Quoted: Hey guys...I am thinking about putting a Romy sidefolder on my WASR...a couple of questions...
Where's the best place to get a side-folder & how much$$$?
How hard is it to get the woodie off (unfortunate wording here)?
What hardware is needed to install the sidefolder (what kid of screws or whatever)? Thanks to the kind soul who has info...
|
I bought mine from
www.k-var.com for $60.
But I think
www.gunsnstuffonline.com/ has them for less.
To remove the wood stock on the Wasr, I prefer the dirty laundry bag technique...
1.
Make sure firearm is unloaded. 2. Disassemble firearm (Top cover, bolt, bolt carrier, recoil spring)
3. Remove 2 screws that screw the wood stock in.
4. Find a full laundry bag, preferably dirty laundry, you can substitute your bed, couch (don't let the wife, girlfriend, significant other see you), padded carpeted stairwell, etc.
5. Grasp gun by barrel.
6. Beat all four sides of the butstock alternately on laundry bag, bed, couch, padded stairwell, etc. You will here a slapping sound if you are doing it right.
7. Stock will wiggle off.
8. Drink beer.
Once the screws are removed, if you have workshop, you could also put the gun in a padded vice and use a rubber mallet to knock on all four sides of the butstock to get it off. But I find the laundry bag technique is easier.
To install the Romanian stock...
1. Slide the stock into the receiver.
2. Tighten 2 screws.
3. Drink beer.
Edited for grammer, sum spelling, and alcohol use.