User Panel
No, my name has nothing to do with enemas.
MO, USA
|
|
AK building addict in recovery.
|
Inside look at the new rifle and the KC plant:
Episode 173. AK-12. The new Kalashnikov |
|
|
Man what a cool gun, I hope someday we will be able to buy these in America... probably never going to happen but man would it be cool.
|
|
|
Originally Posted By AEnemaBay: No. Apparently they were only made for the Ratnik trials as it was decided to drop them from general production. I'm working with someone to possibly recreate them on a very limited scale. View Quote I’d really like to get ahold of one of the AK19 pistol grips with integrated trigger guard. Any chance your source could recreate that? |
|
|
Needs subtitles.
Both show in-depth of field strip and receiver markings. One dewat and one converted to blanks. ????? ?????????? ??-12. ????????? ?????. ?????????? ? ??????? ??????????? ??-12. ????????. ??? ???????? ??????? ?? ??? ???????? |
|
|
Now your AK12 can be Zenitco accessorized.
Custom modded AK-12: Sport-12 and Sport-12U kits |
|
|
No, my name has nothing to do with enemas.
MO, USA
|
Originally Posted By Melvin_Johnson: Now your AK12 can be Zenitco accessorized. https://www.youtube.com/watch?v=okmvdQ5QOQk View Quote Already ordered one. Also have an MLOK rail on the way with a different adjustable gas plug. |
AK building addict in recovery.
|
|
Originally Posted By Melvin_Johnson: Now your AK12 can be Zenitco accessorized. https://www.youtube.com/watch?v=okmvdQ5QOQk View Quote I just can't get on board with this. Might be functional, but aesthetically, it doesn't do it for me. Incidentally, if anyone wants the measurements for the KC's unique QD system, feel free to message me. I picked up a set and they are (as mentioned earlier in this thread) different from the US standard. |
|
|
Originally Posted By AEnemaBay: I feel the same too about the looks. But it also looks very... Russian... to me. I'll be putting it on my AK-15. The MLOK one that's on the way is much more aesthetically pleasing (to me) and will go on the AK-12: https://i.imgur.com/oHlPBki.jpg View Quote Its interesting, and reminds me of some of the older SMG rails from a decade ago. Can't argue with you on the Russian look to it. They give zero-fucks as to what I find pleasing, and are usually utilitarian. Speaking of your picture: One of the things that I wondered, is why they never went with a iron sight system that would co-witness with the western standard optics they love to run. I like your solution to the problem, but wish we had a FSB/GB with a higher post height. |
|
|
No, my name has nothing to do with enemas.
MO, USA
|
Originally Posted By BlgSal: Its interesting, and reminds me of some of the older SMG rails from a decade ago. Can't argue with you on the Russian look to it. They give zero-fucks as to what I find pleasing, and are usually utilitarian. Speaking of your picture: One of the things that I wondered, is why they never went with a iron sight system that would co-witness with the western standard optics they love to run. I like your solution to the problem, but wish we had a FSB/GB with a higher post height. View Quote Oh, that's not my rifle. I was just showing the rail. The AK-12 FSB is already taller than standard. It would have to be almost comically tall to work with optics that would mount to the rail. |
AK building addict in recovery.
|
Originally Posted By AEnemaBay: Oh, that's not my rifle. I was just showing the rail. The AK-12 FSB is already taller than standard. It would have to be almost comically tall to work with optics that would mount to the rail. View Quote It would make sense to have it tall enough to co-witness with an eotech or 1P87 or something similar would be what I would say. Right now, the system would co witness great with a micro dot (aimpoint or clone), but not the standard western gear or even much of the Russian/Belarusian optics I see coming out. |
|
|
I really wish someone like Zastava, EAA, could import AK-12 semi components into Turkey, Serbia, repackage them and ship them to the US. EAA imported Saigas originally. There has to be a way around the export rules. Mark the rifles “made in Serbia” etc
|
|
|
Originally Posted By themao: I really wish someone like Zastava, EAA, could import AK-12 semi components into Turkey, Serbia, repackage them and ship them to the US. EAA imported Saigas originally. There has to be a way around the export rules. Mark the rifles “made in Serbia” etc View Quote Armenia reportedly makes the AK12 under license. Is there any embargo on place for Armenia? |
|
|
It is pretty slick looking! I wonder if there will be aftermarket support for it from US vendors.
|
|
|
No, my name has nothing to do with enemas.
MO, USA
|
Originally Posted By BlgSal: It is pretty slick looking! I wonder if there will be aftermarket support for it from US vendors. View Quote I've asked Ivan Tactical and 4Shooters to stock them since they're LAC dealers. 4Shooters already has the gas plug so I imagine they're waiting on stock for the rail. |
AK building addict in recovery.
|
Wow, that is a sexy rifle
|
|
|
Originally Posted By AEnemaBay: I've asked Ivan Tactical and 4Shooters to stock them since they're LAC dealers. 4Shooters already has the gas plug so I imagine they're waiting on stock for the rail. View Quote I've dealt with both over the years. Thanks for putting in the leg-work! I actually like the fact it keeps the top rail consistent with the dustcover (unlike the zenitco offering which just looks stupid, and ruins the aesthetic). I haven't seen the one that SAG is testing yet, but that one will also keep the top rail apparently. |
|
|
I kind of like the looks of the Zenitco forend. At least the version that stops at the front sight base.
|
|
|
No, my name has nothing to do with enemas.
MO, USA
|
|
AK building addict in recovery.
|
Originally Posted By AEnemaBay: The biggest advantage of the Vector gas plug is that it's toolless, but not as precise and it's a bit loose in the gas block. The LAC fits the gas block snugly and has finer adjustments, but requires a hex wrench to adjust. Both are very well made. https://i.imgur.com/wv9YzZWl.jpg https://i.imgur.com/be2grsZl.jpg https://i.imgur.com/JEwU1Eql.jpg View Quote do they have a gas plug that works on an AK-74? TY |
|
“Now I will tell you the answer to my question. It is this. The Party seeks power entirely for its own sake..." - George Orwell, 1984
|
No, my name has nothing to do with enemas.
MO, USA
|
|
AK building addict in recovery.
|
The LAC handguard looks like a really nice and functional upgrade. The Zenitco AK-12 handguard may be functional but it kind of missed the mark on aesthetics.
|
|
|
“Now I will tell you the answer to my question. It is this. The Party seeks power entirely for its own sake..." - George Orwell, 1984
|
Originally Posted By heron163: should have clarified to state a front gas block assembly that will replace the original and offer a removable plug... not having much luck from the first place I ordered from... View Quote View All Quotes View All Quotes Originally Posted By heron163: Originally Posted By AEnemaBay: No. The AK-74 doesn't have a provision for a removable gas plug. should have clarified to state a front gas block assembly that will replace the original and offer a removable plug... not having much luck from the first place I ordered from... I think LAC does make some, but they install with set screws iirc. Attached File It isnt elegant, but you can always torque those things down and put a pin through it. Does anyone make something similar that needs to be pressed on/pinned? |
|
|
I recently picked up an AK12 kit, and for the welding a new trunnion to the gas tube retainer block part thingy, who did you send it to? My kit is still welded to the original (unfortunately demilled) trunnion, and I'm hesitant to just start milling and welding away.
|
|
|
Is that ruskie that was doing the lord's work get released from Russian prison?
Can I still get an AK-12 kit? |
|
|
Originally Posted By JoEnge1136: I recently picked up an AK12 kit, and for the welding a new trunnion to the gas tube retainer block part thingy, who did you send it to? My kit is still welded to the original (unfortunately demilled) trunnion, and I'm hesitant to just start milling and welding away. View Quote @JoeEnge1136 Where did you get the kit? |
|
|
No, my name has nothing to do with enemas.
MO, USA
|
Originally Posted By JoEnge1136: I recently picked up an AK12 kit, and for the welding a new trunnion to the gas tube retainer block part thingy, who did you send it to? My kit is still welded to the original (unfortunately demilled) trunnion, and I'm hesitant to just start milling and welding away. View Quote I had M13 Industries weld mine. I didn't trust myself to do it since I don't have a tig welder yet. |
AK building addict in recovery.
|
|
Originally Posted By AEnemaBay: I had M13 Industries weld mine. I didn't trust myself to do it since I don't have a tig welder yet. View Quote View All Quotes View All Quotes Originally Posted By AEnemaBay: Originally Posted By JoEnge1136: I recently picked up an AK12 kit, and for the welding a new trunnion to the gas tube retainer block part thingy, who did you send it to? My kit is still welded to the original (unfortunately demilled) trunnion, and I'm hesitant to just start milling and welding away. I had M13 Industries weld mine. I didn't trust myself to do it since I don't have a tig welder yet. Thanks, I'll keep that in mind for when I decide what caliber I actually want to build it in. |
|
|
I got a hold of my kit and I'm missing some things that I was told it came with. A trigger group pin, the lower handguard pin and the safety selector. I'm fairly certain that the trigger pin (my kit came with one and was shown with two) isn't a big deal and the handguard retainer pin can be swapped with a 7mm stock pin, but how fucked am I without the selector? I messaged the seller (who is based in the US) but if I don't hear back from him I'm not sure what I'm going to do. A few Russian websites list parts like trigger group pins and retainer pins, but I can't find anyone selling the AK12 selector levers themselves.
|
|
|
No, my name has nothing to do with enemas.
MO, USA
|
Originally Posted By JoEnge1136: I got a hold of my kit and I'm missing some things that I was told it came with. A trigger group pin, the lower handguard pin and the safety selector. I'm fairly certain that the trigger pin (my kit came with one and was shown with two) isn't a big deal and the handguard retainer pin can be swapped with a 7mm stock pin, but how fucked am I without the selector? I messaged the seller (who is based in the US) but if I don't hear back from him I'm not sure what I'm going to do. A few Russian websites list parts like trigger group pins and retainer pins, but I can't find anyone selling the AK12 selector levers themselves. View Quote You shouldn't be screwed if you don't get an AK-12 specific selector. You should be able to use a standard selector or something like a Krebs without issue. AK-12 selectors do show up on the Files sometimes. |
AK building addict in recovery.
|
Originally Posted By AEnemaBay: You shouldn't be screwed if you don't get an AK-12 specific selector. You should be able to use a standard selector or something like a Krebs without issue. AK-12 selectors do show up on the Files sometimes. View Quote I did find a Russian website that sells the parts I am missing so crisis averted if the guy doesn't have the parts he promised me. What did you guys do about the bump rivet? I know most people wouldn't know but it would drive me up the wall visually if it doesn't look right. I was thinking of buying a bump rivet off russtock and copying the hole over to the new trunnion when I get it welded for the gas tube. |
|
|
Any new information on rusguns guy? What about the receivers from the guy thats more accurate( recreator) was it? And barrels? How do I get in touch with either of these gentlemen?
Thanks |
|
|
Some random dude off the YouTube with his AK12
The AK-12: Russia’s New Combat Rifle |
|
|
Originally Posted By LawDog205: Any new information on rusguns guy? What about the receivers from the guy thats more accurate( recreator) was it? And barrels? How do I get in touch with either of these gentlemen? Thanks View Quote Parts kits out of Russia is going to be a no-go right now as is anything out of Russia. Shipments have come to a screeching halt on all goods. Never mind firearms related items and payment systems. |
|
|
Originally Posted By Gelandewagen: Parts kits out of Russia is going to be a no-go right now as is anything out of Russia. Shipments have come to a screeching halt on all goods. Never mind firearms related items and payment systems. View Quote View All Quotes View All Quotes Originally Posted By Gelandewagen: Originally Posted By LawDog205: Any new information on rusguns guy? What about the receivers from the guy thats more accurate( recreator) was it? And barrels? How do I get in touch with either of these gentlemen? Thanks Parts kits out of Russia is going to be a no-go right now as is anything out of Russia. Shipments have come to a screeching halt on all goods. Never mind firearms related items and payment systems. https://www.rusgunmaster.com/product-page/parts-kit-for-ak12 Rusgunmaster appears to be up and running. However, I haven’t ordered from them in almost a year so who knows if the store is actually operational. Or if you order, whether any shipment will get through. I would err on the side of not trying to order anything and wait to see what happens. Caveat emptor. ETA: @LawDog205 |
|
|
9 hole reviews reviews the AK12:
The AK12 - A failure to modernize. [Russia's newest standard rifle] |
|
|
I can't help but feel it's vogue to shit on Russian equipment now. These kits have been in the US since at least 2020 the GT and other guys making videos then were all for it, and now suddenly it's complete shit? I'll agree there are some things that suck, like the selector and the pointless 2 round burst, but some of the things being repeated feel nitpicky and overblown. Maybe I'm just butthurt because I have a kit
|
|
|
Originally Posted By JoEnge1136: I can't help but feel it's vogue to shit on Russian equipment now. These kits have been in the US since at least 2020 the GT and other guys making videos then were all for it, and now suddenly it's complete shit? I'll agree there are some things that suck, like the selector and the pointless 2 round burst, but some of the things being repeated feel nitpicky and overblown. Maybe I'm just butthurt because I have a kit View Quote Spot on. It is part of the hysterical, anti-Russian trend that is sweeping the forums lately. Real quickly, here are the major grievances and their fixes: 1: The handguard movement issue. There are now four aftermarket handguards that can solve this problem. 2: The lack of a selector stop that prevents travel into the trigger area. There are plenty of selector stops that a home builder can swap out here. Since it is 99% likely you will build these into semi-auto rifles or pistols, I won't address the burst mechanism. 3: The placement of the sling loop. This is a non issue. I respect each of these brave youtubers and their fans, so please don't flood my in-box with death threats. |
|
|
I agree that most of the criticisms are exaggerated, but the top cover not holding zero is a disappointment.
|
|
|
Originally Posted By p-dog: I agree that most of the criticisms are exaggerated, but the top cover not holding zero is a disappointment. View Quote It is what it is. The newest factory generation (seen HERE) has two different handguard options, both aluminum, and both hold zero... so they have corrected the issue. But the older generation unit that has been fielded (the one we all have as a parts kit from demills) is easy to fix with any of the aftermarket options. |
|
|
Originally Posted By BlgSal: Spot on. It is part of the hysterical, anti-Russian trend that is sweeping the forums lately. Real quickly, here are the major grievances and their fixes: 1: The handguard movement issue. There are now four aftermarket handguards that can solve this problem. 2: The lack of a selector stop that prevents travel into the trigger area. There are plenty of selector stops that a home builder can swap out here. Since it is 99% likely you will build these into semi-auto rifles or pistols, I won't address the burst mechanism. 3: The placement of the sling loop. This is a non issue. I respect each of these brave youtubers and their fans, so please don't flood my in-box with death threats. View Quote The 9 hole review criticism basically came down to “what does this do that an AK74m/100 series rifle with aftermarket parts doesn’t do better?” Their argument was that Russia would have been better off updating the existing firearms with aftermarket components, vice adopting an entirely new rifle. Maybe the 74m and 100 series manufacturing equipment is EOL so it was time to upgrade no matter what? Again, for the folks wanting to build clones of the latest Russian military firearms, none of this is an issue. It’s a good looking rifle and appears to be perfectly acceptable in the accuracy department. There is already aftermarket support that fixes most of the problems with the issue weapons. Can’t throw shade on anyone looking for a cool or unique AK build, given what I shoot my 2 gun matches with. But I do think the criticisms leveled so far are valid. That said, the new magazines are awesome. Would love to have some of the 7.62x39 version. |
|
|
Originally Posted By hooooon: I can’t speak for the AK Guy, but the 9 hole reviews folks have struck me as very thoughtful and more interested in firearms than politics (I’ve interacted with Henry a good bit over email since offering to loan them some firearms they haven’t tested yet). I think their criticisms are valid, particularly the part where the dust cover doesn’t hold zero. To the builder in the U.S., this may not matter, but I would have a major problem if I were issued a rifle that didn’t hold zero. The 9 hole review criticism basically came down to “what does this do that an AK74m/100 series rifle with aftermarket parts doesn’t do better?” Their argument was that Russia would have been better off updating the existing firearms with aftermarket components, vice adopting an entirely new rifle. Maybe the 74m and 100 series manufacturing equipment is EOL so it was time to upgrade no matter what? Again, for the folks wanting to build clones of the latest Russian military firearms, none of this is an issue. It’s a good looking rifle and appears to be perfectly acceptable in the accuracy department. There is already aftermarket support that fixes most of the problems with the issue weapons. Can’t throw shade on anyone looking for a cool or unique AK build, given what I shoot my 2 gun matches with. But I do think the criticisms leveled so far are valid. That said, the new magazines are awesome. Would love to have some of the 7.62x39 version. View Quote I see it differently, especially if those criticisms boil down to the handguard issue and the accuracy they were able to pull out of one rifle. Moreover, to me, the "what does it do better than X" question is somewhat mute as it is itself just a slightly more modernized AK100 series with what would be aftermarket parts built into it already. 100% agreement on the magazine, and I would like to see you post your competition rig at some point... but not in this thread as the OP is probably pissed this has become the AK12-mega-debate thread and we should keep it on track! |
|
|
Originally Posted By AEnemaBay: Things are happening. Ignore the different color filament (ran out of one mid print) and the horrible print quality. Wanted to print it fast to make sure it will work and make tweaks before printing it nice: https://i.imgur.com/gMuhBjrl.jpg View Quote Any update on these?? Can't believe no one else got all excited about this! |
|
|
No, my name has nothing to do with enemas.
MO, USA
|
|
AK building addict in recovery.
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.