daniel Defense DDM4v1 TA31 ACOG Surefire m600 with KM2 scout head LDI DBAL I^2 w'/ Green Laser 
|
|
|
|
|
Posted: 5/2/2013 6:26:50 PM EDT
[#1]
I've looking forward to this thread.
|
|
|
|
|
Posted: 5/2/2013 7:01:51 PM EDT
[#2]
Found this on my phone:
Vital-2 (I sold) on a BCM 14.5 A2X (that I also sold) 
|
|
|
|
|
Posted: 5/2/2013 7:19:27 PM EDT
[Last Edit: SkyPup]
[#3]
LDI DBAL-I2 IR & VIS Green
LDI DBAL-I2 IR & VIS Green 
LDI DBAL-I2 at night 
LDI DBAL-I2 IR & Vis Green 
LDI DBAL-I2 & TNVC Torch Pro 
LDI DBAL-D2 IR & IR Illum & Vis Green 
SIG 556 TNVC PVS-14 3X Mag Eotech NV LDI DBAL-I2 Torch Pro 
SIG 716 ACOG TAO2LED FLIR T-50 LEDI DBAL-D2 
LDI DBAL-D2 with IR Neutral Density Filter 
SIG 556 LDI DBAL-D2 FLIR T-60 ACOG TA02LED 
|
|
|
|
|
Posted: 5/2/2013 7:23:17 PM EDT
[#4]
|
|
|
|
TX, USA
|
Posted: 5/2/2013 7:30:36 PM EDT
[Last Edit: di1uted]
[#5]
Nice pics joe
CQBL 
|
|
|
|
Posted: 5/2/2013 7:37:16 PM EDT
[#6]
 An older picture with my older PAQ-4C. I've gone to an LDI LAS/TAC and a helmet mount now. CHRIS |
|
|
|
|
Posted: 5/2/2013 8:16:39 PM EDT
[Last Edit: Darkstar117]
[#7]
SOCOM Block II Clone:
Laser Devices DBAL-D2 
|
|
|
|
|
Posted: 5/2/2013 9:06:08 PM EDT
[Last Edit: Darkstar117]
[#8]
FN SCAR 17S:
Laser Devices DBAL-I2 
|
|
|
|
|
Posted: 5/2/2013 9:07:09 PM EDT
[Last Edit: Darkstar117]
[#9]
FN SCAR 16S:
Laser Devices DBAL-I2 
|
|
|
|
|
Posted: 5/2/2013 9:58:27 PM EDT
[#10]
A few lasers in this mess!
|
|
|
|
|
Posted: 5/2/2013 10:08:34 PM EDT
[#11]
Shitty pic, but you get the idea.
|
|
|
|
|
Posted: 5/2/2013 10:19:16 PM EDT
[#12]
Originally Posted By TNVC:
A few lasers in this mess!
http://img.photobucket.com/albums/v621/Clutch99/Shot_Prep1_zpsb18de16c.jpg Holy crap! Send to me immediately for product testing.
|
|
|
|
USA
|
Posted: 5/2/2013 11:14:56 PM EDT
[#13]
My work gun.
|
|
|
KY, USA
|
Posted: 5/2/2013 11:29:44 PM EDT
[#14]
I like that camo.
|
|
|
|
Posted: 5/2/2013 11:41:14 PM EDT
[Last Edit: bobweaver]
[#15]
|
|
|
|
PA, USA
|
Posted: 5/2/2013 11:50:36 PM EDT
[#16]
Originally Posted By bobweaver:
http://i946.photobucket.com/albums/ad308/bobweaver/964F91DB-225A-4FD4-875E-18BEDFBA1C3B-8329-00000968AB6D2FE4_zps057c9d51.jpg
http://i946.photobucket.com/albums/ad308/bobweaver/FDA2C88E-5052-4791-9ED1-0F3FB74D560C-487-0000007D1C56EF8D_zps84c737e4.jpg I'm gonna go out on a limb here and say the purpose of the thread is for you to show us what "LASERS" you personally own and not to cut and paste some SEAL kit even if your a SEAL
|
|
|
|
Posted: 5/2/2013 11:58:40 PM EDT
[Last Edit: bobweaver]
[#17]
Originally Posted By CTM1:
Originally Posted By bobweaver:
http://i946.photobucket.com/albums/ad308/bobweaver/964F91DB-225A-4FD4-875E-18BEDFBA1C3B-8329-00000968AB6D2FE4_zps057c9d51.jpg
http://i946.photobucket.com/albums/ad308/bobweaver/FDA2C88E-5052-4791-9ED1-0F3FB74D560C-487-0000007D1C56EF8D_zps84c737e4.jpg I'm gonna go out on a limb here and say the purpose of the thread is for you to show us what "LASERS" you personally own and not to cut and paste some SEAL kit even if your a SEAL Threw in the bottom one as my wish list. Is that against the rules? |
|
|
|
|
Posted: 5/3/2013 4:57:17 AM EDT
[#18]
Wish I had something to post in here...
Bring forth the inspiration, though!
~Augee |
|
|
|
|
Posted: 5/3/2013 6:53:21 AM EDT
[#19]
|
|
|
|
USA
|
Posted: 5/3/2013 8:48:44 AM EDT
[#20]
Originally Posted By TNVC:
A few lasers in this mess!
http://img.photobucket.com/albums/v621/Clutch99/Shot_Prep1_zpsb18de16c.jpg I absolutely love that BEM IZ........that is the light saber of the IR world! |
|
|
|
Posted: 5/3/2013 8:51:22 AM EDT
[#21]
|
|
|
|
|
Posted: 5/3/2013 9:43:41 AM EDT
[#22]
It'd be helpful to those of us that 1) don't live in Texas, where everyone seems to have at least one PVS14 or 2) don't work for TNVC if posters threw in a little description/ name of the lasers they're rocking. Browser keeps getting tired of swapping back and forth between AR15.com and TNVC's laser page trying to figure out what is what.
Other than that (slight) whine, great pics, and as always, thanks for the information and inspiration. |
|
|
|
|
Posted: 5/3/2013 9:54:23 AM EDT
[#23]
Originally Posted By r-allen:
Originally Posted By Deoje:
My work gun. https://lh3.googleusercontent.com/-2W2KV3-9q8I/USK5N5F1z6I/AAAAAAAABw8/cSaHcugARhE/s800/IMG_0372.JPG https://lh6.googleusercontent.com/-5jxhhT_G6Hw/USK5NkbtuZI/AAAAAAAABw8/7WO_u6aicx0/s800/IMG_0373.JPG https://lh5.googleusercontent.com/-U2kmmPJ4HyU/USK5JHCyrEI/AAAAAAAABw8/xVY4mHzbQzI/s800/IMG_0375.JPG I like that camo. Yep... Details on that camo? |
|
|
|
|
Posted: 5/3/2013 10:41:19 AM EDT
[#24]
Originally Posted By bobweaver:
http://i946.photobucket.com/albums/ad308/bobweaver/964F91DB-225A-4FD4-875E-18BEDFBA1C3B-8329-00000968AB6D2FE4_zps057c9d51.jpg
http://i946.photobucket.com/albums/ad308/bobweaver/FDA2C88E-5052-4791-9ED1-0F3FB74D560C-487-0000007D1C56EF8D_zps84c737e4.jpg What is wrong with you? 
Originally Posted By ncorry:
It'd be helpful to those of us that 1) don't live in Texas, where everyone seems to have at least one PVS14 or 2) don't work for TNVC if posters threw in a little description/ name of the lasers they're rocking. Browser keeps getting tired of swapping back and forth between AR15.com and TNVC's laser page trying to figure out what is what. Other than that (slight) whine, great pics, and as always, thanks for the information and inspiration. Good call, OP updated to request descriptions of setups 
|
|
|
|
|
Posted: 5/3/2013 12:28:02 PM EDT
[#25]
  |
|
|
|
|
Posted: 5/3/2013 12:52:32 PM EDT
[#26]
Originally Posted By RenegadeX:
<a href="http://s839.photobucket.com/user/Umbrarian/media/Guns/300BLKIR_zpsb6886da8.jpg.html" target="_blank">http://i839.photobucket.com/albums/zz314/Umbrarian/Guns/300BLKIR_zpsb6886da8.jpg</a> <a href="http://s839.photobucket.com/user/Umbrarian/media/Guns/BlackOutUpper.jpg.html" target="_blank">http://i839.photobucket.com/albums/zz314/Umbrarian/Guns/BlackOutUpper.jpg</a> Renegade, How are your BDC holds with that set up? What's the POI and hold over changes like between super and subs? What distance do you zero the IR? Been thinking of doing a similar 300 black. Thanks |
|
|
|
|
Posted: 5/3/2013 1:21:56 PM EDT
[#27]
Originally Posted By RenegadeX:
<a href="http://s839.photobucket.com/user/Umbrarian/media/Guns/300BLKIR_zpsb6886da8.jpg.html" target="_blank">http://i839.photobucket.com/albums/zz314/Umbrarian/Guns/300BLKIR_zpsb6886da8.jpg</a> <a href="http://s839.photobucket.com/user/Umbrarian/media/Guns/BlackOutUpper.jpg.html" target="_blank">http://i839.photobucket.com/albums/zz314/Umbrarian/Guns/BlackOutUpper.jpg</a> Nice setup M. The ITAL is underrated IMHO, but is a perfect match for the mortar-like trajectory of the 300 BLK. |
|
|
|
PA, USA
|
Posted: 5/3/2013 3:01:55 PM EDT
[#28]
On the 300 black/whisper has anyone thought of approaching Laser Devices and having them make a DBAL-I2 or a CQBL with two IR lasers instead of the red or green laser as the second beam. Does anyone really use the red or green? With two IR's I see two scenarios, one IR for subs and one IR for supers or both for subs but for two different ranges.
|
|
|
PA, USA
|
Posted: 5/3/2013 3:07:39 PM EDT
[#29]
Originally Posted By bobweaver:
Originally Posted By CTM1:
Originally Posted By bobweaver:
http://i946.photobucket.com/albums/ad308/bobweaver/964F91DB-225A-4FD4-875E-18BEDFBA1C3B-8329-00000968AB6D2FE4_zps057c9d51.jpg
http://i946.photobucket.com/albums/ad308/bobweaver/FDA2C88E-5052-4791-9ED1-0F3FB74D560C-487-0000007D1C56EF8D_zps84c737e4.jpg I'm gonna go out on a limb here and say the purpose of the thread is for you to show us what "LASERS" you personally own and not to cut and paste some SEAL kit even if your a SEAL Threw in the bottom one as my wish list. Is that against the rules? Not trying to poke you, but was trying to say lets keep with the OP's wishes of keeping the thread to "real lasers owned and no fake stuff". 
|
|
|
|
Posted: 5/3/2013 3:09:41 PM EDT
[#30]
Originally Posted By bobweaver: Originally Posted By RenegadeX: <a href="http://s839.photobucket.com/user/Umbrarian/media/Guns/300BLKIR_zpsb6886da8.jpg.html" target="_blank">http://i839.photobucket.com/albums/zz314/Umbrarian/Guns/300BLKIR_zpsb6886da8.jpg</a> <a href="http://s839.photobucket.com/user/Umbrarian/media/Guns/BlackOutUpper.jpg.html" target="_blank">http://i839.photobucket.com/albums/zz314/Umbrarian/Guns/BlackOutUpper.jpg</a> Renegade, How are your BDC holds with that set up? What's the POI and hold over changes like between super and subs? What distance do you zero the IR? Been thinking of doing a similar 300 black. Thanks I use 220 subsonic and it is BZ to about 125 yards. I initially used 50 yards as the zero, but upon advice from Robert I switched to 100 which is a little flatter. There are some very minor differences between T-1 and laser since the laser sits a little lower than the T-1, but it is negligible for the distances I shoot this gun at. So with BZ I know the laser is about +- 2 inches from POI out to about 125 yards. I do not do holdover past that, the 220s drop pretty fast. Also, the WML works fine for these shorter ranges.
|
|
|
|
|
Posted: 5/3/2013 3:56:16 PM EDT
[Last Edit: SkyPup]
[#31]
Also has TNVC Torch Pro and Olight M-20 Crimson Red Led mounted too. Without the IR laser: 
Due to numerous PM inquires as to a bull barrel picitanny rail mount with three rails on my Ruger 10-22, here where you can get the LaserLyte shotgun mount, I put a thin ring of rubber strap around the barrel prior to mounting it, it fits good and tight and works excellent: 
http://www.amazon.com/Laserlyte-Shotgun-Rail-Mount-Exte/dp/B0041FPG40 |
|
|
|
|
Posted: 5/3/2013 6:34:31 PM EDT
[#32]
M16A4 Clone-ish:
Laser Devices DBAL-I2 With an Aussie behind the sights. 
|
|
|
|
FL, USA
|
Posted: 5/3/2013 9:53:19 PM EDT
[#33]
I finally get to play... Got it today.. DBAL-D2
|
|
|
USA
|
Posted: 5/3/2013 11:53:31 PM EDT
[#34]
Originally Posted By bg10:
Originally Posted By r-allen:
I like that camo. Yep... Details on that camo? Thanks. The camo is just a homebrew Krylon job. I did it on my back deck about 3 feet to the left of where those pictures were taken. Nothing special really I just used a bunch of different vegetation as a template. I thought it turned out pretty good. As far as the laser is concerned it is a Laser Devices CQBL-1. |
|
|
|
Posted: 5/4/2013 12:53:45 AM EDT
[#35]
My Block 2 w DBAL-I2. Just got it from Mod Armory. It has the hi/lo IR setting and green laser. |
|
|
|
|
Posted: 5/4/2013 1:12:43 AM EDT
[#36]
Originally Posted By CTM1:
On the 300 black/whisper has anyone thought of approaching Laser Devices and having them make a DBAL-I2 or a CQBL with two IR lasers instead of the red or green laser as the second beam. Does anyone really use the red or green? With two IR's I see two scenarios, one IR for subs and one IR for supers or both for subs but for two different ranges. Tried that exact thing with .22lr subs and supers using a 2A. Dialed illuminator down to same size as laser: Left laser for subs ( 25 yards ) and right for supers ( 50 yards ). Found that the difference in POI was enough to warrant the two separate lasers. |
|
|
|
CA, USA
|
Posted: 5/4/2013 6:15:48 AM EDT
[Last Edit: dog_dad]
[#37]
For all of you guys with the SR-D-IT's how the hell do you guys hold your weapons or activate them? I've tried them mounted on the 9 or 3 o clock where my support hand would be but they make the width too wide and in turn I can not get a good grip on the gun. I actually see that many of you guys run them in conjunction with vertical foregrips, maybe that's why I haven't had much luck.
|
|
|
|
Posted: 5/4/2013 8:02:22 AM EDT
[#38]
Originally Posted By patriot_man:
For all of you guys with the SR-D-IT's how the hell do you guys hold your weapons or activate them? I've tried them mounted on the 9 or 3 o clock where my support hand would be but they make the width too wide and in turn I can not get a good grip on the gun. I actually see that many of you guys run them in conjunction with vertical foregrips, maybe that's why I haven't had much luck. Go look at my pic on Pg 1. It's ambi, and won't ever get bumped doing barricades. That set up has the secondary advantage of being about as ambi as you can get it the tape switch is missing or disabled. |
|
|
|
PA, USA
|
Posted: 5/4/2013 9:30:23 AM EDT
[#39]
Originally Posted By patriot_man:
For all of you guys with the SR-D-IT's how the hell do you guys hold your weapons or activate them? I've tried them mounted on the 9 or 3 o clock where my support hand would be but they make the width too wide and in turn I can not get a good grip on the gun. I actually see that many of you guys run them in conjunction with vertical foregrips, maybe that's why I haven't had much luck. I have seen pics where guys have tucked the pressure pad in between the groove of the 12 and 9 o'clock rails. |
|
|
TX, USA
|
Posted: 5/4/2013 1:50:43 PM EDT
[#40]
Originally Posted By CTM1:
Originally Posted By patriot_man:
For all of you guys with the SR-D-IT's how the hell do you guys hold your weapons or activate them? I've tried them mounted on the 9 or 3 o clock where my support hand would be but they make the width too wide and in turn I can not get a good grip on the gun. I actually see that many of you guys run them in conjunction with vertical foregrips, maybe that's why I haven't had much luck. I have seen pics where guys have tucked the pressure pad in between the groove of the 12 and 9 o'clock rails. That's what I did |
|
|
|
Posted: 5/4/2013 4:53:11 PM EDT
[#41]
LDI LAS/TAC2
LDI MP5 cocking tube IR laser 
LDI DBAL I2 
LDI OTAL C1 IR 
LDI AR2A 
I like me some LDI. 
|
|
|
|
|
Posted: 5/4/2013 4:58:08 PM EDT
[Last Edit: TCBA_Joe]
[#42]
Originally Posted By TDunn:
LDI LAS/TAC2 http://i142.photobucket.com/albums/r82/dvlray6/firearms/MP5SDA6R_zps501dd512.jpg LDI MP5 cocking tube IR laser http://i142.photobucket.com/albums/r82/dvlray6/firearms/MP5A3R_zpsbf1c7a0f.jpg
LDI DBAL I2 http://i142.photobucket.com/albums/r82/dvlray6/firearms/MRPR_zps836e52bb.jpg LDI OTAL C1 IR http://i142.photobucket.com/albums/r82/dvlray6/firearms/MPR12Rsidefull.jpg LDI AR2A http://i142.photobucket.com/albums/r82/dvlray6/firearms/BUSHR_zps0edf14b6.jpg I like me some LDI. I love your freaking MP5 every time it's posted
What is the LED looking thing under the muzzle? |
|
|
|
|
Posted: 5/4/2013 5:02:56 PM EDT
[#43]
LWRC with OTAL
|
|
|
|
|
Posted: 5/4/2013 6:24:26 PM EDT
[#44]
Originally Posted By TCBA_Joe:
What is the LED looking thing under the muzzle? It is just the hex set screw for clamping the foreend rail to the frame. It would be a great place for an IR laser illum though. I really like the LDI cocking tube laser. They make a dual vis/ir setup I may have to get someday. I wish they were compatible with my MP5SD though, but alas. |
|
|
|
|
Posted: 5/4/2013 7:32:07 PM EDT
[Last Edit: NorthStaR209]
[#45]
Originally Posted By TDunn:
Originally Posted By TCBA_Joe:
What is the LED looking thing under the muzzle? It is just the hex set screw for clamping the foreend rail to the frame. It would be a great place for an IR laser illum though. I really like the LDI cocking tube laser. They make a dual vis/ir setup I may have to get someday. I wish they were compatible with my MP5SD though, but alas. Is the IR civi unit available for the MP5 now? I keep checking around but only run into the high power version. The unit with the vis laser and ir point looks badass too. |
|
|
|
KS, USA
|
Posted: 5/4/2013 7:38:33 PM EDT
[#46]
Originally Posted By NorthStaR209:
Is the IR civi unit available for the MP5 now? I keep checking around but only run into the high power version. The unit with the vis laser and ir point looks badass too. You have to call them and order it, there was another guy on here that has one on his MP5. You'll have to wait a few weeks on it, I'm reluctant to purchase it just yet for my HK94. IIRC he had an M600 with the vampire head and a thorntail mount on the surefire rail. |
|
|
|
Posted: 5/4/2013 7:53:06 PM EDT
[#47]
Originally Posted By NorthStaR209:
Is the IR civi unit available for the MP5 now? I keep checking around but only run into the high power version. The unit with the vis laser and ir point looks badass too. Yes, the one in my MP5 (pictured) is a C1 civilian unit. In truth, 0.7mW is still quite a bit of power at subgun ranges with current gen NVG. I'm sure TNVC can order you one if you want it. |
|
|
|
|
Posted: 5/4/2013 7:55:32 PM EDT
[Last Edit: NorthStaR209]
[#48]
Has there not been a full release on them or just a product of little demand?
Laser Devices cqbl-1 
|
|
|
|
|
Posted: 5/6/2013 12:51:56 AM EDT
[Last Edit: Ryan_Ruck]
[#49]
LaRue OBR 7.62 20" with Newcon LAM2:
Glock 21 with LAS/TAC: 
Robinson Armament XCR in 7.62x39 with DBAL-D2: 
|
|
|
|
|
Posted: 5/6/2013 10:03:59 PM EDT
[#50]
Scar 17S with FDE LDI CQBL-1
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
