User Panel
Posted: 4/15/2016 6:55:21 AM EDT
Title says is all, submit pics and pros & cons please. I'm think about this because it seems like it would be very easy to use the irons on the gun as well.
|
|
Something like a Trijicon RMR?
An RMR will be my next purchase. Pat Mac runs one and states they are extremely fast coming on target.....we'll see. |
|
Tried a Fast Fire 3 on my shotgun yesterday. It was decent. Not noticeably faster than the ghost ring and front post. I'd bet it's better on an AR as the primary optic (if you're looking for a tiny RDS in general), just because of where your eye positioning with a good cheek weld - compared to a shotgun the eye is lower. I'll probably leave the reflex mounted to my XTR II 1-5x, as a backup RDS, when I use that optic on my AR (normally keep my Sparc 2 mounted).
|
|
|
Do you consider the Aimpoint micro series or Trijicon MRO as small primary optics? If so, Travis Haley has posted pictures of his BCM 9" 300blk rifle with the MRO, and I just got in my Aimpoint T-2 earlier this week (hopefully test it out this weekend).
|
|
|
Quoted:
Fastfires on a couple SBRs with low cheek weld. Swapped the one on the left of for a Holosun 503C with the low mount. http://i241.photobucket.com/albums/ff206/devtucker/ARFCOM%20stuff/IMG_20150526_181651_432.jpg On the .45, the Chaos rear drum has a MP5 style open notch position, so that's what I normally run when using the FF. http://i241.photobucket.com/albums/ff206/devtucker/AR-45/IMG_20150127_244531_977.jpg View Quote You and that damn .45! Take my money!! |
|
|
I have a RMR in a Predator Tactical mount on an AR with my 1-4x scope
I find myself rolling the rifle and using the RMR on shots under 100yds often. Its just so much faster for me than the scope, that is probably just related to not being used to the scope, as it is relatively new to me (using it on an AR) I have some Vortex Razor Red Dots on order (2 months out) to try |
|
.45...
Built it as a rifle years ago, DI, soft shooting, runs like a top with decent ammo. Large hollowpoints can choke it sometimes. Original carbine SBR SBR build threads http://www.ar15.com/forums/t_3_4/656717_.html&page=1&sr=0 http://www.ar15.com/forums/t_3_4/666635_Folding_DI_45_SBR__Round_2_.html |
|
Quoted:
I have a RMR in a Predator Tactical mount on an AR with my 1-4x scope I find myself rolling the rifle and using the RMR on shots under 100yds often. Its just so much faster for me than the scope, that is probably just related to not being used to the scope, as it is relatively new to me (using it on an AR) I have some Vortex Razor Red Dots on order (2 months out) to try View Quote Which scope, makes a difference, they're not all created equal. |
|
Quoted:
Which scope, makes a difference, they're not all created equal. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I have a RMR in a Predator Tactical mount on an AR with my 1-4x scope I find myself rolling the rifle and using the RMR on shots under 100yds often. Its just so much faster for me than the scope, that is probably just related to not being used to the scope, as it is relatively new to me (using it on an AR) I have some Vortex Razor Red Dots on order (2 months out) to try Which scope, makes a difference, they're not all created equal. Vortex PST 1-4 Its a solid scope, just a new thing to be looking through a scope at short range targets Im sure I will like it once I get used to it |
|
|
Quoted:
Aimpoint Micro H1. Works just as well as a full size Aimpoint IMO. Don't really see a downside to the smaller optics. http://s16.postimg.org/5jih10e79/image.jpg View Quote Didn't know it was a small reflex. Did they change the design but keep the tiny field of view 20mm tube? Forgive me if my remark seems smartass, but the thread is about small reflex sights. I do like Aimpoint micros, especially the size and lower weight compared to Aimpoint PRO, but not the tunnel vision and limited FOV compared to the open field of a reflex. Mini reflex sights weigh less than two ounces and only 5 or less with riser and QD mount (depending on riser and mount design). |
|
Quoted:
Aimpoint Micro H1. Works just as well as a full size Aimpoint IMO. Don't really see a downside to the smaller optics. http://s16.postimg.org/5jih10e79/image.jpg View Quote I have a lot harder time getting on target quickly with a micro, then my 30 mm Aimpiont's. For some reason the tube affect is much more prevalent for me with the micros, then a full size 30mm rds. I have never used any of the small halo sights like the RMR, but I did own a Cmore railway reflex, and for me, it was way better then any micro that Iv'e owned. I'm just glad I figured that I don't like micros, before I spent a whole bunch of money on a H1, or T1. |
|
Doesn't seem slower than my PRO to me. Plus I know it will work if the rifle falls off something and lands on the optic. Regarding weight I believe that setup weighs 5.7 ounces.
|
|
Quoted:
Didn't know it was a small reflex. Did they change the design but keep the tiny field of view 20mm tube? Forgive me if my remark seems smartass, but the thread is about small reflex sights. I do like Aimpoint micros, especially the size and lower weight compared to Aimpoint PRO, but not the tunnel vision and limited FOV compared to the open field of a reflex. Mini reflex sights weigh less than two ounces and only 5 or less with riser and QD mount (depending on riser and mount design). View Quote View All Quotes View All Quotes Quoted:
Quoted:
Aimpoint Micro H1. Works just as well as a full size Aimpoint IMO. Don't really see a downside to the smaller optics. http://s16.postimg.org/5jih10e79/image.jpg Didn't know it was a small reflex. Did they change the design but keep the tiny field of view 20mm tube? Forgive me if my remark seems smartass, but the thread is about small reflex sights. I do like Aimpoint micros, especially the size and lower weight compared to Aimpoint PRO, but not the tunnel vision and limited FOV compared to the open field of a reflex. Mini reflex sights weigh less than two ounces and only 5 or less with riser and QD mount (depending on riser and mount design). There is no tunnel vision with both eyes open. Also, less housing means less obstruction so there is a good FOV |
|
Quoted:
There is no tunnel vision with both eyes open. Also, less housing means less obstruction so there is a good FOV View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Aimpoint Micro H1. Works just as well as a full size Aimpoint IMO. Don't really see a downside to the smaller optics. http://s16.postimg.org/5jih10e79/image.jpg Didn't know it was a small reflex. Did they change the design but keep the tiny field of view 20mm tube? Forgive me if my remark seems smartass, but the thread is about small reflex sights. I do like Aimpoint micros, especially the size and lower weight compared to Aimpoint PRO, but not the tunnel vision and limited FOV compared to the open field of a reflex. Mini reflex sights weigh less than two ounces and only 5 or less with riser and QD mount (depending on riser and mount design). There is no tunnel vision with both eyes open. Also, less housing means less obstruction so there is a good FOV I assume anyone who complains about field of view with a micro is using it wrong. |
|
Has anyone used the primary arms sight? I really like the Delta point but its a little pricey for what I had in mind.
|
|
Using a Primary Arms Microdot that rates at 50k hours on an AK-74 and beater AR. Improved the accuracy of both weapons at 100 yards vs standard iron sights.
|
|
Quoted:
Its still not a reflex per OP, nor is it as light, nor does it have a wider, open FOV as the mini reflexes.. I do believe RMR and DeltaPoint Pro are equally rugged. Why are you trolling OP thread and derailing it? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Doesn't seem slower than my PRO to me. Plus I know it will work if the rifle falls off something and lands on the optic. Regarding weight I believe that setup weighs 5.7 ounces. Its still not a reflex per OP, nor is it as light, nor does it have a wider, open FOV as the mini reflexes.. I do believe RMR and DeltaPoint Pro are equally rugged. Why are you trolling OP thread and derailing it? OP never said they were not, if you read the posts by him. The micro series are nice optics for quick shooting, at least dry fire training. I just got my first micro earlier this week and sadly could not shoot it today, so I've been regulated to testing mounting it in various spots and seeing where I like it best. I've found just in front of my rear sight is easiest to pick up quickest. I've tried one eye closed and both open, either works for me. |
|
1 thing that is important to me is how easy it is to use mt iron sights with the optic mounted on the rifle. Example: Optic fails, switch to irons is simply flip up rear sight, rock out on the trigger.
|
|
Quoted:
Its still not a reflex per OP, nor is it as light, nor does it have a wider, open FOV as the mini reflexes.. I do believe RMR and DeltaPoint Pro are equally rugged. Why are you trolling OP thread and derailing it? Aimpoint Micro both eyes open is still 20mm and has lots of hardware blocking FOV. Reflex sights do not. Here is a comparson, and yes, you are obstructed by tube and turrets both eyes open with Aimpoint Micro. Not saying it is a bad sight. It has its points, but it loses big time on FOV and is not what we are discussing in this thread. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Doesn't seem slower than my PRO to me. Plus I know it will work if the rifle falls off something and lands on the optic. Regarding weight I believe that setup weighs 5.7 ounces. Its still not a reflex per OP, nor is it as light, nor does it have a wider, open FOV as the mini reflexes.. I do believe RMR and DeltaPoint Pro are equally rugged. Why are you trolling OP thread and derailing it? Aimpoint Micro both eyes open is still 20mm and has lots of hardware blocking FOV. Reflex sights do not. Here is a comparson, and yes, you are obstructed by tube and turrets both eyes open with Aimpoint Micro. Not saying it is a bad sight. It has its points, but it loses big time on FOV and is not what we are discussing in this thread. According to Wiki a red dot is a reflective or "reflex" sight. And when you use both eyes open, what one eye misses, the other eye sees. And no a RMR or Delta Point are not as durable as a micro. Please drop one out of a helicopter or hit it with an IED and get back to me. |
|
A friend and I did some rough comparisons by shooting the same course of fire at 50m, each with a 1-4x scoped set on minimum mag and then with a dot sight (Eotech in this particular case). Both of us were faster with the Eotech.
I personally prefer MRDS because of the massively reduced sight body clutter in my sight picture. imho the advantage of the the tube type sights is they are less likely to be affected by adverse weather such as heavy rain/snow if this may be an issue where you shoot. Durability is an issue, but not a major one for me as I don't generally bounce my rifles off hard things. Arguably they have less surface area to catch/snag/bang up against anything if you do like throwing your rifle down the driveway. Incidentally, I once accidentally smacked an ACOG mounted Docter MRDS on a steel girder, with such force that it bent the top of the shroud and chipped the lens, effectively writing the sight off. It still held it's original zero when tested. The RMR was developed to have increased durability with it's thick shroud, but at the cost of blocking out more of your sight picture. Your choice..https://www.youtube.com/watch?v=CSH7h6ZQbnM Docter is still my overall favourite.. |
|
Quoted:
Shouldn't be a problem with any sight you are considering. The compact size of a mini reflex might give you more options since so little rail space is used. I still have three slots behind mine, before the rear sight, even with the reflex set back four slots from the front of the upper. http://i1366.photobucket.com/albums/r772/gbloss/0514B050-37E4-4DD2-B376-2B4A3C46DBFE_zpskh2o0ay2.jpg View Quote View All Quotes View All Quotes Quoted:
Quoted:
1 thing that is important to me is how easy it is to use mt iron sights with the optic mounted on the rifle. Example: Optic fails, switch to irons is simply flip up rear sight, rock out on the trigger. Shouldn't be a problem with any sight you are considering. The compact size of a mini reflex might give you more options since so little rail space is used. I still have three slots behind mine, before the rear sight, even with the reflex set back four slots from the front of the upper. http://i1366.photobucket.com/albums/r772/gbloss/0514B050-37E4-4DD2-B376-2B4A3C46DBFE_zpskh2o0ay2.jpg Hey MS, what kind of rear buis is that? They look so thin...are those m-bus pros? |
|
So, I know that the Delta point and others are better than the Primary arms offering, but I want to try this out without spending a bunch. Has anybody tried the PA one?
|
|
Quoted:
Hey MS, what kind of rear buis is that? They look so thin...are those m-bus pros? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
1 thing that is important to me is how easy it is to use mt iron sights with the optic mounted on the rifle. Example: Optic fails, switch to irons is simply flip up rear sight, rock out on the trigger. Shouldn't be a problem with any sight you are considering. The compact size of a mini reflex might give you more options since so little rail space is used. I still have three slots behind mine, before the rear sight, even with the reflex set back four slots from the front of the upper. http://i1366.photobucket.com/albums/r772/gbloss/0514B050-37E4-4DD2-B376-2B4A3C46DBFE_zpskh2o0ay2.jpg Hey MS, what kind of rear buis is that? They look so thin...are those m-bus pros? Yes, MBUS Pro. |
|
Quoted:
So, I know that the Delta point and others are better than the Primary arms offering, but I want to try this out without spending a bunch. Has anybody tried the PA one? View Quote Which PA model are you looking at? If it is their mini reflex, I would pass. If budget is an issue the Burris Fastfire III is quite good. I moved mine to a tactical shotgun after I got the DP Pro for the carbine. It handles 12 gauge recoil just fine. Turkey hunters have been using them for years on hard kicking magnum shotguns. Heck of a well-made reflex. I just wanted the extra steel hood protection of the DP Pro and its always ready motion activation. You can pick up the FF3 with riser and rail mount for just over $200 shipped. Optics Planet is running a 12% off special right now which will bring their goodcprice down even more. Ime dure other vendors would be competitive. |
|
Quoted:
According to Wiki a red dot is a reflective or "reflex" sight. And when you use both eyes open, what one eye misses, the other eye sees. And no a RMR or Delta Point are not as durable as a micro. Please drop one out of a helicopter or hit it with an IED and get back to me. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Doesn't seem slower than my PRO to me. Plus I know it will work if the rifle falls off something and lands on the optic. Regarding weight I believe that setup weighs 5.7 ounces. Its still not a reflex per OP, nor is it as light, nor does it have a wider, open FOV as the mini reflexes.. I do believe RMR and DeltaPoint Pro are equally rugged. Why are you trolling OP thread and derailing it? Aimpoint Micro both eyes open is still 20mm and has lots of hardware blocking FOV. Reflex sights do not. Here is a comparson, and yes, you are obstructed by tube and turrets both eyes open with Aimpoint Micro. Not saying it is a bad sight. It has its points, but it loses big time on FOV and is not what we are discussing in this thread. According to Wiki a red dot is a reflective or "reflex" sight. And when you use both eyes open, what one eye misses, the other eye sees. And no a RMR or Delta Point are not as durable as a micro. Please drop one out of a helicopter or hit it with an IED and get back to me. How do you know? The Deltapoint Pro is a finalist in the current DoD optics evaluation trials. You don't get to that point if not duty grade. You can call a tube micro a reflex if you want, but we all know what this thread is referring to - screen type small reflex sights with no exposed knobs or turrets and no tube tunnel effect. I am not knocking the Aimpoint micros. They are simply apples and oranges for this discussion. http://soldiersystems.net/2015/11/09/ussocom-evaulates-replacement-for-eotech-sights/ |
|
I think I'm gonna get a set. I like how low profile they are.
|
|
Quoted:
How do you know? The Deltapoint Pro is a finalist in the current DoD optics evaluation trials. You don't get to that point if not duty grade. You can call a tube micro a reflex if you want, but we all know what this thread is referring to - screen type small reflex sights with no exposed knobs or turrets and no tube tunnel effect. I am not knocking the Aimpoint micros. They are simply apples and oranges for this discussion. http://soldiersystems.net/2015/11/09/ussocom-evaulates-replacement-for-eotech-sights/ View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Doesn't seem slower than my PRO to me. Plus I know it will work if the rifle falls off something and lands on the optic. Regarding weight I believe that setup weighs 5.7 ounces. Its still not a reflex per OP, nor is it as light, nor does it have a wider, open FOV as the mini reflexes.. I do believe RMR and DeltaPoint Pro are equally rugged. Why are you trolling OP thread and derailing it? Aimpoint Micro both eyes open is still 20mm and has lots of hardware blocking FOV. Reflex sights do not. Here is a comparson, and yes, you are obstructed by tube and turrets both eyes open with Aimpoint Micro. Not saying it is a bad sight. It has its points, but it loses big time on FOV and is not what we are discussing in this thread. According to Wiki a red dot is a reflective or "reflex" sight. And when you use both eyes open, what one eye misses, the other eye sees. And no a RMR or Delta Point are not as durable as a micro. Please drop one out of a helicopter or hit it with an IED and get back to me. How do you know? The Deltapoint Pro is a finalist in the current DoD optics evaluation trials. You don't get to that point if not duty grade. You can call a tube micro a reflex if you want, but we all know what this thread is referring to - screen type small reflex sights with no exposed knobs or turrets and no tube tunnel effect. I am not knocking the Aimpoint micros. They are simply apples and oranges for this discussion. http://soldiersystems.net/2015/11/09/ussocom-evaulates-replacement-for-eotech-sights/ Yup, I have a couple of the larger aim points, nice stuff. I was faster with my eotech, really like the delta point but not ready to fork over the $$$ on that right now. |
|
Money no object, I think the Leupold Delta Point Pro would be my choice to go on a carbine. I like the idea of a less-obstructed FOV, and the motion-activation is a plus too. If I get around to building a lightweight carbine, I would definitely consider a MRDS for it. My Fastfire 3 is a better size for pistol use, but just seems more fragile than the Delta Point.
|
|
I didn't have a Delta point budget, but may have to just wait a little, going to see if they are in stock locally to eye ball one in person soon.
|
|
Quoted:
Money no object, I think the Leupold Delta Point Pro would be my choice to go on a carbine. I like the idea of a less-obstructed FOV, and the motion-activation is a plus too. If I get around to building a lightweight carbine, I would definitely consider a MRDS for it. My Fastfire 3 is a better size for pistol use, but just seems more fragile than the Delta Point. View Quote if it had NV settings, it would be absolutely perfect. Alas. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.