User Panel
User Panel
User Panel
GA, USA
|
Posted: 1/22/2019 4:18:17 PM EDT
[Last Edit: Trunkmonkey4]
I think this is way cool, and I want one... as soon as a pistol brace (collapsible or folding) is released for it. Seems like a way fun gun to burn through my excess 22lr.
|
|
|
|
Posted: 8/11/2020 9:34:07 PM EDT
[#1]
Quote HistoryOriginally Posted By seattlite: This light lines up with the trigger guard...but not sure I like that gap: https://lh3.googleusercontent.com/pw/ACtC-3dzAqtQzhvSQTY506ORjq-T6ruB1QKoOSw-YCpq7tg9PWTnXPB9Nf1z9vA2_mx1yLcuBV2s7qpeWB5ABYeXq41Jr9dK2bygyLqwWXZXsk5ZL62PAaOtUV_LZkqvx1dOEvCgrJNvyza3aHPdfgSR00AzCQ=w1251-h938-no Sprayfoam should fix it. |
|
|
|
|
Posted: 8/26/2020 10:10:31 AM EDT
[#2]
I ordered one of these the other day. I'm tempted to SBR it to fit my "MP7" fantasies.
|
|
|
|
USA
|
Posted: 8/26/2020 7:02:38 PM EDT
[#3]
Quote HistoryOriginally Posted By Outrider: I ordered one of these the other day. I'm tempted to SBR it to fit my "MP7" fantasies. Nice...which stock if you SBR it? |
|
|
PA, USA
|
Posted: 8/27/2020 12:14:31 AM EDT
[#4]
Quote HistoryOriginally Posted By Outrider: I ordered one of these the other day. I'm tempted to SBR it to fit my "MP7" fantasies.  it 100% will. mines all done up, and im looking to SBR it as well. rhey shoot ALL DAY....just gitts clean the 22 gunk every few hundo rnds if u suppress it....and u should |
|
|
|
Posted: 8/27/2020 9:35:51 AM EDT
[#5]
Quote HistoryOriginally Posted By seattlite: Nice...which stock if you SBR it? I've got these two MCX stocks to try   I'd really like to see if I could get this one to work.  Also JMAC Customs has some side folding stock options that are MCX-esque |
|
|
|
|
Posted: 8/27/2020 10:15:28 AM EDT
[Last Edit: Outrider]
[#6]
I found this picture which seems to show the Sig collapsible brace working (though no picture of it collapsed) so maybe there is hope for the stock. It is a bit chunky though stacking the stock on the adapter. The wheels keep turning...
ETA: Tracked down the owner and it does not collapse. 
|
|
|
|
|
Posted: 8/27/2020 11:48:53 AM EDT
[#7]
Here is a link to a rail adaptor for the CP33
REHV Arms CP33 Adaptor Here is a link for a telescoping brace for the CP33 KelTec CP33 Telescoping Brace Adapter These are pretty much the only ones available unless you want to 3D print your own adaptor. |
|
|
|
|
Posted: 8/27/2020 11:53:13 AM EDT
[#8]
Quote HistoryOriginally Posted By chumpmiester: Here is a link to a rail adaptor for the CP33 REHV Arms CP33 Adaptor Here is a link for a telescoping brace for the CP33 KelTec CP33 Telescoping Brace Adapter These are pretty much the only ones available unless you want to 3D print your own adaptor. Yep. Pretty sure the above photo is using the Rehv one. I'm going to snag one when they come back in stock. Figuring out a stock situation is what I'm mulling over now. |
|
|
|
|
Posted: 8/27/2020 11:59:21 AM EDT
[#9]
|
|
|
|
USA
|
Posted: 8/27/2020 1:20:11 PM EDT
[Last Edit: seattlite]
[#10]
Prior to getting the Farrowtech tele brace adapter, I got one one of the Rehv Arms adapters when they first came out. I did a fit/function test with a sig brace I had laying around. I prefer the Farrowtech. My OCD bothered me that the Sig Brace interface would not align with the top of the Rev Arms adapter. If I moved the Sig Brace one more notch up, the top of the brace's picatinny interface would interfere with the CP33 charging handle.
 
|
|
|
|
Posted: 8/27/2020 3:11:32 PM EDT
[#11]
Quote HistoryOriginally Posted By seattlite: Prior to getting the Farrowtech tele brace adapter, I got one one of the Rehv Arms adapters when they first came out. I did a fit/function test with a sig brace I had laying around. I prefer the Farrowtech. My OCD bothered me that the Sig Brace interface would not align with the top of the Rev Arms adapter. If I moved the Sig Brace one more notch up, the top of the brace's picatinny interface would interfere with the CP33 charging handle. https://lh3.googleusercontent.com/pw/ACtC-3fj4rzCnyLPhWcUfqPDpKkAcghzNYLlYas_nKciT8E6W539KpDfIM5BbBcr6cfM94q0yGj-y-LX9YpBxCiesE8tKTEC-j5XJ1R_wn_27gmEjRV8gHR37IU-UtG-VyYiWBna_sKo1cGTjPxUWIVd8GWWdw=w1606-h1205-no https://lh3.googleusercontent.com/pw/ACtC-3f8bpmmOJ5pewTP5IrxpxSf0cVcWiycvAlKsqiWEivVLhMLzBvU5T1nRLepegePxhUi_Xczav_bDnLVaVT1IWZCfRygsJOKQZTuhfhP1oCmw-n0nWCEXCMaFb_oG8XIYShZuXOXB8uHatKUinsMGTDixw=w1606-h1205-no That does mess with my OCD a little bit too. I'm just not a brace guy though. Maybe I could do a stock with Farrowtech's system. |
|
|
|
USA
|
Posted: 8/27/2020 3:35:28 PM EDT
[#12]
Quote HistoryOriginally Posted By Outrider: That does mess with my OCD a little bit too. I'm just not a brace guy though. Maybe I could do a stock with Farrowtech's system. Yep...I hear ya. Maybe Kel-Tek could make a CMR in 22LR...which takes the CP33 mags....that would be ideal. |
|
|
|
Posted: 8/27/2020 3:37:11 PM EDT
[#13]
Quote HistoryOriginally Posted By seattlite: Yep...I hear ya. Maybe Kel-Tek could make a CMR in 22LR...which takes the CP33 mags....that would be ideal. That would be the ticket. |
|
|
|
|
Posted: 8/27/2020 3:47:37 PM EDT
[#14]
Is anyone making a quality holster for the cp33 yet?
|
|
|
|
|
Posted: 8/27/2020 4:41:56 PM EDT
[#15]
There are a few holsters available. I'm trying to find a good one with a cutout for a micro reflex/red dot sight.
|
|
|
|
|
Posted: 9/3/2020 5:44:16 PM EDT
[Last Edit: HK_DUDE]
[#16]
Had mine out today again.
Great trigger, accurate and reliable. I did have one failure to fire, followed by a mis feed in one in my 5 mags. 4 mags went 30/30 and that last mag went 28/30. I am trying to keep that mag in mind to see if it could be mag related. Shot some NOS Federal walmart bulk. |
|
|
|
|
Posted: 10/3/2020 11:44:54 AM EDT
[#17]
Form 1 came back
 
|
|
|
|
|
Posted: 10/3/2020 11:46:42 AM EDT
[#18]
Looks good!
|
|
|
|
CO, USA
|
Posted: 10/27/2020 7:22:50 PM EDT
[#19]
Hey all - good news, Kel Tec just came out with the +17 magazine extension, so y'all are up to 50 rounds per mag now if you want it!
|
|
|
|
Posted: 10/28/2020 8:58:49 PM EDT
[#20]
Quote HistoryOriginally Posted By Sheriff-Will-Teasle: Hey all - good news, Kel Tec just came out with the +17 magazine extension, so y'all are up to 50 rounds per mag now if you want it! Thanks for the heads up. They are sold out already, but I will keep an eye out and pick a couple up. |
|
|
|
|
Posted: 10/28/2020 11:26:19 PM EDT
[#21]
Extensions and a larger paddle style mag release, and I'll be good to go.
|
|
|
|
WA, USA
|
Posted: 11/21/2020 9:11:36 PM EDT
[#22]
250 rounds through the new 50 round magazine, zero issues of any kind using Remington Thunderbolt.
|
|
|
|
Posted: 12/25/2020 12:48:31 AM EDT
[#23]
I love my sbr cp33, but I am having failures to feed even using the nest loader.
|
|
|
|
|
Posted: 12/27/2020 3:46:07 PM EDT
[#24]
Quote HistoryOriginally Posted By vengarr: I love my sbr cp33, but I am having failures to feed even using the nest loader. https://www.AR15.Com/media/mediaFiles/74310/FB_IMG_1608317543013-1747287.jpg What ammo you having issues with? |
|
|
|
|
Posted: 12/27/2020 8:24:09 PM EDT
[#25]
Quote HistoryOriginally Posted By HK_DUDE: What ammo you having issues with? Quote HistoryOriginally Posted By HK_DUDE: Originally Posted By vengarr: I love my sbr cp33, but I am having failures to feed even using the nest loader. https://www.AR15.Com/media/mediaFiles/74310/FB_IMG_1608317543013-1747287.jpg What ammo you having issues with? Everything i have tried. |
|
|
|
WA, USA
|
Posted: 12/28/2020 12:21:04 AM EDT
[#26]
How do people like thei Farrowtech braces? Debating between the Farrowtech and the Rehv Arms adapter with a side folding brace.
|
|
|
|
Posted: 12/28/2020 12:42:52 AM EDT
[#27]
I like the farrow tech. The only thing I don't like is that it will flex.
|
|
|
|
|
Posted: 12/28/2020 8:02:52 AM EDT
[#28]
Quote HistoryOriginally Posted By sh1fty: I like the farrow tech. The only thing I don't like is that it will flex. They are hollow. I wonder if a piece of al rod will stiffent it up. |
|
|
|
|
Posted: 12/29/2020 9:17:59 PM EDT
[#29]
I broke mine cp33 down and scrubbed it and cleaned it to pristine. While i was cleaning the bore I foubd a small burr on the ramped part of the chamber. Let's see if that fixes it.
|
|
|
|
|
Posted: 12/30/2020 12:35:01 PM EDT
[#30]
Quote HistoryOriginally Posted By vengarr: They are hollow. I wonder if a piece of al rod will stiffent it up. Quote HistoryOriginally Posted By vengarr: Originally Posted By sh1fty: I like the farrow tech. The only thing I don't like is that it will flex. They are hollow. I wonder if a piece of al rod will stiffent it up. That's a good idea - I'll eyeball it this weekend |
|
|
|
|
Posted: 1/13/2021 12:44:08 PM EDT
[#31]
Quote HistoryOriginally Posted By vengarr: I broke mine cp33 down and scrubbed it and cleaned it to pristine. While i was cleaning the bore I foubd a small burr on the ramped part of the chamber. Let's see if that fixes it. Update? @vengarr Mine chokes when it gets dirty after a couple hundred CCI Standards, all suppressed. |
|
|
|
|
Posted: 1/14/2021 2:35:45 PM EDT
[#32]
I found one.
At msrp even. Think I'll grab it. |
|
|
|
|
Posted: 1/30/2021 3:52:21 PM EDT
[#33]
 
|
|
|
|
|
Posted: 2/5/2021 5:38:51 PM EDT
[#34]
Quote HistoryOriginally Posted By Steamedliver: Update? @vengarr Mine chokes when it gets dirty after a couple hundred CCI Standards, all suppressed. Quote HistoryOriginally Posted By Steamedliver: Originally Posted By vengarr: I broke mine cp33 down and scrubbed it and cleaned it to pristine. While i was cleaning the bore I foubd a small burr on the ramped part of the chamber. Let's see if that fixes it. Update? @vengarr Mine chokes when it gets dirty after a couple hundred CCI Standards, all suppressed. Still runs like shit. |
|
|
|
USA
|
Posted: 3/20/2021 4:02:08 PM EDT
[#35]
Question for the guys running optics. What height works well when braced? Standard AR heights looks like they might be too tall.
|
|
|
|
Posted: 3/20/2021 7:45:32 PM EDT
[#36]
Quote HistoryOriginally Posted By vengarr: Still runs like shit. Send it back to KelTec. |
|
|
|
|
Posted: 3/24/2021 3:44:54 PM EDT
[#37]
Finally bit the bullet and ordered one. With that fucking pedophile in office, shits not getting cheaper.
|
|
|
|
|
Posted: 3/25/2021 2:46:59 PM EDT
[#38]
mag extensions currently in stock. Apparently they restock Tuesdays and Thursdays at 2:00 pm EST
https://www.keltecweapons.com/product/cp33-17-magazine-extension/ |
|
|
|
|
Posted: 3/25/2021 3:08:11 PM EDT
[#39]
Quote HistoryOriginally Posted By nottooslow: mag extensions currently in stock. Apparently they restock Tuesdays and Thursdays at 2:00 pm EST https://www.keltecweapons.com/product/cp33-17-magazine-extension/ Awesome thanks ordered a couple. |
|
|
|
|
Posted: 4/7/2021 3:10:30 PM EDT
[#40]
coming along pretty good there...
Colored pieces will be black in the final version, this is just figuring things out. 
|
|
|
|
USA
|
Posted: 4/20/2021 10:33:49 PM EDT
[#41]
Quote HistoryOriginally Posted By evnash: New toy. Budget red dot , stippled grip, safety, charging handle. Next will be a fs1913 folding brace. Also made a Kydex owb holster that uses a combat loop for belt attachment. Print is black leather look. For the grip stipple, I only stippled the raised squares but I continued the squares on the front and back strap. https://www.AR15.Com/media/mediaFiles/222048/0B83838F-220F-48EF-B56E-2A0C472E594D_jpe-1287128.JPG https://www.AR15.Com/media/mediaFiles/222048/B81F73AB-1FAF-46B6-8FB8-3BA86CF803BF_jpe-1287126.JPGhttps://www.AR15.Com/media/mediaFiles/222048/A3EF362F-0C67-4594-90FE-E5BED63BAB11_jpe-1287127.JPG @evnash can you see the regular sights through the trs? It was the only red dot I could think of that might be a possibility. |
|
|
AZ, USA
|
Posted: 4/21/2021 11:54:56 AM EDT
[Last Edit: houlster]
[#42]
My SBR...
The CGS is for show. I have a Sparrow that I actually use with it. Mine has been very reliable. About 700 rnds through it now. Maybe a couple mag related stoppages is all.    |
|
|
|
Posted: 4/21/2021 12:26:01 PM EDT
[#43]
Quote HistoryOriginally Posted By Caeser2001: @evnash can you see the regular sights through the trs? It was the only red dot I could think of that might be a possibility. no way |
|
|
|
USA
|
Posted: 4/22/2021 11:39:14 PM EDT
[#44]
Quote HistoryOriginally Posted By houlster: My SBR... The CGS is for show. I have a Sparrow that I actually use with it. Mine has been very reliable. About 700 rnds through it now. Maybe a couple mag related stoppages is all. https://lh3.googleusercontent.com/yGVRAjZW53W1Oqt0DfEUJVi6Zc0QQAJxxdFBOXQ9hO0Z8ZcDpKk55uwTGVEk2fkXGy2nkWH5MxGRg_f4Rug=w1000 https://lh3.googleusercontent.com/yzw27vzuYWHA0EI7XkulfWQEr6WKMU_Qbr9vciLGKsgicZhvLY43uoqtkuxIg8Yt-DFFCeUjF4mmQ6y5l2g=w1000 https://lh3.googleusercontent.com/zAyGokROyZYGuIO32j-xFWqJjCyJjGswDHxwjeZKX2No4LDfJZ1AnJYcK2Qi7kfuBei7nBuXFx147B3l45c=w1000 Nice. Where did you get the stock/adapter? |
|
|
AZ, USA
|
Posted: 4/23/2021 12:39:07 AM EDT
[#45]
Quote HistoryOriginally Posted By seattlite: Nice. Where did you get the stock/adapter? The stock is from a B&T USW. The adapter, AFG & latch are all 3D print designs I made. |
|
|
|
Posted: 4/23/2021 9:34:59 AM EDT
[#46]
Quote HistoryOriginally Posted By houlster: My SBR... The CGS is for show. I have a Sparrow that I actually use with it. Mine has been very reliable. About 700 rnds through it now. Maybe a couple mag related stoppages is all. https://lh3.googleusercontent.com/yGVRAjZW53W1Oqt0DfEUJVi6Zc0QQAJxxdFBOXQ9hO0Z8ZcDpKk55uwTGVEk2fkXGy2nkWH5MxGRg_f4Rug=w1000 https://lh3.googleusercontent.com/yzw27vzuYWHA0EI7XkulfWQEr6WKMU_Qbr9vciLGKsgicZhvLY43uoqtkuxIg8Yt-DFFCeUjF4mmQ6y5l2g=w1000 https://lh3.googleusercontent.com/zAyGokROyZYGuIO32j-xFWqJjCyJjGswDHxwjeZKX2No4LDfJZ1AnJYcK2Qi7kfuBei7nBuXFx147B3l45c=w1000 that's badass, any more pics / info on the side charger? |
|
|
|
USA
|
Posted: 4/23/2021 2:02:48 PM EDT
[#47]
Quote HistoryOriginally Posted By houlster: The stock is from a B&T USW. The adapter, AFG & latch are all 3D print designs I made. Quote HistoryOriginally Posted By houlster: Originally Posted By seattlite: Nice. Where did you get the stock/adapter? The stock is from a B&T USW. The adapter, AFG & latch are all 3D print designs I made. NICE!!! |
|
|
AZ, USA
|
Posted: 4/24/2021 4:28:43 PM EDT
[#48]
Quote HistoryOriginally Posted By nottooslow: that's badass, any more pics / info on the side charger? I designed a carriage that slides into the front of the upper using the same slots that the OEM CH uses at the back. Then a stud inserts from the side and is held with set screws. Obviously, this requires cutting a slot into the side of the upper. It also requires removing the upper "ears" on the barrel trunion inside, but they don't do anything so no big deal. They're just left over from the CMR I think. It's non-reciprocating and the handle could be mounted on either side & the whole thing works with or without the OEM CH in place. This was is an early design I had 3D printed in aluminum. I've since tweaked it quite a bit & I'm working on a folding handle for it as well.  
|
|
|
|
Posted: 4/25/2021 10:39:33 AM EDT
[#49]
Quote HistoryOriginally Posted By houlster: I designed a carriage that slides into the front of the upper using the same slots that the OEM CH uses at the back. Then a stud inserts from the side and is held with set screws. Obviously, this requires cutting a slot into the side of the upper. It also requires removing the upper "ears" on the barrel trunion inside, but they don't do anything so no big deal. They're just left over from the CMR I think. It's non-reciprocating and the handle could be mounted on either side & the whole thing works with or without the OEM CH in place. This was is an early design I had 3D printed in aluminum. I've since tweaked it quite a bit & I'm working on a folding handle for it as well. https://lh3.googleusercontent.com/RS0YC_TKzf7-j-d2mNCaGgIIq-2qpz8_v5eR9pH_ajnREFEz4i23iJ0WNIVjGOlUKNNJnniqN0KH-9lIeqE=w1000 https://lh3.googleusercontent.com/ItiVBFGk9Dd_FEkksm9_Avn4xO5ZUD1S2wbXuLZ3VWwjxxNBM37uYmzyROZilcdo8kvS_vZb9qmeTftlrGE=w1000 Quote HistoryOriginally Posted By houlster: Originally Posted By nottooslow: that's badass, any more pics / info on the side charger? I designed a carriage that slides into the front of the upper using the same slots that the OEM CH uses at the back. Then a stud inserts from the side and is held with set screws. Obviously, this requires cutting a slot into the side of the upper. It also requires removing the upper "ears" on the barrel trunion inside, but they don't do anything so no big deal. They're just left over from the CMR I think. It's non-reciprocating and the handle could be mounted on either side & the whole thing works with or without the OEM CH in place. This was is an early design I had 3D printed in aluminum. I've since tweaked it quite a bit & I'm working on a folding handle for it as well. https://lh3.googleusercontent.com/RS0YC_TKzf7-j-d2mNCaGgIIq-2qpz8_v5eR9pH_ajnREFEz4i23iJ0WNIVjGOlUKNNJnniqN0KH-9lIeqE=w1000 https://lh3.googleusercontent.com/ItiVBFGk9Dd_FEkksm9_Avn4xO5ZUD1S2wbXuLZ3VWwjxxNBM37uYmzyROZilcdo8kvS_vZb9qmeTftlrGE=w1000 That is cool, thanks for the info. |
|
|
|
|
Posted: 5/7/2021 12:14:36 PM EDT
[#50]
Quote HistoryOriginally Posted By vengarr: I love my sbr cp33, but I am having failures to feed even using the nest loader. https://www.AR15.Com/media/mediaFiles/74310/FB_IMG_1608317543013-1747287.jpg Are you using the farrowtech brace? I ask as yours looks a bit longer then normal. |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
