Quoted: I know this has been probably asked before but I can not seem to find anything on this question. Sooo here goes.... I have a NIB Colt SP slab sided lower with a .315 front pivot /takedown pin hole. I recently picked up a NIB LMT M-4- type upper with .250 front and rear pin holes. My question is, can I use KNS push button release pins in place of the Colt two part screw pivot pin in order to mate the LMT Upper with the Colt SP Lower? If not any other suggestions on how to do this i.e products that are availiable?? I'd like to avoid to the two part Colt pin but, if I have no choice, than thats' that!!
Thanks for all your help! |
You would need a large hole lower to small hole upper adapter, KNS are either straight pin small hole .250" dia. or large hole .315" dia. they won't work.
Here's the link of what I used before, but most offset pin adapter usually rotates and you have to rotate the adapter pin slightly to align the rear takedown pin, the best way is just to match a large hole upper to a large hole lower, same with the small hole uppers and lowers, which is what I did.
Now I have modern small pivot hole Colt and LMT lowers.
http://www.cdnninvestments.com/arunfrcopinn.html