I purchased a PF940v2 frame, G17 threaded barrel, and G17 slide from different dealers. Unfortunately, it doesn't look like they all will fit together. Before I start drilling the frame, I'd like to figure out which part is off, or maybe I'm looking looking at it wrong.
Slide length measures 7 3/16"
Barrel is 4 1/2" from muzzle cap to end of breech, 3 1/8" to front of breech
Frame is 7 1/2" along where the slide mates with it
The first issue I saw was the slide being approx 5/16" shorter than the frame. Second issue was the threaded barrel does not protrude through the front of the slide enough to actually attach something to the threads. The frame comes in a jig that states PF940v2, so that seems to be correct. The barrel says G17 on the breech. The slide says G17 on the packaging it came with. So I am stumped. Anyone have measurements these parts should be, so I can maybe narrow down which part is off?
Attached File Attached File Attached File