User Panel
Posted: 8/4/2013 3:37:23 PM EDT
Fairly new to AR15s. Read some reviews of this stuff online at Midway USA. Mostly good, one guy said he used it in Iraq. Anyone here have any experience with it?
Referring to the aerosol version. Shoot straight :) |
|
Rem Oil is in no way shape or form adequate for serious AR use.
It's been best described as a "light sporting oil"... bird guns, etc. Fudd use. Now it would be better than NO LUBE of any kind, but it's a poor choice for the AR. My preference is Froglube because it stays. |
|
I think this answers my own question:
M4 Carbine.net Corrosion Testing I think I'll stick to weapon shield :) |
|
I've heard good things about weapon shield... never tried it though... I have some EWL or whatever Bravo sends out too.
|
|
I use RemOil after shooting to soak/clean parts...not to lube. It is a good cleaner.
|
|
It will work fine if you are going to go shoot a few hundred rounds, clean the gun and re oil it. If you are shooting thousands of rounds bring the can along and relube as necessary. I used to run nothing but remington wonderlube which is nothing but glorified WD-40 and i never had a problem and no excessive wear.
|
|
Quoted:
It will work fine if you are going to go shoot a few hundred rounds, clean the gun and re oil it. If you are shooting thousands of rounds bring the can along and relube as necessary. I used to run nothing but remington wonderlube which is nothing but glorified WD-40 and i never had a problem and no excessive wear. View Quote its fine for a few hundred rounds? This stuff isn't suitable for AR use at all!!! it dries up in like ten shots in a 22 so just imagine an ar. |
|
NO Rem-Oil!
It is a next to worthless very thin product with marginal lubricating properties that does not do the job on firearms as far as I am concerned. MUCH better choices out there. SLIP 2000, Tetra=lube, even CLP. |
|
Its inexpensive and a good cleaner due to the high mineral spirits content.
|
|
I'll use it to clean and keep a protectant oil coat, but not for lube. Except it does replace WD-40 for my household uses.
|
|
Yep, Remoil is a nice wiper/cleaner product.
If your wallet is feeling too thin to pay for a dedicated weapon lube, get a quart of Mobil 1 from the automotive section. |
|
If it's the Rem-Oil with VCI, the VCI works pretty good in a closed space.
But yeah never as a lube. |
|
Why buy aerosol at all? You're paying a lot more for the can and propellant.
H |
|
Quoted:
Yep, Remoil is a nice wiper/cleaner product. If your wallet is feeling too thin to pay for a dedicated weapon lube, get a quart of Mobil 1 from the automotive section. View Quote Look at the above corrosion test from M4 carbine. Mobil 1 was one of the WORST products for preventing rust....it's made for engines, for use in a SEALED system with a pump and FILTER. |
|
I've been using Weapon Shield for a few years now and it has served me well. I have no complaints.
|
|
Quoted:
Look at the above corrosion test from M4 carbine. Mobil 1 was one of the WORST products for preventing rust....it's made for engines, for use in a SEALED system with a pump and FILTER. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Yep, Remoil is a nice wiper/cleaner product. If your wallet is feeling too thin to pay for a dedicated weapon lube, get a quart of Mobil 1 from the automotive section. Look at the above corrosion test from M4 carbine. Mobil 1 was one of the WORST products for preventing rust....it's made for engines, for use in a SEALED system with a pump and FILTER. Read what you quoted again slowly. He said "dedicated weapon LUBE" not corrosion inhibitor |
|
I've tried rem oil. It always burned of in the first few hundred rounds. Giving froglube a try right now. I'll probably use grease next after I run out of fl.
|
|
There are hundreds (if not more) of choices of lubes than can be used to good effect on firearms, and we can debate 'til the cows come home which one is best. Rem-Oil is not one of those.
|
|
The only place i use RemOil on an AR is I spary a little on the trigger group after cleaning. I then blow the excess off with air.
|
|
Quoted:
Read what you quoted again slowly. He said "dedicated weapon LUBE" not corrosion inhibitor View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Yep, Remoil is a nice wiper/cleaner product. If your wallet is feeling too thin to pay for a dedicated weapon lube, get a quart of Mobil 1 from the automotive section. Look at the above corrosion test from M4 carbine. Mobil 1 was one of the WORST products for preventing rust....it's made for engines, for use in a SEALED system with a pump and FILTER. Read what you quoted again slowly. He said "dedicated weapon LUBE" not corrosion inhibitor True... but then he posted that he answered his own question because of the corrosion test and the OP is the one that even posted the link. So about that reading slower thing... Rem Oil is fine on pump shotguns, lever actions, and bolt actions. Not quite so much on semi autos. It's better than nothing, but not something I'd use if I had a choice of almost anything better. It's better than Hoppes #9. It might be ok in extreme cold weather where it might not thicken as much as other lubes though. Alaska, Siberia, Northern Canada, etc. |
|
Quoted:
Fairly new to AR15s. Read some reviews of this stuff online at Midway USA. Mostly good, one guy said he used it in Iraq. Anyone here have any experience with it? Referring to the aerosol version. Shoot straight :) View Quote I've used it. It sucks for everything but door-locks. Rand Innovations CLP is the best stuff I've used, to date. |
|
I have a bottle that's been sitting on my bench for years. Not good for lube IMO. Like others said, it is good for cleaning. I use it on my knives
|
|
Quoted: remoil is rust in a can, so I've heard, never used it. View Quote When liberally applied, it will protect metal parts from corrosion. I stored guns for 5 years in a hot and humid Florida attic. Only one of them developed any rust, and that was a Browning Auto-5, which has some spotting on the barrel. It's not cosmoline, to be sure, but it will do the job. WD-40, on the other hand badly rusted a barrel I sprayed it on, when stored in similar conditions. |
|
As almost everyone has said its worthless. I made the mistake of buying a can because the CLP was sold out. After a few rounds it was all blow off. I use the remaining RemOil for squeaky door hinges.
|
|
I have a can of aerosol Rem-oil from years ago that I now keep in my range bag just in case I need some on-the-spot oil but as stated above, it doesn't last long. I've been using CLP and will go to M-Pro 7 when the CLP gets low. I also use TW25b grease in my handguns that I'm going to try on certain locations on my AR to see how it holds up. Some folks use Mobil1...
|
|
Gents, this is a technical forum. Please keep it that way. -Andrewphillipf
|
|
I love the Rem oil.
I have it in both the spray bottle and aerosol and I use it often..... On my bicycle chains.... |
|
I use it to spray on a rag or cloth and wipe the outside of my guns. I live in humid FL so if I keep a gun in my car for a few days or I carry a revolver for rat shooting at an animal rescue I work at...I wipe that down because it stays outside for 10-12 hours a day every weekend.
It does seem far to cheap and ineffective to use for lubricating firearms. I too have noticed it burnt off after only a few rounds of .22LR. I would NOT use it on my AR's. I use CLP and so far like it. I like the gun scrubber and Break Free high pressure aerosols because they seem to break alot of the carbon loose just with the direct pressure. Plus you can apply to tiny spaces and EXACTLY the amount you want to. I want to try the fire clean and frog lube I keep hearing amazing things about but I kind of think its all a fad. One day its CLP, the next Mpro7, no frog lube...it seems like its all whatever is trendy and stamped "Marine Corp uses this when killing folks". I scrub, clean and oil my weapons EVERYtime they are fired. I think using frog lube that much at the much higer cost is a waste of money. Maybe it would be worth it if it didnt get cleaned everytime. Just my opinion... I may be wrong. |
|
I am new to the AR platform. I have plenty of years experience in Shotguns, bolt action rifles and pistols though. I have used Rem oil and never had a problem with rust, nor with lube. Again, in non-AR platforms. It is a thin oil though, that I will admit. The only two cents I wanted to add was that when it comes down to those corrosion charts you must remember. Corrosion protection doesn't mean it makes for great lube, and making for great lube doesn't mean it will be good for preventing corrosion. I've had no problem with rust using rem oil. I've been thinking about using motor oil for my lube in my AR, since I am currently short on cash. But when it comes to rust, as a auto mechanic, I know it sucks.
|
|
Quoted:
As almost everyone has said its worthless. I made the mistake of buying a can because the CLP was sold out. After a few rounds it was all blow off. I use the remaining RemOil for squeaky door hinges. View Quote I use it for the same thing lol For my ar I use birchwood Casey synthetic gun oil and have never had a problem Never used a gun great before but have been thinking of trying it, anyone tried some? |
|
I use it to condition and recondition the out side of my guns
Both plastic and metal - brings it back to new looking condition . Drench , soak, wipe of and it looks great and its abrasion resistant Cosmetic is all it good for. |
|
Alot of fail in this thread.
Despite the name. Its a teflon lube... Not a grease, not an oil.. Its supposed to dry up and leave a thin dry layer of slick. Hello! Ever buy silicon lube for anything? Like used in a restauraunt? It works the exact same way. Much like the dry lube on steel cased ammo. So saying it sucks cause its not wet is not a good tech explanation. That said, I prefer standard oils... I like cheap and easy. But ive used it when it was what i had at the time without any issue.... |
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.