Quoted: Who must one kill to get a company to offer an A2 gov't profile 1/7 rifle right from the factory without special orders and such?
Sorry, small rant that seemed on-topic.
Scott
|
Bravo Company MFG, Inc. (BCM) is working on the barrel that you want.
Here's their description of their new barrels:
All barrels will have factory M4 feedramps (as will all upper receivers)
All 5.56 NATO barrels will have 1/7 twist
All made from Milspec 4150 barrel steel
All barrels will be chrome lined
All barrels will have the taller milspec F-marked FSB, .750
All barreled uppers will be flat tops with laser etched T-marks
All 5.56 NATO barrels will have the government profile under the handguards (some possible exceptions for future special profiles)
The first profiles that will be released will be 16" M4,
then 20" government , then 16" Mid length (government profile).
As a note, the details are being worked out for a Group-Buy on the BCM 16" Mid length barrels through Grant at G&R Tactical.
They're stating according to their thread (link below) that the first model 16" M4 will be released by September and the 20" will follow shortly after that.
Bravo Co. Mfg. thread link in the Industry sectionETA: Scotter260, there is your answer in the post above this post, contact Bravo Co.