User Panel
Originally Posted By Colt653: I have seen similar KABOOMS at 2 different USPSA matches. Both times, it was the same R.O., both times, he asked "Dillon 550 ?" Both times the shooter said "yes" View Quote Thanks again to OP. This was a good thread. While I've always had a personal bias for autoindexing - this post right here has to be the most powerful one in the whole thread. Not saying it can't safely be done - but wow. I will say for rifle - or really any situation where a double means an inescapable volume of dumped powder, then less critical. But for pistol chunk chunk chunk... |
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Originally Posted By ScottS: No offense intended to anyone here, or anyone that reloads, but this is why I never allow reloads to be fired in any gun I own. And before all the "factory loads have caused KABOOMs, too" comments, the odds don't even come close to comparing to the ones caused by reloads. View Quote This is the Reloading Forum, we reload here. |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
I'm going to comment on my observation of the video. Everything else has been mentioned.
When firing rounds 1 through 7, I believe I see muzzle flash, #5 is iffy due to the speed of 4,5,6. I don't see any flash for round 8, and kaboom at round 9. Back to the barrel obstruction comment earlier? I don't know. Maybe replay in slow motion? Just my thoughts. |
|
Team Ranstad
|
Muzzle flash is inconsistent, especially on video. If there is a bang and the gun cycled, the bullet is 100% out of the barrel.
|
|
|
I have a 550 too with two lights hovering over it. I use win. 231 and it’s easy to spot a double charge. Glad you weren’t injured.
That was a fast way to disassemble for cleaning! |
|
|
Originally Posted By Colt653: Some of the things I love about the XL650 / 750 is that is auto-indexes the case to the nest station, and you have an extra station for the power check buzzer too much, or too little powder will sound the alarm https://www.youtube.com/watch?v=JXbrTVEI0Cs View Quote |
|
|
Actually pretty impressed with how the gun handled that. I have been looking at PSA pistols lately, might pull the trigger on one yet.
|
|
|
Originally Posted By s4s4u: Actually pretty impressed with how the gun handled that. I have been looking at PSA pistols lately, might pull the trigger on one yet. View Quote Kind of my thought. Failure mode isn't about minimizing damage, it's about minimizing harm. So while it looks spectacular, the barrel failed in a manner that resulting in no harm to the shooter. I can't say for sure, but it almost looks like they went for a "soft" alloy in the barrel, as part of that. Recall: "hard" is another word for brittle, and if that barrel was harder, that failure world have been frag of flying metal. Vs holding together but peeling. That may be just an aspect of other manufacturing decisions, but I think OP will agree, that gun failing like a hand grenade with frag, wouldn't have been good. |
|
|
Originally Posted By s4s4u: Actually pretty impressed with how the gun handled that. I have been looking at PSA pistols lately, might pull the trigger on one yet. View Quote I won’t hesitate to buy another one. That’s part of the pain, the Micro Dagger was basically brand new. It was my second trip to the range with it. I normally carry a G19, the micro dagger with the 15 round magazine is a game changer. |
|
|
Originally Posted By Milhouse: I won’t hesitate to buy another one. That’s part of the pain, the Micro Dagger was basically brand new. It was my second trip to the range with it. I normally carry a G19, the micro dagger with the 15 round magazine is a game changer. View Quote View All Quotes View All Quotes Originally Posted By Milhouse: Originally Posted By s4s4u: Actually pretty impressed with how the gun handled that. I have been looking at PSA pistols lately, might pull the trigger on one yet. I won’t hesitate to buy another one. That’s part of the pain, the Micro Dagger was basically brand new. It was my second trip to the range with it. I normally carry a G19, the micro dagger with the 15 round magazine is a game changer. For perspective - the entire gun is cheaper than your co-pay to the Urgent Care center. |
|
|
"...I think I speak for all of us when I say that Obama and everyone who voted for him can fornicate themselves with an iron stick. "
|
Why do you hang out in the kaboom forum if you don't allow kaboom rounds in your gun?
|
|
|
Death to quislings.
|
1- Answers one question regarding wet vs dry cleaning. It is a lot easier to see inside brass that is clean metal vs black soot.
That requires reloading in 2 stages and is my SOP now for rifle and pistol. For pistol I size and decap on one pass, wet clean brass then dry, finally load it after sorting by headstamp. Resolves brass-related issues which cause most hang-ups, minimizing the chance of a screw-up when dumping powder and seating bullets. 2- Auto indexing does help prevent double charges but.... 3- I still remove all brass from all stations after clearing a problem. I throw removed brass into a cigar box, then process them separately after completing the remainder of the batch. And I use Dillon powder check dies on the 1050s. Glad to see you weren't hurt. |
|
|
Originally Posted By Ronnie_B: 1- Answers one question regarding wet vs dry cleaning. It is a lot easier to see inside brass that is clean metal vs black soot. That requires reloading in 2 stages and is my SOP now for rifle and pistol. For pistol I size and decap on one pass, wet clean brass then dry, finally load it after sorting by headstamp. Resolves brass-related issues which cause most hang-ups, minimizing the chance of a screw-up when dumping powder and seating bullets. 2- Auto indexing does help prevent double charges but.... 3- I still remove all brass from all stations after clearing a problem. I throw removed brass into a cigar box, then process them separately after completing the remainder of the batch. And I use Dillon powder check dies on the 1050s. Glad to see you weren't hurt. View Quote I agree. Especially thr first point. Though I just wet tumble pistol brass raw and call it done. This is where media makes a big difference- because that scours the inside to sunglasses-required bright BLING level - for exactly this benefit. Makes it a lot easier to spot the *very* rare Squib-inbound, as it rotates around to the seating station and brightly says Hello! |
|
|
Originally Posted By ScottS: Valid point. I thought it was the KABOOM forum. It seems we're both right. View Quote View All Quotes View All Quotes Originally Posted By ScottS: Originally Posted By dryflash3: No offence taken, but you are in the wrong forum posting your viewpoint. This is the Reloading Forum, we reload here. Valid point. I thought it was the KABOOM forum. It seems we're both right. You don't belong here. OP, thank you for sharing this. Best pic of this kind of incident I think I've ever seen. I like the way you've handled it. 4.2gr TG w/ 124gr bullets is my go-to for 9mm. That under 124gr V-Crowns is what's in my sidearm as we speak. Been using it for years, like it alot, for .40 as well. Lot of great advice in this thread. Yeah, I too have a light that shines down on the press, and look in every case. Turret press here, it auto-indexes obviously. |
|
|
Executive Director, Vast Right Wing Conspiracy
NC, USA
|
Even on my Dillon XL-650, I use a digital powder scale/dispenser for each charge, and I only drop the powder if everything is ready to go to the next stage.
|
“People will forgive you for being wrong, but they will never forgive you for being right—especially if events prove you right while proving them wrong.”
- Thomas Sowell |
Originally Posted By Cardplayer: Get the light from Inline Fab, it may help, I have it on my 550s and are fantastic. Also, consider working with a slower powder that will fill your cases. I'm sure you know this but, If you ever leave your press for any reason leave it with the handle in the down position. View Quote This is a good idea. I like to use powders that will overflow the case if there's a double charge, makes it hard to ignore when it happens. |
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.