Surefire X200A on a shotgun?

AR-15 » Lights and Lasers

AR Sponsor:

Site Notices

[ARCHIVED THREAD] - Surefire X200A on a shotgun?

Posted: 9/21/2005 12:49:20 AM EDT

Would a Surefire X200A hold up to the recoil of a shotgun?

Also, which Streamlight mount would be better: The one that mounts on the mag extension, or the one that fits between the magazine and the magazine cap?

Posted: 9/21/2005 5:06:16 AM EDT

[#1]

Quoted:
Would a Surefire X200A hold up to the recoil of a shotgun?

Also, which Streamlight mount would be better: The one that mounts on the mag extension, or the one that fits between the magazine and the magazine cap?

Any LED light would work fine on a shotgun.

C4

Posted: 9/21/2005 6:40:54 AM EDT

[#2]

Quoted:
Would a Surefire X200A hold up to the recoil of a shotgun?

Also, which Streamlight mount would be better: The one that mounts on the mag extension, or the one that fits between the magazine and the magazine cap?

You can use either mount, we also carry a tri-rail aluminum bodied mount if you want something a little stronger.

Posted: 9/21/2005 8:50:02 AM EDT

[#3]

I use an X200 on my Mossberg 500 that lives in my Jeep with a Sidearmor mount. Check out www.sidearmor.com and click on shotgun mounts. This thing doesn't move around like the cheapo mag tube mounts.

Posted: 9/21/2005 1:39:41 PM EDT

[#4]

Laser Devices mount all the way.

http://www.arizonagunrunners.com/cgi-bin/cart.pl?db|laserdevicesdb.dat|Shotgun+Mounts

Posted: 9/21/2005 6:55:24 PM EDT

[#5]

I only plan on mounting an X-200, so I don't need the tri-rail mount.

The magazine cap mount doesn't look like it would slide off, but it looks fragile. If it got bent inwards, wouldn't it block the fore end?

The magazine tube mount seems like it would be the exact opposite.

Please tell me more about each mount.

ETA: The X-200 comes with a rail adapter of some sort. What does it do? Will it allow the X-200 the ability to mount on a USP?

Posted: 9/23/2005 1:55:50 PM EDT

[#6]

bump

Posted: 9/23/2005 2:49:24 PM EDT

[#7]

Quoted:
I only plan on mounting an X-200, so I don't need the tri-rail mount.

The magazine cap mount doesn't look like it would slide off, but it looks fragile. If it got bent inwards, wouldn't it block the fore end?

The magazine tube mount seems like it would be the exact opposite.

Please tell me more about each mount.

ETA: The X-200 comes with a rail adapter of some sort. What does it do? Will it allow the X-200 the ability to mount on a USP?

The ITI mag' tube models are better than mag' cap variant, but it is a polymer mount so its not built for heavy abuse.

The X200's have an adapter plate that allows you to switch from a Universal spec rail (Glock, etc.) to Picatinny a spec rail.

USP mounts are a seperate adapter and will attach to your USP (MR09) / USP-C (MR08) and then you'll attach the X200 to it.

Posted: 9/23/2005 2:54:38 PM EDT

[#8]

Ok, thanks for the info.

[ARCHIVED THREAD] - Surefire X200A on a shotgun?

AR-15 » Lights and Lasers

AR Sponsor:

Warning

Confirm Action

About AR15.COM

Stay Connected

Newsletter

Contact Us