Quoted:
Quoted: do you happen to know what size this pin is?
|
0.312" long X 0.081" diameter
|
Translated = 5/16" long and 5/64" in diameter. Any hardware store should have something close.
If longer, whip out the dremel and cut till you can do better if you want to shoot right away.
Danny
ETA:
---------------------- LENGTH-------------- DIAMETER
A1 sight drum roll pin--- 1/4" - 0.250------------ 1/16” - 0.062
F/A pawl roll pin-------- 1/4" - 0.250------------ 1/16” - 0.062
Charge handle latch roll pin---- 1/4" - 0.250------------ 1/16” - 0.062
A2 windage drum roll pin- 3/8” - 0.375------------ 1/16” - 0.062
Bolt ejector roll pin---- 7/16” - 0.437---------- 1/16” - 0.062
Gas tube roll pin---- 5/16”- 0.312----------- 5/64” – 0.081
Bolt catch roll pin- 7/16” - 0.437----------- 3/32” – 0.093
Elevation housing roll pin- 5/8” – 0.625----------- 3/32” – 0.093
F/A retaining roll pin- 5/8” – 0.625----------- 3/32” – 0.093
Trigger guard roll pin- 5/8” – 0.625----------- 3/32” – 0.093