User Panel
Posted: 1/25/2014 11:51:31 AM EDT
The front sight tool is only $10 so no big deal, but the rear sight tool can be upwards of $125.
Hate spending $100+ for a tool that gets used once. Many dealers selling the sights will do the work for free, but that is $15 shipping each way for the slide. Ok, so that is $30 just for shipping of that $100+ so really only losing out on about $70+, but still a good chunk of change. Who else has a HUGE box of parts and tools they only used once? Although I hate to do it I may spend the cash as the tool "may" be useful if slight adjustments need to be made. Anyone buy the tool and wish they opted to just send in the slide? Anyone send in their slide and which they opted to just buy the tool? |
|
My local gun shop installs any sights I order through them for free. See if you have any in your AO that do the same. If not, I would send it out
|
|
Just buy the MGW sight pusher or find a local store or Glock Armorer to do it for free.
|
|
Get the sight tool. You will need it more than once over time trust me.
|
|
If you have a vise, all you need is a hammer and a brass punch.
|
|
Since posting I have been searching some more and found this.
Only $100 and can get a package deal when buying sights which saves $14. So, the $14 I save goes toward the $100 which gets me down to only spending $86, but then save $15 each way and now only spending $56. Hmmm, it may not be as bad as I thought. These are the silly mind games I play to justify buying stuff. |
|
Quoted:
If you have a vise, all you need is a hammer and a brass punch. View Quote Yep. A file can also help if you need to file the bottom of the sight, etc. Go to Dawson Precision's youtube videos where he has videos on changing out glock sights with a vise, hammer, and punch. Dawson precision also sells plastic tipped punches, files, etc for sight install. No reason at all to invest in sight tool. |
|
Quoted: Yep. A file can also help if you need to file the bottom of the sight, etc. Go to Dawson Precision's youtube videos where he has videos on changing out glock sights with a vise, hammer, and punch. Dawson precision also sells plastic tipped punches, files, etc for sight install. No reason at all to invest in sight tool. View Quote View All Quotes View All Quotes Quoted: Quoted: If you have a vise, all you need is a hammer and a brass punch. Yep. A file can also help if you need to file the bottom of the sight, etc. Go to Dawson Precision's youtube videos where he has videos on changing out glock sights with a vise, hammer, and punch. Dawson precision also sells plastic tipped punches, files, etc for sight install. No reason at all to invest in sight tool. |
|
How many Glock's do you have? How many of the others that shoot with you also have Glock's? We have several, several of the people that we shoot with have Glock's so it was worth me getting the 'proper' tools to help maintain them. The cost is worth not having your guns up an running.
|
|
Ok, just found this which may be a better way to go.
|
|
Get the straight edge MGW sight tool. You'll be able to fine tune adjustments easily and the thing makes sight install easy
|
|
I just went through the same thing, I opted to order the tool. I'm glad I did, when I buy another Glock in the future I will likely upgrade the sights. I also have friends that have Glocks
|
|
Quoted:
Get the straight edge MGW sight tool. You'll be able to fine tune adjustments easily and the thing makes sight install easy View Quote This is what I have, works on straight sided sights or angle. Use heat shrink on tool or a piece of business card between tool and angle sights as to not leave a mark. |
|
Quoted:
Get the straight edge MGW sight tool. You'll be able to fine tune adjustments easily and the thing makes sight install easy View Quote Read a number of reviews on the MGW tool and nothing but good reviews. I think I will opt for the tool I posted above since it is more of a universal tool and could use it on a few other pistols. |
|
View Quote Let us know how this works. For the price, it seems like the logical solution. |
|
My LGS charged $30.00 to install nights sights on my G21 AND they lubed it when they were done with it.
Can't hardly beat that price for having somebody who knows what he's doing install it. |
|
Ask in your HTF. Chances are good someone local can help you out.
|
|
I've bought two MGW tools over the years and sold both. I'm about to buy my third. Do yourself a favor and just buy the tool and hold on to it. Its a good investment. But like someone else mentioned, try your hometown forum and see if anyone local has one. It only takes a few minutes to do.
|
|
|
|
Quoted:
This. I've done many this way and all turned out nice. View Quote View All Quotes View All Quotes Quoted:
Quoted:
If you have a vise, all you need is a hammer and a brass punch. Just put a set of dawson on mine and they went in no problem with the tool they include,no need for a sight pusher tool. |
|
Quoted:
Just put a set of dawson on mine and they went in no problem with the tool they include,no need for a sight pusher tool. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
If you have a vise, all you need is a hammer and a brass punch. Just put a set of dawson on mine and they went in no problem with the tool they include,no need for a sight pusher tool. Me too. Bent the tool. It took a long while and thinking the slide may have a slight issue. Trying to avoid this again as I plan to replace some sights on a few items. I think a universal tool may help prevent future headaches. |
|
|
Quoted:
That's what I did. Installed Night sights for $57 and shipped back in brand new Glock case. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Send the slide to Glock directly. That's what I did. Installed Night sights for $57 and shipped back in brand new Glock case. How can you beat that? |
|
Perhaps I'm just a caveman....but I've never needed anything but a small hammer and a wooden dowel.
|
|
I ordered two sets of Glock night-sights from GT Distributing(like $114 +freight)...bought a deep 3/16" socket at NAPA and ground it thin for a front sight tool(about $9)...used a poly finger from a John Deere 930 header auger for a rear sight tool(punch).
Some loc-tite and twenty minutes and I had night sights on two Glocks. |
|
|
|
DIY using a clamp used to attach a cab to a truck bed
http://www.triangletactical.net/2012/05/02/diy-glock-sight-pusher/ C-clamps from your local hardware store 3 2" clamps and 1 1" clamp. For the piece that actually pushes the sight, you could cut the foot off of it and make the tip look like the one in the first link. https://www.youtube.com/watch?v=VVObCaoF260 |
|
Front sight , just hit it with a Dremel or grinder to make the diameter more narrow at the tip.
For the rear sight, use a Delrin or brass punch and a hammer. |
|
I have several Glocks, and I never keep the stock sights on them, so for me it was worth getting the rear sight tool. My friends and family bring their Glocks to me to change their rear sight for them. Guess it depends on your situation on whether or not it is worth it. If you just have one glock and never plan to have any others, the I guess it would be tough to justify.
|
|
|
I've done the hammer/punch thing on a LOT of my handguns, but recently I found out one of my LGS has an MGW Glock sight tool I can use for free (angled version). I tried it with a set of suppressor sights and I was impressed with how simple and fast it was. So much so that I'm ordering one for myself (LGS is a 20 minute drive, one way ).
|
|
|
Quoted:
Sorry for the silly question but what is a brass punch? Is it a punch made out of brass so it is softer than steel? Thanks View Quote View All Quotes View All Quotes Quoted:
Quoted:
If you have a vise, all you need is a hammer and a brass punch. Sorry for the silly question but what is a brass punch? Is it a punch made out of brass so it is softer than steel? Thanks yes. you can also get plastic tipped punches as well. |
|
Quoted:
Sorry for the silly question but what is a brass punch? Is it a punch made out of brass so it is softer than steel? Thanks View Quote View All Quotes View All Quotes Quoted:
Quoted:
If you have a vise, all you need is a hammer and a brass punch. Sorry for the silly question but what is a brass punch? Is it a punch made out of brass so it is softer than steel? Thanks Exactly that. I used a brass punch and a hammer on one I did. Came out good. |
|
|
Quoted:
The front sight tool is only $10 so no big deal, but the rear sight tool can be upwards of $125. Hate spending $100+ for a tool that gets used once. Many dealers selling the sights will do the work for free, but that is $15 shipping each way for the slide. Ok, so that is $30 just for shipping of that $100+ so really only losing out on about $70+, but still a good chunk of change. Who else has a HUGE box of parts and tools they only used once? Although I hate to do it I may spend the cash as the tool "may" be useful if slight adjustments need to be made. Anyone buy the tool and wish they opted to just send in the slide? Anyone send in their slide and which they opted to just buy the tool? View Quote Do you have a small frame or large frame Glock? If it's a small frame, I'll send you my OEM Glock rear sight tool and a front sight tool. Just send it back when you're done. Send me a note if you're interested. If you plan on adding Glocks, invest in the MGW tool for both small/large frames. You'll never look back. |
|
i was gonna buy the tool until i went too my LGS and he has a sight pusher i just install the front with the tool and he installs the rear for 10 bucks. i tried do it myself and ruined 3 rear sights using a steele punch and rubber mallet.
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.