User Panel
User Panel
User Panel
|
Posted: 11/20/2008 8:08:20 PM EDT
[Last Edit: Lancelot]
Yes, they are hard to come by, but may be some of the best uppers on the planet. So, show them off here.
I'll start. BCM 16" M4 upper.     |
|
|
|
WA, USA
|
Posted: 4/10/2020 8:36:22 PM EDT
[#1]
|
|
|
|
Posted: 4/11/2020 12:57:56 PM EDT
[#2]
 An old friend redone. BCM 14.5" government profile barrel with pinned muzzle brake. BCM BCG and charging handle. Daniel Defence Omega X rail. IWC / HSP Thorntail SBR light mount with Surefire Scout light. Magpul XTM rail covers in factory foliage green and OD. Aimpoint PRO with the Midwest Industries QD base on the factory Aimpoint mount. KAC 300M rear sight. B5 SOPMOD Bravo Stock. BCM Gunfighter pistol grip in factory foliage green. Magpul polymer trigger guard. Magpul PMAG Gen 2. It is interesting to note that the PMAG and the stock were black. They did not come in foliage green. The XTM rail panels came from the factory in foliage green and OD green. So the stock and the magazine were (gasp) painted with a spray can. The color is almost a perfect match, although my cell phone camera shows it more shiny than it is. If you want foliage green, here is the secret. Rust-Oleum, Dark Green, 249322, Automotive Self Etching Primer Spray Paint. It is available at Lowe's, possibly Home Depot, and off of Amazon which is where I got mine. Beware that sometimes on line retailers say it is gray. Be sure you get the dark green. |
|
|
|
|
Posted: 4/11/2020 1:00:05 PM EDT
[#3]
  |
|
|
|
|
Posted: 4/11/2020 1:08:01 PM EDT
[#4]
|
|
|
|
|
Posted: 4/11/2020 1:12:52 PM EDT
[#5]
BCM 14.5” Upper and BCM Lower
 BCM 11.5” upper on spikes lower 
|
|
|
|
|
Posted: 4/11/2020 4:00:53 PM EDT
[#6]
Quote HistoryOriginally Posted By SuburbanNinja23: https://i.imgur.com/iFIUhpuh.jpg I'm digging the black MC funiture. It adds just that little "something" that makes it look good without painting everything. Did you have it done or did you purchase it somewhere? |
|
|
|
WA, USA
|
Posted: 4/11/2020 5:50:28 PM EDT
[#7]
Quote HistoryOriginally Posted By SecretSquirell: I'm digging the black MC funiture. It adds just that little "something" that makes it look good without painting everything. Did you have it done or did you purchase it somewhere? I bought all the furniture from join force enterprises. I dig it a lot as well and the coating holds up really well. |
|
|
|
Posted: 4/11/2020 7:26:52 PM EDT
[#8]
Quote HistoryOriginally Posted By SuburbanNinja23: I bought all the furniture from join force enterprises. I dig it a lot as well and the coating holds up really well. Quote HistoryOriginally Posted By SuburbanNinja23: Originally Posted By SecretSquirell: I'm digging the black MC funiture. It adds just that little "something" that makes it look good without painting everything. Did you have it done or did you purchase it somewhere? I bought all the furniture from join force enterprises. I dig it a lot as well and the coating holds up really well. 
|
|
|
|
MI, USA
|
Posted: 4/11/2020 7:36:42 PM EDT
[#9]
Quote HistoryOriginally Posted By Lancelot: If you want foliage green, here is the secret. Rust-Oleum, Dark Green, 249322, Automotive Self Etching Primer Spray Paint. It is available at Lowe's, possibly Home Depot, and off of Amazon which is where I got mine. Beware that sometimes on line retailers say it is gray. Be sure you get the dark green. Really nice job on that color match, I can't even tell. I would have thought all the furniture came like that as a matching set if you didn't say anything. |
|
|
|
Posted: 4/12/2020 9:17:31 AM EDT
[#10]
 16" midlength BCM Goes bang every time, with everything...and hits whatever I point it at. And made in my home state an hour away from me. |
|
|
|
|
Posted: 4/14/2020 4:56:11 PM EDT
[Last Edit: GreenSuiter]
[#11]
 This is the full rifle BCM Reece 14, 14.5 Midlength w/ QRF rail that I won during the 2019 Team Member Giveaway... EOTech is a placeholder, this will be getting a 1-6 variable at some point. Edit- Here it is in it final configuration...  
|
|
|
|
|
Posted: 4/15/2020 9:19:32 PM EDT
[#12]
|
|
|
|
|
Posted: 4/20/2020 11:29:59 AM EDT
[#13]
BCM Lower, BCM 14.5" Enhanced Medium Weight Fluted upper, Razor, Specwar 556K.
|
|
|
|
|
Posted: 4/21/2020 7:45:58 AM EDT
[#14]
Quote HistoryOriginally Posted By EHilderbrand: BCM Lower, BCM 14.5" Enhanced Medium Weight Fluted upper, Razor, Specwar 556K. https://live.staticflickr.com/65535/49797416018_d59cd6543d_b.jpg I wish they would bring back the SpecWar 556K, I need a few more |
|
|
|
|
Posted: 4/21/2020 9:17:35 AM EDT
[#15]
Quote HistoryOriginally Posted By cone256: I wish they would bring back the SpecWar 556K, I need a few more I just took possession of this one on 4/6/2020 - I'm very happy with it. I like the boring look of it, so to speak. Sounds great too on the 14.5. |
|
|
|
|
Posted: 4/22/2020 7:25:57 AM EDT
[#16]
Quote HistoryOriginally Posted By EHilderbrand: I just took possession of this one on 4/6/2020 - I'm very happy with it. I like the boring look of it, so to speak. Sounds great too on the 14.5. Quote HistoryOriginally Posted By EHilderbrand: Originally Posted By cone256: I wish they would bring back the SpecWar 556K, I need a few more I just took possession of this one on 4/6/2020 - I'm very happy with it. I like the boring look of it, so to speak. Sounds great too on the 14.5. Yeah I have two of them. One sits on my 10.3" SBR in the HD role and the 2nd rotates between whatever else I'm shooting. |
|
|
|
|
Posted: 6/2/2020 7:35:45 AM EDT
[#17]
|
|
|
|
|
Posted: 6/2/2020 9:42:30 AM EDT
[#18]
|
|
|
|
|
Posted: 6/5/2020 3:32:15 PM EDT
[#19]
Quote HistoryMore bcm guns need urx rails 
|
|
|
|
|
Posted: 6/5/2020 3:43:48 PM EDT
[#20]
|
|
|
|
|
Posted: 6/6/2020 8:20:20 PM EDT
[#21]
|
|
|
|
|
Posted: 6/6/2020 8:35:26 PM EDT
[#22]
Quote HistoryOriginally Posted By Creature: https://www.AR15.Com/media/mediaFiles/153820/20200604_192815_jpg-1448210.JPG What color? I like it. |
|
|
|
|
Posted: 6/7/2020 7:18:29 AM EDT
[Last Edit: Creature]
[#23]
Quote HistoryOriginally Posted By SecretSquirell: What color? I like it. Aervoe Olive Drab 987A (34087). IMO, it works extremely well. I am not a fan of camo on a rifle, so I go strictly monochromatic. Most DIY camo jobs are ridiculously busy...or worse, have too much dark shades in them, which defeats the purpose of rattlecan paint jobs. Aervoe OD is not too light...but more importantly, it's not too dark.  Attached File Attached File Attached File |
|
|
|
|
Posted: 6/7/2020 10:31:42 AM EDT
[Last Edit: RyanH]
[#24]
|
|
|
|
|
Posted: 6/7/2020 10:47:26 AM EDT
[#25]
Quote HistoryOriginally Posted By Creature: Aervoe Olive Drab 987A (34087). IMO, it works extremely well. I am not a fan of camo on a rifle, so I go strictly monochromatic. Most DIY camo jobs are ridiculously busy...or worse, have too much dark shades in them, which defeats the purpose of rattlecan paint jobs. Aervoe OD is not too light...but more importantly, it's not too dark. https://www.AR15.Com/media/mediaFiles/153820/20200507_072700_jpg-1450713.JPG https://www.AR15.Com/media/mediaFiles/153820/20191128_134052_jpg-1450714.JPG https://www.AR15.Com/media/mediaFiles/153820/20190825_144832_jpg-1450716.JPG Quote HistoryOriginally Posted By Creature: Originally Posted By SecretSquirell: What color? I like it. Aervoe Olive Drab 987A (34087). IMO, it works extremely well. I am not a fan of camo on a rifle, so I go strictly monochromatic. Most DIY camo jobs are ridiculously busy...or worse, have too much dark shades in them, which defeats the purpose of rattlecan paint jobs. Aervoe OD is not too light...but more importantly, it's not too dark. https://www.AR15.Com/media/mediaFiles/153820/20200507_072700_jpg-1450713.JPG https://www.AR15.Com/media/mediaFiles/153820/20191128_134052_jpg-1450714.JPG https://www.AR15.Com/media/mediaFiles/153820/20190825_144832_jpg-1450716.JPG Awesome, thanks. I pretty much use Aervoe exclusively. I might have to pick up a can of the OD, most OD that I find is a bit too green or dark for what I'm usually going for. |
|
|
|
|
Posted: 6/7/2020 2:51:32 PM EDT
[#26]
Quote HistoryOriginally Posted By SecretSquirell: Awesome, thanks. I pretty much use Aervoe exclusively. I might have to pick up a can of the OD, most OD that I find is a bit too green or dark for what I'm usually going for. It is an amazing color...it changes depending on lighting like a chameleon.  Attached File Attached File Attached File |
|
|
|
TX, USA
|
Posted: 6/17/2020 6:30:50 PM EDT
[#27]
|
|
|
|
Posted: 6/17/2020 6:58:45 PM EDT
[#28]
|
|
|
|
|
Posted: 6/18/2020 3:42:30 PM EDT
[Last Edit: dingus_actual]
[#29]
Quote HistoryThis rig of yours is always one I enjoy seeing pop up in threads. Great looking rifle. ETA: Pic thread of a BCM I had a couple years ago:  Attached File |
|
|
|
|
Posted: 8/17/2020 9:16:08 AM EDT
[Last Edit: Maack]
[#30]
Quote HistoryOriginally Posted By nate_the_great: This rig of yours is always one I enjoy seeing pop up in threads. Great looking rifle. ETA: Pic thread of a BCM I had a couple years ago: https://www.AR15.Com/media/mediaFiles/381888/bcm_rig_jpg-1466696.JPG Thanks. Here's another build with a BCM upper and lower with a Rainier Arms barrel. 
|
|
|
|
|
Posted: 8/17/2020 3:36:48 PM EDT
[Last Edit: Brok3n]
[#31]
 On the left: - BCM 12.5 upper with Midwest Industries MLOK handguard, BCM bolt/carrier, Geissele Airborne Charging Handle, with KVP Linear Comp - Complete PSA Lower with SBA3 using BCM H2 buffer and Sprinco Blue Spring - EOTech 3-0 optic with Magpul Pro backup sights - Streamlight ProTac 1 with Arisaka Offset Mount - Painted in a custom Battleship Grey with FDE furniture from Magpul and BCM On the right: - BCM MK2 14.5 P/W to 16" ELW upper, Cold Hammer Forged barrel, with MCMR-13 Handguard - Lantac Black Nitride bolt/carrier, Geissele Airborne Charging Handle, with extended A2 flash hider - Complete BCM lower using BCM H2 buffer and Sprinco Blue Spring - EOTech 3-0 optic/magnifier with Scalarworks Peak fixed Front Sight and Magpul Pro adjustable backup sight - Streamlight ProTac 1 with Arisaka Inline Mount - Went with a black and tan theme here with mostly BCM furniture and a B5 System Bravo stock |
|
|
|
VA, USA
|
Posted: 8/21/2020 8:26:04 PM EDT
[Last Edit: CalebWBrink2000]
[#32]
 BCM 12.5" MCMR10 5.56 Upper * BCM FDE Ionbonded BCG * Radian Raptor charging handle * Magpul MBUIS Pros * Aimpoint T2 on a Scalarworks Mount * Railscales polymer handstop * Magoul Type 2 Panels * Surefire M300C on an Arisaka in-line M-Lok mount w/a Cloud Defensive LCS. * Surefire SF3P Aero Precision M4E1 lower * Forward Controls ambi/enhanced LPK * Radian Talon safety * Geissele SSA-E * BCM grip * SBA3 w/Splitfix * H2 buffer, Springco blue * Ferro Concepts Slingster |
|
|
|
Posted: 8/21/2020 9:34:03 PM EDT
[#33]
Quote HistoryOriginally Posted By CalebWBrink2000: https://i.imgur.com/2kKr7uD.jpg BCM 12.5" MCMR10 5.56 Upper * BCM FDE Ionbonded BCG * Radian Raptor charging handle * Magpul MBUIS Pros * Aimpoint T2 on a Scalarworks Mount * Railscales polymer handstop * Magoul Type 2 Panels * Surefire M300C on an Arisaka in-line M-Lok mount w/a Cloud Defensive LCS. * Surefire SF3P Aero Precision M4E1 lower * Forward Controls ambi/enhanced LPK * Radian Talon safety * Geissele SSA-E * BCM grip * SBA3 w/Splitfix * H2 buffer, Springco blue * Ferro Concepts Slingster Very like! 
|
|
|
|
|
Posted: 8/23/2020 3:04:11 PM EDT
[#34]
Quote HistoryOriginally Posted By Brok3n: https://www.AR15.Com/media/mediaFiles/65378/20200722_171832-1514814.jpg On the left: - BCM 12.5 upper with Midwest Industries MLOK handguard, BCM bolt/carrier, Geissele Airborne Charging Handle, with KVP Linear Comp - Complete PSA Lower with SBA3 using BCM H2 buffer and Sprinco Blue Spring - EOTech 3-0 optic with Magpul Pro backup sights - Streamlight ProTac 1 with Arisaka Offset Mount - Painted in a custom Battleship Grey with FDE furniture from Magpul and BCM On the right: - BCM MK2 14.5 P/W to 16" ELW upper, Cold Hammer Forged barrel, with MCMR-13 Handguard - Lantac Black Nitride bolt/carrier, Geissele Airborne Charging Handle, with extended A2 flash hider - Complete BCM lower using BCM H2 buffer and Sprinco Blue Spring - EOTech 3-0 optic/magnifier with Scalarworks Peak fixed Front Sight and Magpul Pro adjustable backup sight - Streamlight ProTac 1 with Arisaka Inline Mount - Went with a black and tan theme here with mostly BCM furniture and a B5 System Bravo stock |
|
|
|
|
Posted: 8/23/2020 4:35:32 PM EDT
[#35]
While only one is a true upper, most have MCMRs
|
|
|
|
USA
|
Posted: 8/26/2020 8:48:11 AM EDT
[#36]
Here's one I just got recently. I bought the upper and lower separately and just pieced the other stuff together over a couple of weeks. Pretty much just a stock Enhanced LW Fluted barrel build. It's super light, even with that heavy prismatic optic on it.
|
|
|
|
Posted: 9/10/2020 12:21:11 PM EDT
[#37]
Quote HistoryOriginally Posted By forteefiveseventee: Here's one I just got recently. I bought the upper and lower separately and just pieced the other stuff together over a couple of weeks. Pretty much just a stock Enhanced LW Fluted barrel build. It's super light, even with that heavy prismatic optic on it. https://i.imgur.com/crLJM17.jpg Measured weight (no mag)? |
|
|
|
USA
|
Posted: 9/10/2020 8:32:11 PM EDT
[#38]
Sorry just saw this. This crappy forum doesn't notify me of new posts on subscribed forums...
Without the sling (Blue Force Gear Vickers) or the optic/mount, but with the light and VFG, it's 6.6lbs. |
|
|
NC, USA
|
Posted: 9/11/2020 3:46:19 PM EDT
[#39]
 |
|
|
|
Posted: 9/28/2020 9:40:38 AM EDT
[#40]
|
|
|
|
NC, USA
|
Posted: 9/28/2020 10:02:42 AM EDT
[#41]
|
|
|
|
Posted: 10/2/2020 8:33:54 AM EDT
[#42]
|
|
|
|
TX, USA
|
Posted: 10/3/2020 1:18:20 AM EDT
[Last Edit: flgfish]
[#43]
  16” MCMR upper, BCM lower. |
|
|
TN, USA
|
Posted: 10/3/2020 11:03:59 AM EDT
[#44]
MK2 Upper with a 10" KMR and Criterion 11.5 barrel.
|
|
|
SC, USA
|
Posted: 10/3/2020 12:50:46 PM EDT
[#45]
BCM 300 BLK 9” complete upper and lower.
Middle firearm- 
|
|
|
ME, USA
|
Posted: 10/3/2020 4:46:41 PM EDT
[#46]
DV8,
What barrel length and rail, also are you using griffin direct thread taper Mount. |
|
|
|
Posted: 11/9/2020 6:31:20 PM EDT
[#47]
 |
|
|
|
|
Posted: 11/10/2020 10:36:14 AM EDT
[#48]
Picked this up yesterday. 11.5" with the MKII Upper, Gov Profile Barrel.
|
|
|
|
|
Posted: 11/20/2020 11:39:03 AM EDT
[Last Edit: NickOTime]
[#49]
Just finally started messing with some non clone/non KAC stuff. I am already digging the weight savings! BCM QRF 10 and BCM stripped upper with an 11.5" Faxon Gunner middy barrel.
  Considering some form of Unity riser combo and possibly an Aimpoint t2 or m5. That might have to wait until after the holidays though. |
|
|
|
NC, USA
|
Posted: 11/25/2020 2:16:10 PM EDT
[#50]
Searched high and low for one of these babies and found one locally...got a great price on it too. The Seller billed it as a complete up, the only problem was he didn't know what a real BCM charging handle should look like...an educated consumer is a happy consumer.
 Current config... 
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
