My CM came in the tactical configuration with the compensator separate in the case.
My question is do I just screw the comp down tight so that it bottoms on the threads?
I have to really reef it down to get the flats to line up on the slide. If I leave it one thread out, the lock-up cone is not engaged.
It seems mechanically insensitive to bind up the threads like that. There should be a ledge or a crush washer or something...
Posted: 4/27/2020 4:25:30 PM EDT
[#1]
yep, most new ones have a threaded interference fit. Certainly not my favorite solution, but it does work so I can't say it's necessarily "wrong", just not really enjoyable to take apart/put back together.
Posted: 4/27/2020 5:04:15 PM EDT
[#2]
Tighten it all the way if you can, until its torqued and timed correctly. It’s not uncommon for open gun comps to come loose.
Posted: 4/27/2020 7:42:51 PM EDT
[#3]
screw it down until it lines up with the slide....you may have a very tiny space
It will not come loose as the guide rod holds it in place