User Panel
Posted: 1/22/2019 4:18:17 PM EDT
[Last Edit: Trunkmonkey4]
|
|
|
Originally Posted By seattlite: This light lines up with the trigger guard...but not sure I like that gap: https://lh3.googleusercontent.com/pw/ACtC-3dzAqtQzhvSQTY506ORjq-T6ruB1QKoOSw-YCpq7tg9PWTnXPB9Nf1z9vA2_mx1yLcuBV2s7qpeWB5ABYeXq41Jr9dK2bygyLqwWXZXsk5ZL62PAaOtUV_LZkqvx1dOEvCgrJNvyza3aHPdfgSR00AzCQ=w1251-h938-no View Quote Sprayfoam should fix it. |
|
Married the most eligible woman on ARFCOM. https://www.ar15.com/forums/t_1_5/2338223_Preban-mags-to-Massachusetts-thread-show-us-your-dirty-naughty-Orlites-.html
|
I ordered one of these the other day. I'm tempted to SBR it to fit my "MP7" fantasies.
|
|
|
|
Originally Posted By Outrider: I ordered one of these the other day. I'm tempted to SBR it to fit my "MP7" fantasies. View Quote rhey shoot ALL DAY....just gitts clean the 22 gunk every few hundo rnds if u suppress it....and u should |
|
|
|
|
Here is a link to a rail adaptor for the CP33
REHV Arms CP33 Adaptor Here is a link for a telescoping brace for the CP33 KelTec CP33 Telescoping Brace Adapter These are pretty much the only ones available unless you want to 3D print your own adaptor. |
|
DAV lifetime member
NRA Patriot Life Benefactor |
Originally Posted By chumpmiester: Here is a link to a rail adaptor for the CP33 REHV Arms CP33 Adaptor Here is a link for a telescoping brace for the CP33 KelTec CP33 Telescoping Brace Adapter These are pretty much the only ones available unless you want to 3D print your own adaptor. View Quote Yep. Pretty sure the above photo is using the Rehv one. I'm going to snag one when they come back in stock. Figuring out a stock situation is what I'm mulling over now. |
|
|
|
|
DAV lifetime member
NRA Patriot Life Benefactor |
Originally Posted By seattlite: Prior to getting the Farrowtech tele brace adapter, I got one one of the Rehv Arms adapters when they first came out. I did a fit/function test with a sig brace I had laying around. I prefer the Farrowtech. My OCD bothered me that the Sig Brace interface would not align with the top of the Rev Arms adapter. If I moved the Sig Brace one more notch up, the top of the brace's picatinny interface would interfere with the CP33 charging handle. https://lh3.googleusercontent.com/pw/ACtC-3fj4rzCnyLPhWcUfqPDpKkAcghzNYLlYas_nKciT8E6W539KpDfIM5BbBcr6cfM94q0yGj-y-LX9YpBxCiesE8tKTEC-j5XJ1R_wn_27gmEjRV8gHR37IU-UtG-VyYiWBna_sKo1cGTjPxUWIVd8GWWdw=w1606-h1205-no https://lh3.googleusercontent.com/pw/ACtC-3f8bpmmOJ5pewTP5IrxpxSf0cVcWiycvAlKsqiWEivVLhMLzBvU5T1nRLepegePxhUi_Xczav_bDnLVaVT1IWZCfRygsJOKQZTuhfhP1oCmw-n0nWCEXCMaFb_oG8XIYShZuXOXB8uHatKUinsMGTDixw=w1606-h1205-no View Quote That does mess with my OCD a little bit too. I'm just not a brace guy though. Maybe I could do a stock with Farrowtech's system. |
|
|
|
|
Is anyone making a quality holster for the cp33 yet?
|
|
“No free man shall ever be debarred the use of arms." - Thomas Jefferson
|
There are a few holsters available. I'm trying to find a good one with a cutout for a micro reflex/red dot sight.
|
|
DAV lifetime member
NRA Patriot Life Benefactor |
Had mine out today again.
Great trigger, accurate and reliable. I did have one failure to fire, followed by a mis feed in one in my 5 mags. 4 mags went 30/30 and that last mag went 28/30. I am trying to keep that mag in mind to see if it could be mag related. Shot some NOS Federal walmart bulk. |
|
O.K....I sold all my HKs, but I have to keep my Identity!
|
IG @ou7rider
|
Looks good!
|
|
O.K....I sold all my HKs, but I have to keep my Identity!
|
Hey all - good news, Kel Tec just came out with the +17 magazine extension, so y'all are up to 50 rounds per mag now if you want it!
|
|
|
O.K....I sold all my HKs, but I have to keep my Identity!
|
Extensions and a larger paddle style mag release, and I'll be good to go.
|
|
|
250 rounds through the new 50 round magazine, zero issues of any kind using Remington Thunderbolt.
|
|
|
07/02 manufacturer and dealer. I believe we should all be heavily armed, let me help you get there!
|
Originally Posted By vengarr: I love my sbr cp33, but I am having failures to feed even using the nest loader. https://www.AR15.Com/media/mediaFiles/74310/FB_IMG_1608317543013-1747287.jpg View Quote What ammo you having issues with? |
|
O.K....I sold all my HKs, but I have to keep my Identity!
|
Originally Posted By HK_DUDE: What ammo you having issues with? View Quote View All Quotes View All Quotes Originally Posted By HK_DUDE: Originally Posted By vengarr: I love my sbr cp33, but I am having failures to feed even using the nest loader. https://www.AR15.Com/media/mediaFiles/74310/FB_IMG_1608317543013-1747287.jpg What ammo you having issues with? Everything i have tried. |
|
07/02 manufacturer and dealer. I believe we should all be heavily armed, let me help you get there!
|
How do people like thei Farrowtech braces? Debating between the Farrowtech and the Rehv Arms adapter with a side folding brace.
|
|
|
I like the farrow tech. The only thing I don't like is that it will flex.
|
|
|
07/02 manufacturer and dealer. I believe we should all be heavily armed, let me help you get there!
|
I broke mine cp33 down and scrubbed it and cleaned it to pristine. While i was cleaning the bore I foubd a small burr on the ramped part of the chamber. Let's see if that fixes it.
|
|
07/02 manufacturer and dealer. I believe we should all be heavily armed, let me help you get there!
|
Originally Posted By vengarr: They are hollow. I wonder if a piece of al rod will stiffent it up. View Quote View All Quotes View All Quotes Originally Posted By vengarr: Originally Posted By sh1fty: I like the farrow tech. The only thing I don't like is that it will flex. They are hollow. I wonder if a piece of al rod will stiffent it up. That's a good idea - I'll eyeball it this weekend |
|
|
Originally Posted By vengarr: I broke mine cp33 down and scrubbed it and cleaned it to pristine. While i was cleaning the bore I foubd a small burr on the ramped part of the chamber. Let's see if that fixes it. View Quote Update? @vengarr Mine chokes when it gets dirty after a couple hundred CCI Standards, all suppressed. |
|
Words fall from your mouth like shit from ass.
|
I found one.
At msrp even. Think I'll grab it. |
|
|
|
Originally Posted By Steamedliver: Update? @vengarr Mine chokes when it gets dirty after a couple hundred CCI Standards, all suppressed. View Quote View All Quotes View All Quotes Originally Posted By Steamedliver: Originally Posted By vengarr: I broke mine cp33 down and scrubbed it and cleaned it to pristine. While i was cleaning the bore I foubd a small burr on the ramped part of the chamber. Let's see if that fixes it. Update? @vengarr Mine chokes when it gets dirty after a couple hundred CCI Standards, all suppressed. Still runs like shit. |
|
07/02 manufacturer and dealer. I believe we should all be heavily armed, let me help you get there!
|
Question for the guys running optics. What height works well when braced? Standard AR heights looks like they might be too tall.
|
|
|
Well, isn't this a fine kettle of fish.
|
Finally bit the bullet and ordered one. With that fucking pedophile in office, shits not getting cheaper.
|
|
|
mag extensions currently in stock. Apparently they restock Tuesdays and Thursdays at 2:00 pm EST
https://www.keltecweapons.com/product/cp33-17-magazine-extension/ |
|
|
Originally Posted By nottooslow: mag extensions currently in stock. Apparently they restock Tuesdays and Thursdays at 2:00 pm EST https://www.keltecweapons.com/product/cp33-17-magazine-extension/ View Quote Awesome thanks ordered a couple. |
|
Life expectancy would grow by leaps and bounds if green vegetables smelled as good as bacon.
|
|
Originally Posted By evnash: New toy. Budget red dot , stippled grip, safety, charging handle. Next will be a fs1913 folding brace. Also made a Kydex owb holster that uses a combat loop for belt attachment. Print is black leather look. For the grip stipple, I only stippled the raised squares but I continued the squares on the front and back strap. https://www.AR15.Com/media/mediaFiles/222048/0B83838F-220F-48EF-B56E-2A0C472E594D_jpe-1287128.JPG https://www.AR15.Com/media/mediaFiles/222048/B81F73AB-1FAF-46B6-8FB8-3BA86CF803BF_jpe-1287126.JPGhttps://www.AR15.Com/media/mediaFiles/222048/A3EF362F-0C67-4594-90FE-E5BED63BAB11_jpe-1287127.JPG View Quote @evnash can you see the regular sights through the trs? It was the only red dot I could think of that might be a possibility. |
|
|
|
"Government is like a baby. An alimentary canal with a big appetite at one end and no sense of responsibility at the other."
Ronald Reagan |
Originally Posted By houlster: My SBR... The CGS is for show. I have a Sparrow that I actually use with it. Mine has been very reliable. About 700 rnds through it now. Maybe a couple mag related stoppages is all. https://lh3.googleusercontent.com/yGVRAjZW53W1Oqt0DfEUJVi6Zc0QQAJxxdFBOXQ9hO0Z8ZcDpKk55uwTGVEk2fkXGy2nkWH5MxGRg_f4Rug=w1000 https://lh3.googleusercontent.com/yzw27vzuYWHA0EI7XkulfWQEr6WKMU_Qbr9vciLGKsgicZhvLY43uoqtkuxIg8Yt-DFFCeUjF4mmQ6y5l2g=w1000 https://lh3.googleusercontent.com/zAyGokROyZYGuIO32j-xFWqJjCyJjGswDHxwjeZKX2No4LDfJZ1AnJYcK2Qi7kfuBei7nBuXFx147B3l45c=w1000 View Quote Nice. Where did you get the stock/adapter? |
|
|
|
Originally Posted By houlster: My SBR... The CGS is for show. I have a Sparrow that I actually use with it. Mine has been very reliable. About 700 rnds through it now. Maybe a couple mag related stoppages is all. https://lh3.googleusercontent.com/yGVRAjZW53W1Oqt0DfEUJVi6Zc0QQAJxxdFBOXQ9hO0Z8ZcDpKk55uwTGVEk2fkXGy2nkWH5MxGRg_f4Rug=w1000 https://lh3.googleusercontent.com/yzw27vzuYWHA0EI7XkulfWQEr6WKMU_Qbr9vciLGKsgicZhvLY43uoqtkuxIg8Yt-DFFCeUjF4mmQ6y5l2g=w1000 https://lh3.googleusercontent.com/zAyGokROyZYGuIO32j-xFWqJjCyJjGswDHxwjeZKX2No4LDfJZ1AnJYcK2Qi7kfuBei7nBuXFx147B3l45c=w1000 View Quote that's badass, any more pics / info on the side charger? |
|
|
Originally Posted By houlster: The stock is from a B&T USW. The adapter, AFG & latch are all 3D print designs I made. View Quote View All Quotes View All Quotes Originally Posted By houlster: Originally Posted By seattlite: Nice. Where did you get the stock/adapter? The stock is from a B&T USW. The adapter, AFG & latch are all 3D print designs I made. NICE!!! |
|
|
Originally Posted By houlster: I designed a carriage that slides into the front of the upper using the same slots that the OEM CH uses at the back. Then a stud inserts from the side and is held with set screws. Obviously, this requires cutting a slot into the side of the upper. It also requires removing the upper "ears" on the barrel trunion inside, but they don't do anything so no big deal. They're just left over from the CMR I think. It's non-reciprocating and the handle could be mounted on either side & the whole thing works with or without the OEM CH in place. This was is an early design I had 3D printed in aluminum. I've since tweaked it quite a bit & I'm working on a folding handle for it as well. https://lh3.googleusercontent.com/RS0YC_TKzf7-j-d2mNCaGgIIq-2qpz8_v5eR9pH_ajnREFEz4i23iJ0WNIVjGOlUKNNJnniqN0KH-9lIeqE=w1000 https://lh3.googleusercontent.com/ItiVBFGk9Dd_FEkksm9_Avn4xO5ZUD1S2wbXuLZ3VWwjxxNBM37uYmzyROZilcdo8kvS_vZb9qmeTftlrGE=w1000 View Quote View All Quotes View All Quotes Originally Posted By houlster: Originally Posted By nottooslow: that's badass, any more pics / info on the side charger? I designed a carriage that slides into the front of the upper using the same slots that the OEM CH uses at the back. Then a stud inserts from the side and is held with set screws. Obviously, this requires cutting a slot into the side of the upper. It also requires removing the upper "ears" on the barrel trunion inside, but they don't do anything so no big deal. They're just left over from the CMR I think. It's non-reciprocating and the handle could be mounted on either side & the whole thing works with or without the OEM CH in place. This was is an early design I had 3D printed in aluminum. I've since tweaked it quite a bit & I'm working on a folding handle for it as well. https://lh3.googleusercontent.com/RS0YC_TKzf7-j-d2mNCaGgIIq-2qpz8_v5eR9pH_ajnREFEz4i23iJ0WNIVjGOlUKNNJnniqN0KH-9lIeqE=w1000 https://lh3.googleusercontent.com/ItiVBFGk9Dd_FEkksm9_Avn4xO5ZUD1S2wbXuLZ3VWwjxxNBM37uYmzyROZilcdo8kvS_vZb9qmeTftlrGE=w1000 That is cool, thanks for the info. |
|
|
Originally Posted By vengarr: I love my sbr cp33, but I am having failures to feed even using the nest loader. https://www.AR15.Com/media/mediaFiles/74310/FB_IMG_1608317543013-1747287.jpg View Quote Are you using the farrowtech brace? I ask as yours looks a bit longer then normal. |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.