Quoted: As for the buttstock, a member (sorry I can't recall who) used an inch of velcro with an adhesive back. He used the "furry" part.
Remove the stock, adhere velco strip on top end of the tube (horizontally), then try to put the stock back on. If it wont fit right away or is too tight for your taste, then just trim the fuzz a little at a time until you achieve a snug fit! Worked for me!
|
thats pretty clever, spy and worth a try
a-newbie, I have to confess that I was thinking (or wasn't thinking).
A2 stocks when you mentioned some play in the stock.
don't know why, but thats happening more and more lately (my wandering mind)
traditional M4 style stocks do inherently have a bit of play, and some more than others. It bothers me especially on a $1,000 rig or heaven for bid a $3,000 shooter
I have gone to the LMT/SOPMOD, or Crane style in mine and do not have that issue any longer. Bu thats a $200 fix and not for everyone
I think - like spy says- adding material of some type in between the stock and buffer tube is OK, as long as it isn't over-done.